自旋稳定动能拦截器轨控发动机推力控制

提出了大气层外自旋稳定式动能拦截器的一种典型轨控发动机阵列布局.在分析小发动机工作的各种约束条件的基础上,推导了发动机推力角度、推力大小和冲量效率的计算公式,提出了发动机工作的控制方法.在各种初始条件下进行拦截仿真,所得的脱靶量均在0.3 m以内,可视为直接碰撞命中目标.同时通过仿真分析了冲量效率与自旋速度、发动机工作时间、每圈发动机个数的关系.     

MEMS惯性测量组合在无人机飞行参数测量中的应用

介绍了在无人机飞行试验中应用MEMS微惯性测量组合来解算飞行姿态、速度位置等参数的某个实例.试验结果表明,由此系统所得到的数据及曲线能够很好地描述实际飞行过程.试验数据为进一步地相关分析提供了有利的依据.     

坦克装甲车辆火控观瞄系统发展趋势分析

从火控总体的角度总结了国内外坦克装甲车辆火控观察瞄统的发展过程、现状,分析了观察瞄统的发展特点.对新近发展起来的顶置遥控武器站进行了初步研究,对其应配属的观瞄系统形式进行了探讨.在对未来装备需求和技术发展深入分析的基础上,提出了坦克装甲车辆火控观瞄系统未来的发展方向和需要重点突破和解决的关键技术.     

红外成像型空空导弹目标自动识别技术

针对红外导弹和红外诱饵弹的对抗,构建了红外导引头图像探测器的透视投影几何模型.基于模型证明了飞机和目标在不同距离和相对飞行速度下,成像序列中相邻两帧图像间飞机目标的相似性,并且提出了适合导弹的目标快速识别算法,该算法是基于当前帧图像与前一帧图像的目标特征匹配的.最后以实测的飞机及诱饵红外图像数据对文中提出的算法进行了仿真,仿真结果表明了算法对目标识别是可行和有效的,并且能够满足较高实时性的要求.     

基于SINS/DVL/GPS的AUV组合导航技术

为了提高自主水下航行器组合导航系统的精度,选择了捷联式惯性导航系统(SINS)和多普勒速度声纳(DVL)导航为主、GPS卫星导航系统为辅的组合导航方法.通过Kalman滤波技术对组合导航的误差状态进行了估计,并采用反馈校正的方法修正SINS的导航误差.仿真结果表明SINS/DVL/GPS的组合导航可以有效地提高水下航行器SINS/DVL组合导航系统的导航精度,满足AUV远距离航行的精度需求.     

Research on simultaneous localization and mapping for AUV by an improved method: Variance reduction FastSLAM with simulated annealing

At present, simultaneous localization and mapping (SLAM) for an autonomous underwater vehicle (AUV) is a research hotspot. Aiming at the problem of non-linear model and non-Gaussian noise in AUV motion, an improved method of variance reduction fast simultaneous localization and mapping (FastSLAM) with simulated annealing is proposed to solve the problems of particle degradation, particle depletion and particle loss in traditional FastSLAM, which lead to the reduction of AUV location estimation accuracy. The adaptive exponential fading factor is generated by the anneal function of simulated annealing algorithm to improve the effective particle number and replace resampling. By increasing the weight of small particles and decreasing the weight of large particles, the variance of particle weight can be reduced, the number of effective particles can be increased, and the accuracy of AUV location and feature location estimation can be improved to some extent by retaining more information carried by particles. The experimental results based on trial data show that the proposed simulated annealing variance reduction FastSLAM method avoids particle degradation, maintains the diversity of particles, weakened the degeneracy and improves the accuracy and stability of AUV navigation and localization system.     

Clustered coverage orienteering problem of unmanned surface vehicles for water sampling

This study investigates a clustered coverage orienteering problem (CCOP), which is a generalization of the classical orienteering problem. The problem is widely motivated by the emerging unmanned techniques (eg, unmanned surface vehicles and drones) applied to environmental monitoring. Specifically, the unmanned surface vehicles (USVs) are used to monitor reservoir water quality by collecting samples. In the CCOP, the water sampling sites (ie, the nodes) are grouped into clusters, and a minimum number of nodes must be visited in each cluster. With each node representing a certain coverage area of the water, the objective of the CCOP is to monitor as much as possible the total coverage area in one tour of the USV, considering that overlapping areas provide no additional information. An integer programming model is first formulated through a linearization procedure that captures the overlapping feature. A two-stage exact algorithm is proposed to obtain an optimal solution to the problem. The efficiency and effectiveness of the two-stage exact algorithm are demonstrated through experiments on randomly generated instances. The algorithm can effectively solve instances with up to 60 sampling sites.     

全液压驱动管道机器人公理化设计

随着管道机器人应用领域与任务需求的不断增大,机器人设计中存在的问题日益突出,如输出功能相互耦合、定位精度不高以及复杂环境下可靠性低。针对石油水平井对于管道机器人的特殊应用需求,将公理化设计理论应用到机器人系统设计中,创新设计一种基于挠性支撑结构的全液压驱动管道机器人。概述公理化基本原理与设计过程,对全液压驱动管道机器人进行概念设计,完成设计耦合性分析。确定机器人机械系统与液压系统具体结构组成,并分析其工作机理。应用AMESim软件,对机器人运动原理方案进行仿真分析,结果表明:全液压驱动管道机器人可以实现自动往复运动,牵引力可以达到30 kN,运动速度可以达到0.12 m/s;机器人牵引能力与运动速度可以完成单独调节,从而实现解耦设计。     

固体药燃气逆向喷流热防护有效性分析

针对高超声速飞行器逆向喷流介质供应,采用固体药燃烧产生的燃气作为喷流的介质,来减小供应系统的质量与体积。采用数值计算的方法对高速飞行器球头逆向喷流流场进行数值模拟,分析不同飞行条件下高温燃气对球头热防护的影响。研究表明,采用高温燃气会减弱逆向喷流的热防护效果,但是对比无逆向喷流的驻点热流,最大热流仍然存在大幅度的下降。通过调节喷流压力,在不增加喷流质量的情况下,高温燃气逆向喷流可以取得与常温介质一致的热防护效果。针对6马赫数以上的飞行,现有的固体药燃气温度能够对飞行器头部实现有效的热防护。     

指挥引导模型的自动生成

介绍了传统指挥引导模型的建立方法,并分析了其不足;提取出战法属性并分析总结了战法的共同点;作为使用数据库技术进行引导解算的基础,引入了敌我相对态势表、飞行方式表、战法属性表的概念;结合实例,在传统指挥引导建模的基础上,给出了一种新的建模方法,提出了通用模型建立的初步思想,有利于指挥引导模型自动生成的实现.