Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

二维抛板极限速度的相似性与古尼公式的采用

本文分析影响被炸药驱动下抛板极限速度的重要因素,讨论了一些经验公式的适用范围;提出了根据二维抛板的数值计算得到的两个重要规律:①在炸药与抛板的质量比相同的情况下,抛板的极限速度之间具有一定的相似关系;②修正的古尼公式可用来计算二维抛板的极限速度。     

激光推进发动机与激光发射弹道主要参数分析

激光推进是一种应用前景广阔的先进推进技术。讨论了激光推进发动机性能参数,飞行器在无大气阻力并忽略地球曲率和自转条件下发射与入轨所要求的最佳比冲,激光平均功率与电网能量消耗等问题。指出用激光发射微小卫星可以得到高质量比,激光推进发动机最优的比冲为12 240m/s。     

用能量法确定层状复合材料疲劳裂纹的扩展方向

含裂纹体疲劳寿命的预测,必须首先了解裂纹扩展路径的全过程,而在层状复合材料中,裂纹扩展的路径非常复杂,不仅可以拐弯,而且可以分叉.因此,首先提出一个简单、适用、统一的裂纹扩展方向的相对强度准则,即应变能释放率比值判据;然后,利用有效解决高梯度问题的数值方法--任意线法,对实测试件的关键时刻(例如,拐弯或进入界面),进行了数值分析;并对典型试件进行了疲劳断裂实验研究.3方面的结果,得到相互的验证.这种一致性,不仅初步证明了这一方法的正确性和适用性,而且为疲劳裂纹扩展全过程的解决,提供了必要的基础.     

基于似然比检验的橡胶密封件加速试验机理一致性判别方法

加速退化试验广泛应用于橡胶密封件等长寿命产品的可靠性评估,试验过程中需要将高应力水平下的试验结果外推到正常应力水平。要获得准确的产品可靠性评估结果,需要保证加速应力下的退化失效机理与正常应力下的退化失效机理一致。基于似然比检验原理,提出加速退化试验机理一致性判别方法及流程。针对失效机理一致与失效机理变化两种场合,提出对数线性及非对数线性两类加速模型,并结合混合效应模型描述产品退化过程。利用似然比检验判断加速模型参数是否变化,完成失效机理一致性判别。仿真算例和应用实例表明,该方法能够有效判别橡胶密封件失效机理是否变化,并找到失效机理不变的应力水平边界。     

浮式振荡立轴叶轮的三维效应影响

为研究振荡运动下立轴水轮机的三维效应影响,采用ANSYS CFX软件三维模拟立轴水轮机在不同展弦下的振荡运动（横荡、纵荡）,并与二维模拟的立轴水轮机作对比,通过最小二乘法拟合计算得到水轮机推力和侧向力系数时域结果,分析得到不同展弦比下水轮机阻尼系数和附加质量系数。结果表明：随着展弦比增大,叶轮潮流能的转换效率逐渐增大;三维振荡叶轮的水动力载荷与叶轮展长呈正相关,当展弦比达到10时其水动力载荷及能量转换效率和二维的计算结果相当;三维水轮机水动力系数常数项和阻尼项随展弦比增大而增大。     

均匀分布法对集群目标射击效率计算积分表达式

为简化炸点均匀分布条件下对集群目标射击效率计算的表达式,采用"化四个象限积分为一个象限积分"的方法,导出射击幅员在正面和纵深上覆盖集群目标比值数学期望的积分表达式,在此基础上讨论对单个目标毁伤概率计算公式和对集群目标毁伤百分比计算的近似公式,导出射击幅员在正面和纵深上覆盖集群目标比值二阶矩的积分表达式,给出了对集群目标射击效率的算例。结论改进了对集群目标射击效率计算的方法。     

电驱动车辆反馈线性化自适应滑模滑移率控制

针对驱动和制动工况下电驱动汽车的滑移率控制这一强非线性和不确定性控制问题,提出了一种基于反馈线性化的自适应滑模控制(ASMC)方法。针对车辆驱动、制动工况下的车轮滑移率进行了动力学分析,建立了统一的状态方程。充分利用系统已知模型和参数,采用线性化反馈消除非线性变化的控制量增益系数的影响,通过对反馈项增益参数的自适应调整,适应附着路面不确定参数变化的控制要求,克服系统控制中存在的主要非线性和不确定性部分,对于系统难以建模描述部分,视为扰动,利用滑模控制抑制系统该部分的不确定性因素,同时保证系统响应的快速性,并对算法进行了Lyapunov稳定性分析。最后,以某型电动汽车为对象进行了仿真分析,结果表明采用ASMC控制系统动态响应快、精度高、抗扰能力强,对路面参数变化具有较强的鲁棒性,同时输出控制量抖振小。     

油水两相分层流层流流速分布计算分析

利用剪切力比模型,进一步讨论了油水两相分层流层流流动的速度分布规律,将水相流速假设为抛物线形式分布与实验结果有较大偏差,将水相分为拖曳和返流两段更接近实际情况,模型所得水相计算结果更接近实验数据。指出剪切力比模型能否适合于油水两相分层流动计算理论需要更多实验结果验证。     

On competitive analysis for polling systems

Polling systems have been widely studied, however most of these studies focus on polling systems with renewal processes for arrivals and random variables for service times. There is a need driven by practical applications to study polling systems with arbitrary arrivals (not restricted to time-varying or in batches) and revealed service time upon a job's arrival. To address that need, our work considers a polling system with generic setting and for the first time provides the worst-case analysis for online scheduling policies in this system. We provide conditions for the existence of constant competitive ratios, and competitive lower bounds for general scheduling policies in polling systems. Our work also bridges the queueing and scheduling communities by proving the competitive ratios for several well-studied policies in the queueing literature, such as cyclic policies with exhaustive, gated or l-limited service disciplines for polling systems.