网络中心战战场精确时间的同步技术

本文阐述网络中心战战场的时间同步技术、精确时间体系结构、双向比对远距离时间同步技术。对各种时间获取技术进行了比较,对GPS定时原理作了较为详细的说明。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

一种统一的拓扑关系判断模型

拓扑关系是地理信息系统领域中一种非常重要的空间关系。当前已经提出了多种模型来对空间对象间的拓扑关系进行判断,但是这些模型都不能判断那些由点、线、多边形任意组合而成的异构几何集合对象间的拓扑关系。针对当前拓扑关系研究的不足,引入了混合几何的概念和正规化准则,基于此空间对象模型和维扩展9交集模型,提出了一个拓扑关系判断模型—集成型维扩展9交集模型(IDE 9IM),它不但能够判断单一的点、线、面以及同构几何集合对象间的拓扑关系,而且还能从复杂空间对象的总体和局部两个方面对异构几何集合对象间的拓扑关系进行判断,可以作为一个判断任意几何对象间拓扑关系的统一模型。     

单极化圆台相控阵天线的空域极化特性

针对水平或垂直极化偶极子激励的单极化圆台相控阵天线,建立了其电扫描时空域极化特性的数学模型.理论分析和仿真结果表明单极化圆台相控阵天线的空域极化比随观测角偏离法线方向的角度单调递增,随斜面倾角增大而单调递减.同时,圆台相控阵天线的方向图与阵元极化方式、波束指向角以及观测角有关.圆台阵面规模越大,方向图和空域极化变化越丰富.以上结论为基于圆台相控阵天线空域极化特性的极化散射矩阵测量、极化滤波和抗干扰等研究提供了理论依据,为全极化圆台相控阵天线设计、极化特性分析和极化校准等研究奠定了理论基础.     

一种面向复杂地理空间栅格数据处理算法并行化的任务调度方法

随着并行计算技术的成熟,地理空间栅格数据处理算法的并行化研究成为新的热点。聚焦于处理流程包含多个计算步骤的复杂地理空间栅格数据处理算法,基于空间计算域理论,提出了一个随着算法处理流程而动态变化的任务调度方法。实验证明,该方法在算法流程的每一个计算步都会调整任务分组方案,因此相比于传统任务调度方法,任务调度的负载均衡效果更好,并行算法程序的运行时间更短。     

确定Kelvin模型粘弹性材料参数的一种实验方法

从Kelvin模型和Euler-bernoulli梁理论出发,利用弹性-粘弹性相应原理和弹性材料动力学理论得出粘弹性梁的动力学方程。利用中心差分法分析了粘弹性材料悬臂梁的动态函数。根据振动特性,将材料参数与梁应变响应周期及振幅衰减相联系;利用这种联系,提出了测定Kelvin模型粘弹性材料参数的一种简单实验方法;分别取不同长度的橡胶悬臂梁进行了相应的实验,测出了材料的剪切模量和粘性系数;分析实验结果,得出一些有益的结论。     

军事院校校园空间环境与特色的创造——后勤工程学院新校区概念性规划设计

军事院校担负着培养和造就高素质新型军事人才的使命,军事院校校园空间环境应有自己鲜明的特色.着重介绍了后勤工程学院新校区概念性规划设计方案的主要思想,提出了尊重自然环境条件,创建生态化、园林式的校园环境;尊重地域文化,体现历史传承和军校特色的设计理念.力求创造一个以人为本,能体现当代军事校园精神风貌的场所和空间环境,创建一种可持续发展的校园规划建设模式.     

二次差频测距新方法及其性能分析

提出了一种基于二次差频测距的新方法。对其测距原理进行了详细推导,提出了简化发射机设计与便于后续信号处理的频点选取准则,理论分析了正确解模糊对信噪比的要求。通过与参差多频测距方法进行比较,分析了该方法的优越性。仿真结果验证了该方法的有效性。     

基于联合傅里叶变换测量CCD图像采集系统的像素问距

分析了CCD图像采集系统的像素间距测定的必要性,指出了靶板标定方法的缺点,介绍了联合傅里叶变换测量原理,给出了用测定CCD图像采集系统像素间距的测量装置以及测量方法。得到了实际测量的数据,并对数据进行了分析。     

基于相位差变化率方法的单站无源定位技术

无源定位技术有着广阔的应用前景 ,文中在现有单站无源定位方法的基础上 ,介绍了相位差变化率定位法。该方法利用观测平台上两个相互正交的相位干涉仪接收目标辐射电磁波的相位差获取目标的方向信息 ,利用对应的相位差变化率获取目标的径向距离信息 ,从而实现对目标的实时高精度交叉定位。还给出了观测平台水平直线匀速飞行且无飞行姿态变化条件下的定位表达式。仿真结果表明 ,该方法是一种极具发展前途的单站无源定位方法