基于扩展卡尔曼滤波的雷达无源定位方法

提出了基于扩展卡尔曼滤波的雷达无源定位技术。利用多无人机平台对雷达网进行航迹欺骗,需要对网内的雷达进行定位以达到精确欺骗干扰的目的。但飞行器在飞行过程量测噪声较高,传统的时差定位方法无法满足定位精度的要求。对于时差定位的非线性时变模型,提出了利用时变扩展卡尔曼滤波对雷达位置进行跟踪定位的方法。仿真结果显示,利用扩展卡尔滤波进行无源定位可以在高噪声背景下有较好的定位精度。     

Statistical Analysis as an Adjunct to Historical Research: Identification of the Likely Manufacturers of British Pattern 1907 Bayonets Supplied by the Birmingham Small Arms Company to the Siamese Government in 1920

In 1920, the Birmingham Small Arms Company supplied 10,000 Pattern 1907 bayonets to the government of Siam to accompany an order for rifles. The original maker of these bayonets was unknown, but historical research indicates that the Wilkinson Sword Co. Ltd. was a primary maker. The weights of some surviving Pattern 1907 bayonets, including twelve bayonets from the 10,000 described above, produced by the six makers in the UK before and during the Great War (1914–1918) period were available. A statistical analysis of the data was performed to compare with the historical research. The results strongly supported that the Wilkinson Sword Co. Ltd. was a primary maker. They were also sufficient to exclude from this batch of twelve bayonets the Royal Small Arms Factory (Enfield) and Vickers Ltd. as manufacturers. The statistical evidence for the presence of bayonets made by J.A. Chapman Ltd., R. Mole & Sons and Sanderson Bros. was weaker than that for the Wilkinson Sword Co. Ltd., but was nevertheless supportive of that hypothesis. Overall, the analysis was consistent with the supply to Siam of commingled bayonets from British government stores. It was noted that the bayonets for the Siam contract fell into a relatively narrow weight range, but the reason for this could not be determined.     

状态X~2检验法在联邦滤波器中的应用

针对联邦滤波器的特殊性,基于残差故障统计检验原理,详细研究了状态检验法应用时存在的几个问题。由于信息分配,造成子滤波器局部估计次优,从而基于残差的故障统计检验方法不能够直接使用;针对这一问题,修正了残差方差阵的计算方法,并提出一种次优自适应补偿方法,能够有效改善局部估计次优性对故障检测灵敏度的影响。最后的仿真结果表明了研究的有效性和可行性。     

针对窄脉冲雷达测角的相位干涉仪仿真研究

以Matlab／simulink为工具,对相位干涉仪快速准确获取窄脉冲目标雷达的角信息问题进行了仿真研究。研究表明,相位干涉仪快速、准确获取窄脉冲目标雷达角信息的基本能力主要取决于鉴相器中低通滤波器截止频率的设计,并给出了截止频率的设计公式。此外,还对读取相关信息的时机和方法等问题进行了研究,给出了相应的解决方案。     

Quality control chart design under Jidoka

We consider design of control charts in the presence of machine stoppages that are exogenously imposed (as under jidoka practices). Each stoppage creates an opportunity for inspection/repair at reduced cost. We first model a single machine facing opportunities arriving according to a Poisson process, develop the expressions for its operating characteristics and construct the optimization problem for economic design of a control chart. We, then, consider the multiple machine setting where individual machine stoppages may create inspection/repair opportunities for other machines. We develop exact expressions for the cases when all machines are either opportunity‐takers or not. On the basis of an approximation for the all‐taker case, we then propose an approximate model for the mixed case. In a numerical study, we examine the opportunity taking behavior of machines in both single and multiple machine settings and the impact of such practices on the design of an X – Q C chart. Our findings indicate that incorporating inspection/repair opportunities into QC chart design may provide considerable cost savings. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

基于扩展卡尔曼滤波的机动目标航迹跟踪

针对高速飞行目标航迹跟踪问题,进行了扩展卡尔曼滤波的曲线拟和仿真试验研究.首先建立目标跟踪的数学模型,确定了系统对应的参数及状态方程,进而将线性卡尔曼滤波器进行扩展,将函数形式的滤波模型在函数自变量估计值附近进行泰勒级数展开,求导获得相应雅克比矩阵,在获得观测及系统误差的基础上,得到针对此问题的扩展卡尔曼滤波方程.仿真结果表明该方法的有效性.     

联邦滤波器的SINS/GNS/DVS水下组合导航

针对现有的水下导航系统不能全面满足AUV导航的需要,为了提高水下航行器组合导航系统长时间远航程的隐蔽性,可靠性及精度,提出了一种基于联邦滤波器的惯性导航系统、地磁导航、多普勒速度声纳的组合导航方案,并采用简化自适应卡尔曼算法对水下航行器组合导航系统进行误差估计,解决了传统卡尔曼滤波容易发散的问题.仿真结果表明,在SINS/GNS/DVS组合导航中采用该算法,提高了定位精度,保证了滤波的快速性,验证了该算法的可行性和正确性.     

多操纵面战斗机动态控制分配策略研究(英文)

现代先进飞机配置多个操纵面且又冗余,这有利于实现非常规飞行,提高飞机敏捷性,使飞机在机动和故障时有更多的选择,但是同时也导致了飞机控制设计复杂度的增加.为了达到更好的效果,就必须利用控制分配器来充分利用多操纵面的不同带宽.从频率域角度出发,研究了动态控制分配方法,并将其应用于某型先进战斗机的控制分配器设计中,利用鸭翼的频率特性抵消府舱过载,经仿真验证,采用动态控制分配策略时,可以有效地减小座舱过载,同时还可以减小配平阻力,取得了良好的控制效果.     

末制导段比例导引法的改进

为了消除比例导引法末制导段的各种干扰因素,抑制法向过载的跳动,基于广义卡尔曼滤波多步估计理论,提出了将拦截导弹直接向瞬时遭遇点导引的末制导导引方法,并进行了计算机仿真.仿真结果表明,该方法可以明显消除或减小末制导段比例导引律的各种干扰因素,抑制法向过载的跳动,改善末制导的弹道特性,减小脱靶量,缩短拦截时间.     

自适应采样数粒子滤波算法

基于统计决策规则提出自适应采样数粒子滤波算法,在定义综合性能风险函数的基础上,推导出粒子数与滤波误差方差之间的关系式,使得在跟踪过程中,可以根据目标的机动情况在线调节粒子数,以使跟踪性能达到最优。在Matlab仿真平台下进行了闪烁噪声下的机动目标跟踪实验,结果表明,自适应采样数粒子滤波算法是一种有效的机动目标跟踪方法,跟踪性能较基本粒子滤波算法提高了3.7倍。