爆炸成型弹丸贯穿靶板靶后破片空间分布模型

深空撞击载荷对探测小天体内部物质成分和结构特性具有重要意义,因此,在考虑爆炸成型弹丸(explosively formed projectile, EFP)可变截面的特性和区分靶后破片来源的基础上,建立了EFP贯穿靶板靶后破片空间分布模型。在靶板厚度30 mm至70 mm、EFP着靶速度1 650 m/s至1 860 m/s的条件下,该模型可以定量预测靶后破片云中各个破片的速度、质量、数量与空间位置的关系。结果表明,相对速度总是随相对空间位置的增加而呈线性增加,相对质量、相对数量总是随相对空间位置的增加而呈幂函数增加。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。     

Quantification of projection angle in fragment generator warhead

Tactical Ballistic Missile (TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead (FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement logic. For conventional axi-symmetric warhead, dispersion is assumed to be normal with a standard deviation of 3⁰. However, such information is not available in case of FGW. Hence, a set of experiments are conducted to determine the dispersion of fragments. The experiments are conducted with a specific configuration of FGW in an identical arena to quantify the scatter and then verified its applicability to other configurations having a range of L/D and C/M ratios, and contoured fragmenting discs. From the experimental study, it is concluded that the scatter in projection angle follows normal distribution with a standard deviation of 0.75° at Chi-square significance level of 0.01(χ²_0.99).     

营房管理可视化系统设计方案

利用地理信息技术、数据库技术以及办公自动化技术提出了营房可视化管理系统设计方案,实现了空间数据的上传下载以及与营地实力系统数据的导入导出;并根据面向对象技术实现了对空间图层类、信息窗体类和属性数据维护类的封装,为改变传统的营房管理模式,实现营房的信息化、可视化管理作了一定的探讨。     

基于标注事件图的空间数据库主动规则终止性分析

主动规则的终止性分析强化了规则的设计高效性。给出主动规则元模型的概念作为主动规则终止性分析和比较的基础;对精化触发图进行扩展,提出标注事件图分析模型。结合实例给出终止性分析算法。与各种方法的对比说明标注事件图是可应用于终止性分析的通用抽象模型。     

【将军论坛】科技创新思维的哲学基础、本质特征与实践要求分析

科学技术是核心战斗力,科技创新思维是开启科技创新的“金钥匙”。为实现科技兴军目标,必须高度重视对科技创新思维的研究。本文首先提出马克思主义哲学是指导科技创新思维的锐利思想武器,并从唯物论、辨证法及认识论三个方面进行了论证;其次提出科技创新思维的三个本质特征,即新颖性、全维度和多样性;最后从五个方面提出科技创新思维的实践要求,即深刻认识创新对象、紧贴创新目标要求、重视创新实践探索、建构积淀创新知识、忠于坚守创新追求。     

COSMIC掩星电子密度廓线的质量检核

利用COSMIC掩星任务自2010年至2014年的电离层电子密度廓线,使用只考虑廓线自身特性的4种参数进行质量检核,并对廓线质量的时空分布进行分析。发现在廓线质量的空间分布上,廓线不合格率在高纬地区最高,其次是低纬地区,在中纬地区最低,这可能与电子密度分布在磁赤道附近存在赤道异常、两极地区的磁场强度最大有关。廓线质量的季节变化较明显,在南、北半球,冬、春两季的廓线不合格率均显著高于夏、秋两季。另外,廓线质量具有一定昼夜分布特性,不合格率白天明显较夜晚低,且在晨昏分界线上变化较大。合格廓线的电子密度峰值和峰值高度分布在磁赤道附近明显高于其他区域,呈现"双驼峰"现象。     

军校学报创新发展战略的理性思考

军校学报编辑部必须树立科学发展观,针对制约军校学报学术质量提高的各种因素,发挥主观能动性,积极采取有效措施,通过长期不懈地努力,促进军校学报学术质量的提高,促进特色栏目的发展,促进精品期刊的壮大,促进军事学术的繁荣。