火炮装药温度分布的数值模拟

针对火炮弹药的特点,建立了弹药的二维轴对称模型,并在圆柱坐标系下,用控制容积积分法导出一组差分离散格式。采用收敛速度快的块迭代法解代数方程组。实验数据表明数值计算的结果和实测值基本一致,经进一步研究可以用于火炮装药的温度测量。     

电磁主动悬架的建模及仿真研究

根据电磁学原理,利用电磁铁作为主动悬架的作动器,构造出电磁作动器的一般结构.在1/4汽车悬架基础上,建立了电磁主动悬架的非线性模型,应用现代控制理论设计了该模型的次优控制器,对模型进行分析、仿真.结果表明,电磁悬架能够实现一般主动悬架的功能,满足车辆平顺性的要求,可以应用于汽车的悬架系统.     

升压变换装置研制过程中难点问题的解决

结合大功率数字式全电力炮控系统所用的升压变换装置(270 V/32 A)的研制,详细阐述了尖峰电压、偏磁现象、波形振荡产生的机理,并从理论上提出了解决上述问题的方法.研制过程中,通过推挽式变压器的合理设计、控制方案的完善、总体布局的优化等一系列技术措施,较好地抑制了尖峰电压、偏磁、波形振荡的产生;试验结果表明所采取措施的有效性和正确性.     

激光辐照下45#钢板响应特性

采取实验和数值模拟相结合的方法对激光辐照45#钢板的响应特性进行研究。基于连续光纤激光发射系统,开展钢板的激光辐照实验,得到温度场分布及靶板的烧蚀穿孔特性;基于ANSYS建立靶板有限元模型,模拟激光辐照下靶板的热响应过程,得到了靶板厚度、激光功率和光斑直径等因素对靶板温度分布及靶板穿孔特性的影响规律。     

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

This paper studies the four-engine liquid rocket flow field during the launching phase. Using three-dimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model, an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors, including wedge-shaped flame deflector and cone-shaped flame deflector, are calcu-lated. The finite-rate chemical kinetics is used to track chemical reactions. The simulation results show that afterburning mainly occurs in the mixed layer. And the region of peak pressure occurs directly under the rocket nozzle, which is the result of the direct impact of exhaust plume. Compared with the wedge-shaped flame deflector, the cone-shaped flame deflector has great performance on guiding exhaust gas. The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction, respectively. The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2% and 9.9% higher than those for the cone-shaped flame deflector. The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.     

Disruption management in production planning

We study the problem of recovering a production plan after a disruption, where the disruption may be caused by incidents such as power failure, market change, machine breakdown, supply shortage, worker no‐show, and others. The new recovery plan we seek after has to not only suit the changed environment brought about by the disruption, but also be close to the initial plan so as not to cause too much customer unsatisfaction or inconvenience for current‐stage and downstream operations. For the general‐cost case, we propose a dynamic programming method for the problem. For the convex‐cost case, a general problem which involves both cost and demand disruptions can be solved by considering the cost disruption first and then the demand disruption. We find that a pure demand disruption is easy to handle; and for a pure cost disruption, we propose a greedy method which is provably efficient. Our computational studies also reveal insights that will be helpful to managing disruptions in production planning. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

铜包钢绞合导体与铜钢混绞导体的耐蚀性比较

通过电化学腐蚀原理的分析,认为被复线用铜包钢绞合导体是用铜钢混绞导体耐蚀性的3倍,有效提高了被复线的野外使用性能.与装备电缆通用的钢丝、铜丝混绞或混编导体或屏蔽层相比,铜包钢丝还兼有更好的耐蚀性、导电性、导磁性和力学性能,是一类优良的电磁屏蔽用导体材料,为装备线缆的设计采用和性能提高提供了防腐依据.     

高频电磁注入替代辐照耦合装置的设计研究

为提高电磁注入法的应用频带范围,提出基于定向耦合原理的电磁注入方法,并以某天线及其射频前端构成的互连系统为试验对象,利用单定向耦合器作为注入装置进行了辐照和注入试验,试验证明该注入方法能够准确替代连续波辐照效应试验．进而,理论分析耦合装置的特性并对该装置进行改进,提高其工程实用性．最后,设计耦合装置的指标并计算了对应的散射矩阵,制作完成注入装置的样机．结果表明：耦合装置监测端电压与等效源之间的关系会受到受试设备状态的影响．将两单定向耦合器级联作为注入装置,并以监测端的功率作为等效依据,可保证监测结果在高频时不受线缆上驻波的影响,提高试验的准确性．     

基于磁记忆检测技术的即时报警功能设计与实现

根据金属磁记忆检测技术中缺陷判定依据的运算特点,为减少程序计算量、提高缺陷检测效率,改进了传统缺陷判定算法．在检测设备基本结构基础上增加了信号调理卡,并借助多功能采集卡的数字输出功能实现了缺陷检出时的即时报警,大幅提高了检测系统的工作效率．     

油-水旋流器流场数值模拟研究

采用改进后的双方程湍流模型和SIMPLE计算方法,对切流式单入口油-水旋流器内部流场进行了模拟研究。结果表明:旋流器内部三维流场各向异性,即同一位置流体在不同方向的流动参数变化很大,流体质点在不同条件下的运动轨迹、速度、分离特性等方面都有较大差别;圆柱段与圆锥段的流场在柱锥结合面发生变化,旋流器的主要分离过程在圆锥段完成;单入口旋流器的流场中心与几何中心有偏差,对流场的稳定和分离会产生影响。该模拟结果与他人所做实验结果比较接近,说明该模型和算法是可靠的,为旋流器的实际应用提供了参考。