多爆炸成型弹丸性能参数灰关联分析

为了获得各参数对多爆炸成型弹丸毁伤性能的影响程度,以EFP速度和MEFP发散角为参考序列,以药型罩和装药参数为比较序列,运用灰关联理论对影响MEFP毁伤性能的参数进行了灰关联分析。在此基础上,应用灰关联分析结果完成了MEFP战斗部优化设计。结果表明:在较少样本空间前提下,采用灰关联理论可以分析获得影响多爆炸成型弹丸毁伤性能的各因素主次关系,而且经过优化后的MEFP战斗部,大大地提高了EFP的集聚性和毁伤性能。     

智能制造技术和智能制造系统

智能制造技术（ＩＭＴ）和智能制造系统（ＩＭＳ）是当今先进工业国家争相开发和探索的高技术领域之一。本文简要地介绍了该项技术的基本内容和原则,并着重从智能控制的高度概述了制造过程建模与信号分析,控制策略与方法等核心技术。本文还通过一个实例简介了ＩＭＳ的结构,借以说明该领域发展趋势。     

压剪加载下炸药装药中剪切带形成与发展模型

研究了在压剪加载下炸药这类粘塑性介质中剪切带的形成与发展。提出了一种反映炸药装药中剪切带形成和发展的计算方法,并分析了剪切带发展变化特性与炸药起爆的关系     

Optimal (τ, T) opportunistic maintenance of a k‐out‐of‐n:G system with imperfect PM and partial failure

The opportunistic maintenance of a k‐out‐of‐n:G system with imperfect preventive maintenance (PM) is studied in this paper, where partial failure is allowed. In many applications, the optimal maintenance actions for one component often depend on the states of the other components and system reliability requirements. Two new (τ, T) opportunistic maintenance models with the consideration of reliability requirements are proposed. In these two models, only minimal repairs are performed on failed components before time τ and the corrective maintenance (CM) of all failed components are combined with PM of all functioning but deteriorated components after τ; if the system survives to time T without perfect maintenance, it will be subject to PM at time T. Considering maintenance time, asymptotic system cost rate and availability are derived. The results obtained generalize and unify some previous research in this area. Application to aircraft engine maintenance is presented. © 2000 John Wiley & Sons;, Inc. Naval Research Logistics 47: 223–239, 2000     

仿真计算机和仿真软件发展

介绍仿真机和仿真软件的发展,分析了银河仿真机系统性能,探讨了仿真机的未来发展特征。     

基于遗传算法的观察所优化配置

文章研究了三维地形中的观察所优化配置问题,结合观察所实际情况,给出了利用遗传算法进行观察所优化的计算方法,并编制了计算机应用程序.计算机模拟实验表明,文中采用的算法能综合考虑多种因素,所得结果合理、准确,并且具有较高的效率.     

火炮动态后坐装置有限元分析与优化

活塞缸是火炮动态后坐装置中的关键部件,其结构强度设计是整个实验装置强度设计的核心。利用I-DEAS软件,在对其进行实体建模和有限元网格划分的基础上,计算了活塞缸整体的应力应变值,得到了活塞缸工作时的应力应变图,并对其结构中应力状况恶劣的部位进行了结构优化。     

子母式穿甲弹子弹发射过程研究

对子母式穿甲弹子弹的发射过程进行详细的分析,得出了子弹长度与子弹飞离母弹速度的关系、子弹长度与火药燃烧率的关系、子弹长度与母弹弹头部发射孔内最大压力的关系以及子弹的长度与子弹发射所需时间的关系,为子母式穿甲弹设计提供了依据。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Field test and probabilistic analysis of irregular steel debris casualty risks from a person-borne improvised explosive device

Person-borne improvised explosive devices (PBIEDs) are often used in terrorist attacks in Western countries. This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard. An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour, including positions, velocity, and trajectory angles. These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis. In the probabilistic analyses a probability of fatality or serious injury was computed. Based on the results presented, many practical conclusions can be drawn, for instance, regarding safe evacuation distances if a person were exposed to a suspected PBIED.