Reforming the bras tendus? The Congolese National Police reforms, 2003–2016

The security sector reform (SSR) programme in the Democratic Republic of the Congo (DRC) has failed, according to a former high-level member of the United Nations (UN) mission in the DRC, as a large section of the country remains outside government control, and the security institutions of the state continue to constitute one of the predominant sources of insecurity for the local population in a number of ways. Based on several field studies, this article critically scrutinises the SSR of the Congolese National Police (Police nationale congolaise; PNC) and the efforts to reform it between 2004 and 2016. It further attempts to explain why so little progress was made in the SSR of the PNC, despite extensive involvement from donors. The article shows that the instrumental and traditional approach to SSR is partly to blame, because in this case it failed to address the root problems and initiate the needed fundamental reform and reconstruction of the police force. It also shows that reforming local security institutions becomes even more difficult when the local authorities do not support the effort.     

The subversion of the Bulgarian defence system – the Russian way

Russia has long been pursuing an intended and calculated policy of keeping enough influence in Bulgaria in order to have control over national decisions. Together with the economic, energy, political and information tools used by Russia in its hybrid war against Bulgaria and in its bid to achieve an enduring “state capture,” defence is also a distinct target of Russian subversion now. A list of noticeable subversive actions with tangible effects can be summarised, ranging from fuelling division and manipulating public opinion, preventing the strengthening of the NATO position in the Black Sea, sabotaging defence reform to various options of subverting the modernisation of the Bulgarian Armed Forces and seeking new ways to keep legacy Soviet military equipment in operation as long as possible. This issue must be urgently addressed both nationally and in NATO.     

海用跟踪雷达轴线角速度测量

讨论了一种伺服设计方案的雷达轴线角速度的测量方法。给出了三个不同的测量点,并说明在稳态条件下,从这三个点测量到的结果都可当作目标视线角速度,且误差不大。最后还给出了测量值的暂态计算机模拟结果。     

基于计算机三维建模技术的两栖车辆静水性能计算

为了解决传统静水性能计算中倾斜浮态下浮心计算困难的问题,建立了两栖车辆的三维实体模型,研究了任意浮态下浮心的计算方法。在此基础上,求解了两栖车辆在静水平衡时的浮态,并利用SolidWorks提供的API函数进行二次开发,实现了计算的自动化。经实例验证表明,该算法准确、快速。     

基于Solidworks二次开发的两栖车辆浮态设计及静稳性分析

建立了描述车辆姿态向量和重力向量的两个坐标系,研究了姿态向量与坐标变换之间的关系,根据Solid-Works提供的函数,利用二分法求解了给定姿态下的浮心位置;以浮心计算为基础,通过对车辆的受力分析和运动分析,确定了车辆浮态的计算方法;利用SolidWorks的API函数进行二次开发,形成了计算静稳性的程序,并进行了实例计算。结果表明：与传统的作图法相比较,该方法计算结果更精确,计算速度更快。     

高维非线性电路平衡点稳定性研究

提出了一种新的分析具有分解形式的高维非线性电路平衡点全局渐近稳定的方法.这种方法以矩阵分解为工具,结合平衡点的渐近稳定判据,用分解矩阵的稳定性决定平衡点的全局渐近稳定性.与目前该问题所采用的LIYAPUNOV直接法相比,该方法具有无须判断平衡点的唯一性,判别方法直接明了等优点.电路维数越大时,此方法越有其优势.同时,该方法对于其他形式的非线性系统的分析,也有重要的启发性及应用价值.     

氧化锆陶瓷Ⅱ-Ⅲ复合型裂纹的综合相变增韧作用

采用综合相变准则和应变能释放率判据对氧化锆陶瓷Ⅱ-Ⅲ复合型裂纹的增韧结果进行了理论计算。分别给出了静止裂纹和定常扩展裂纹相变增韧的理论表达式。结果表明:综合相变对静止裂纹有微小的负屏蔽效应,对扩展裂纹的增初结果与材料的剪切模量、相变尾区高度和相变体积分数成正比,并且增韧值随着K_Ⅲ/K_Ⅱ比值的增大而减小,表明相变对Ⅱ型裂纹的增韧效果相对Ⅲ型裂纹更显著。     

状态空间表达下控制系统的稳态误差

经典控制理论对系统稳态误差的讨论从传递函数入手,重点是对系统开环传递函数的研究,当系统的输入是任意函数时,引入动态误差系数方法来研究稳态误差,但是当输入具有高阶导数时,动态误差系数将很难得到.现代控制理论中的状态空间表达下求系统的稳态误差很好地解决了这个问题.利用矩阵之间的运算来表示动态误差系数,并且可以得到任意输入下的稳态误差值,在线性定常系统下的推导结果还可以适用于线性时变系统,具有一定的普遍性.     

Lipschitz非线性系统状态观测器设计新方法

针对Lipschitz非线性系统状态观测器,提出了一种以极小化条件数为目标准则的新的设计方法。运用梯度下降法和Slyvester方程,计算极小化条件数,优化增益矩阵和最大允许Lipschitz常数,完成观测器设计。通过同其它文献的算例比较,结果发现按文中方法设计的观测器具有迭代次数少、优化结果好的特点。     

线性系统的降维状态观测器参数化设计方法

在线性系统可观测的情况下,研究了降维状态观测器设计问题。通过非奇异线性变换,得到代数等价系统的同时分离出需观测的部分状态。基于Sylvester矩阵方程的参数化解,给出降维观测器的增益矩阵的参数化表达形式,从而给出了线性系统的降维状态观测器设计的一种参数化方法。数值算例表明：所提降维状态观测器的参数化设计方法是简单有效的。