中国特色社会主义事业发展布局的创新与发展

十八大首次将经济、政治、文化、社会和生态五大建设并列,强调“五位一体”建设中国特色社会主义。由此,中国特色社会主义发展布局历经四个阶段,即：“一个中心,两个基本点”的战略布局,“三位一体”发展布局,“四位一体”发展布局,“五位一体”发展布局。“五位一体”总体布局是一个相互联系、相互协调、相互促进、相辅相成的有机整体,对于开创中国特色社会主义事业新局面意义重大,为到本世纪中叶基本实现社会主义现代化,提供了有力支撑。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。     

【将军论坛】科技创新思维的哲学基础、本质特征与实践要求分析

科学技术是核心战斗力,科技创新思维是开启科技创新的“金钥匙”。为实现科技兴军目标,必须高度重视对科技创新思维的研究。本文首先提出马克思主义哲学是指导科技创新思维的锐利思想武器,并从唯物论、辨证法及认识论三个方面进行了论证;其次提出科技创新思维的三个本质特征,即新颖性、全维度和多样性;最后从五个方面提出科技创新思维的实践要求,即深刻认识创新对象、紧贴创新目标要求、重视创新实践探索、建构积淀创新知识、忠于坚守创新追求。     

How pressure for change challenge military organizational characteristics

This article elaborates on how structural, normative and functional pressures for change may challenge military organizational characteristics. We problematize theoretically and exemplify empirically what consequences these pressures can have on military organizational characteristics, arguing that they constitute major challenges for managing in particular normative pressures for change. The empirical examples suggest that bureaucratic, hierarchical, narcissistic and greedy traits of the organization are challenged by normative pressures such as value changes and normalization. Another source of challenge is professionalization processes. Structural challenges, on the other hand, are managed by the organization and do not seem to inhibit the workings of organizational characteristics. The plausibility probe conducted questions the sustainability of military organizational characteristics in their traditional disguise, in particular due to legitimacy concerns. It is suggested that future research should be directed towards analyzing how military organizations manage pressure for change and whether their characteristics are questioned.     

空降作战的制约因素及前瞻

空降力量是联合作战力量的重要组成部分,空降作战是实施高技术条件下作战的重要手段,因此也是各国争相研究的课题,而空降作战指挥是制约空降作战效能发挥的主要因素。本文从空降作战指挥的特点出发,剖析了空降作战指挥的影响因素,通过对现代战争的形势分析对空降作战指挥的发展趋势做出了合理的预判。      

信息化战争背景下联合特种作战任务新特点

文章从任务内涵向新域拓展、任务效应向战略辐射、任务空间向多维扩展、任务环境向复杂发展和任务标准向精确要求等方面,分析了现代陆军重要作战形式“信息化联合特种作战”遂行任务的新特点和新变化,研究新型陆军未来作战。     

军用无人机目标特性综述

军用无人机作为一类典型的空中目标,分析其目标特性有着重要的军事意义和技术价值。为系统介绍军用无人机的目标特性,从应用和设计的角度分析探讨了其作战使用、结构、飞行和电磁辐射等特性的基本特点,可为工程设计与使用人员提供参考。     

基于建模仿真的靶标验证与确认方法研究

在武器系统试验鉴定中,靶标模拟威胁目标的逼真程度直接关系到试验结果的可信度,关系到靶场试验质量和效益。因此,在武器系统试验鉴定中科学规范地选择靶标、评估靶标对试验结果的影响至关重要。本文分析在试验选靶中进行靶标验证和确认的需求,解析相关概念,阐述了建模仿真对靶标的验证和确认的重要作用;以空中靶标为例,重点研究基于建模仿真的靶标验证与确认方法。