A three-stage model for the perforation of finite metallic plates by long rods at high velocities

A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages: (1) initial penetration; (2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.     

多年冻土区管道的设计技术研究

在多年冻土地带铺设油气管道,是国际能源战略发展的必然,但由于冻土具有冻胀和融沉特性,因此,选用合适的管道设计方法保证管道安全运行一直是一大研究热点。通过对多年冻土区管道所承受载荷类型的分析,论证了采用基于应变的管道设计方法的合理性,并着重对拉伸应变极限和压缩应变极限的确定方法进行了探讨,指出在实际设计中,应该选用相对宽松的压缩应变极限值和严格的拉伸应变极限值。     

一类二阶微分方程Poincaré分岔极限环的不存在性

讨论一类二阶微分方程x¨+εf(x,x.)x.+g(x)=0的Poincar分岔极限环的不存在性,利用一阶Mel’nikov函数直接从整体上进行分析讨论,得出了若干充分条件和判别准则。     

广义Liénard方程Poincaré分岔极限环的唯一性和不存在性

讨论了一类广义Linard方程x¨+f1(x)x.2+εf2(x)x.+g(x)=0的Poincar分岔极限环的唯一性和不存在性。将不对Abel积分进行分项,而是利用一阶Mel′nikov函数直接从整体上进行分析讨论,得出了若干判别准则和充分条件。     

一类生化反应动力系统的极限环

研究生化反应中一类饱和反应的数学模型dxdt =a1 -xy a2 y2dydt=a3 xy-a2 y2 - vyy b应用微分方程定性理论 ,完整地解决了该系统极限环的存在性、唯一性和不存在性等问题。     

Estimating distribution functions from partially observed samples

Suppose that some components are initially operated in a certain condition and then switched to operating in a different condition. Working hours of the components in condition 1 and condition 2 are respectively observed. Of interest is the lifetime distribution F of the component in the second condition only, i.e., the distribution without the prior exposure to the first condition. In this paper, we propose a method to transform the lifetime obtained in condition 1 to an equivalent lifetime in condition 2 and then use the transformed data to estimate F. Both parametric and nonparametric approaches each with complete and censored data are discussed. Numerical studies are presented to investigate the performance of the method. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 521–530, 2000     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

伺服系统直流调速系统的改进型内模PD-I控制方法

为提高直流调速系统的控制性能,提出了一种改进型内模PD-I控制器的设计方法。根据直流电机的运行原理,建立了电机输出转速与输入电压变化率之间的数学模型,基于内模控制(Internal Model Control,IMC)原理和Taylor级数展开,设计了一种内模PD控制器,且可通过选择系统的截止频率实现控制器参数的整定。为了获得系统调节所需的控制作用,可将内模PD控制器与积分环节相串联构成改进型内模PD-I控制器,仿真和实验结果表明本方法可使系统获得更好的控制性能。     

基于转速分析的柴油机加速性能和气缸气密性的评价方法

对不同使用摩托小时的坦克柴油机的加速、减速时间进行检测和分析,利用Bayes Bootstrap模拟统计方法对转速特征值进行处理,获得了更准确的特征分布．采用动态聚类方法对样本特征进行分类,实现了对柴油机加速性能和气缸气密性的等级评价．     

膨润土-砂混合型缓冲／回填材料液塑限试验

为研究掺砂率对高庙子膨润土一砂混合型缓冲／回填材料液塑限的影响,利用液塑限联合测定仪进行了试验研究,并运用最小二乘法对混合物液塑限试验数据进行了分析。试验结果表明膨润土一砂混合物的可塑性、液塑限值和塑性指数均随掺砂率的增大而降低。对试验结果进行分析,得到了考虑掺砂率影响的混合物液塑限经验公式。混合物的液塑限并不是随掺砂率增大成比例降低,而是液限的实测值小于理论值,塑限的实测值大于理论值。得到的不同掺砂率的膨润土一砂混合型缓冲／回填材料液塑限试验数据可为高放废物深地质处置库建设提供科学依据。