A search game taking account of attributes of searching resources

This article deals with a two‐person zero‐sum game called a search allocation game (SAG), in which a searcher and a target participate as players. The searcher distributes his searching resources in a search space to detect the target. The effect of resources lasts a certain period of time and extends to some areas at a distance from the resources' dropped points. On the other hand, the target moves around in the search space to evade the searcher. In the history of search games, there has been little research covering the durability and reachability of searching resources. This article proposes two linear programming formulations to solve the SAG with durable and reachable resources, and at the same time provide an optimal strategy of distributing searching resources for the searcher and an optimal moving strategy for the target. Using examples, we will analyze the influences of two attributes of resources on optimal strategies. © 2007 Wiley Periodicals, Inc. Naval Research Logistics 2008     

进气道角度对含硼推进剂固冲发动机性能的影响

为了提高含硼推进剂固体火箭冲压发动机内硼颗粒的燃烧效率,采用颗粒轨道模型进行了补燃室两相流的数值模拟,其中硼颗粒的点火和燃烧模型采用的是King模型,建立了发动机补燃室内简单反应流模型,在该模型下研究了进气道的位置对非壅塞固体火箭冲压发动机燃烧效率的影响,并在此基础上进行直连式试验研究.结果表明,后进气道角度为60°时的燃烧效率比90°时高.     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

一种高效的显式模型检验方法

随着软硬件系统规模和功能的不断扩充,状态空间爆炸问题严重影响了模型检验的进一步发展与应用,成为验证大规模系统的瓶颈.在显式模型检验工具Murphi的基础上,针对其可达状态空间组织存在的问题进行改进,提出了基于整型指针与Fibonacci散列的可达状态空间组织方法,实现了一个高效的显式模型检验原型系统,在确保验证正确的同时有效缩短了验证时间,并能在系统规范不可满足的情况下给出反例,有助于系统设计人员快速定位错误.理论分析和实验结果表明了本方法的有效性.     

布尔函数的Walsh谱绝对值分布及其性质研究

提出并研究了布尔函数的Walsh谱绝对值分布.指出布尔函数Walsh谱绝对值分布在仿射变换下的不变性,计算了n(n≤5)元布尔函数的Walsh谱绝对值分布,研究了Walsh谱绝对值分布与Walsh谱支撑和Walsh谱中非零取值个数以及其他一些密码学难题的联系,最后研究了布尔函数的Walsh谱绝对值分布的大小.     

基于循环子空间理论的线性系统测试矩阵优化

研究了线性定常系统在循环指数大于1(即其约当标准形不同的约当块有重根)的情况下测试矩阵的优化方法.以循环子空间相关定理的证明为基础,根据根向量链的相关特性,得到了测试向量的线性和与系统观测性的直接关系,给出了在保证系统可观测性的同时,使得测试代价最小的测试矩阵优化方法.算例表明,提出的方法简单直观,对配置测试向量具有良好的工程价值.     

冲压增程弹进气道设计方法与性能分析

以冲压增程弹为应用背景进行了进气道设计.结合增程弹的特点,讨论了轴对称进气道中心锥参数、喉道参数、外罩参数的选择.特别对进气道唇口处参数、扩张段角度设计方法进行了分析.设计了单锥混压式、单锥外压式以及双锥混压式三种进气道,并进行了数值模拟.分析了进气道主要设计参数对其性能的影响.数值结果表明,就增程弹的性能要求而言,双锥混压式进气道的性能较高.     

机动目标一维距离像RAT法线性化补偿

研究了机动目标宽带线性调频脉冲回波全去斜率信号模型,根据速度和加速度的调频频谱展宽特点,提出了机动目标宽带一维距离像线性化调频回波模型,给出了Radon模糊图转换(RAT)法线性参数估计与运动补偿方法,并进一步分析了测速和测距误差.仿真实验验证了RAT法一维距离像线性化参数估计与补偿,表明该方法很好地解决了运动参数未知情况下机动目标的一维距离像频谱展宽问题.     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

空间目标RCS序列的R/S分析

RCS包含了目标丰富的信息.分析了空间目标RCS序列产生混沌的机理,并非线性理论中的功率谱法引入空间目标RCS序列的分析中,用重整标度分析法(R/S)分析了空间目标RCS序列的混沌特性,仿真结果表明,与旋转目标相比,三轴稳定目标RCS序列较复杂和不规则,这与实际分析的情况相符合,证明了该方法的有效性.