铜包钢绞合导体与铜钢混绞导体的耐蚀性比较

通过电化学腐蚀原理的分析,认为被复线用铜包钢绞合导体是用铜钢混绞导体耐蚀性的3倍,有效提高了被复线的野外使用性能.与装备电缆通用的钢丝、铜丝混绞或混编导体或屏蔽层相比,铜包钢丝还兼有更好的耐蚀性、导电性、导磁性和力学性能,是一类优良的电磁屏蔽用导体材料,为装备线缆的设计采用和性能提高提供了防腐依据.     

Models and algorithms for shuffling problems in steel plants

In this article, we study item shuffling (IS) problems arising in the logistics system of steel production. An IS problem here is to optimize shuffling operations needed in retrieving a sequence of steel items from a warehouse served by a crane. There are two types of such problems, plate shuffling problems (PSP) and coil shuffling problems (CSP), considering the item shapes. The PSP is modeled as a container storage location assignment problem. For CSP, a novel linear integer programming model is formulated considering the practical stacking and shuffling features. Several valid inequalities are constructed to accelerate the solving of the models. Some properties of optimal solutions of PSP and CSP are also derived. Because of the strong NP‐hardness of the problems, we consider some special cases of them and propose polynomial time algorithms to obtain optimal solutions for these cases. A greedy heuristic is proposed to solve the general problems and its worst‐case performances on both PSP and CSP are analyzed. A tabu search (TS) method with a tabu list of variable length is proposed to further improve the heuristic solutions. Without considering the crane traveling distance, we then construct a rolling variable horizon heuristic for the problems. Numerical experiments show that the proposed heuristic algorithms and the TS method are effective. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

A three-stage model for the perforation of finite metallic plates by long rods at high velocities

A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages: (1) initial penetration; (2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.     

基于改进的投影法的目标标识定位算法研究

军事对抗中,需要准确识别目标标识,以车辆识别中车牌精确定位为例进行研究。通过结合利用跳变法和投影法,提出一种基于改进的投影法的车牌定位。由进行车牌水平定位的跳变法和进行车牌垂直定位的投影法两个步骤组成。其中,像素在车牌水平方向的区域内会产生明显跳变,先通过跳变法确定车牌的水平区域。由于车牌一般位于图像的下半部分,所以从图像的1/2高度到4/5高度,1/3宽度到4/5宽度处扫描,减少背景区干扰。然后在车牌的水平区域再进行垂直投影,得到车牌的准确位置。实验结果证明,该方法不仅可以有效提高定位速度,还能够由于减少背景区的干扰而提高定位准确度。     

球形头部弹丸侵彻运动靶板的数值模拟

为研究球形头部弹丸高速侵彻运动靶板的侵彻规律,运用LS-DYNA动力分析软件仿真研究了不同条件下球形头部弹丸对靶板的正侵彻效应,获得了运动靶板厚度、材料和弹丸着速3种参数对侵彻过程中弹丸弹道偏移、翻转角度和剩余速度的响应规律。结果表明,随着着速的提高,弹丸翻转幅度和弹道偏移量逐渐减小;随着靶板厚度的增加,弹丸正向翻转角度和轴向剩余速度显著减小,而弹道偏移量增大;3种材料运动靶板中,4340钢靶对弹丸弹道偏移、翻转角度和剩余速度的影响最大,Weldox460钢次之,LY12铝最小。     

The deformation and failure mechanism of cylindrical shell and square plate with pre-formed holes under blast loading

The deformation and failure mechanism of cylindrical shells and square plate with pre-formed holes under blast loading were investigated numerically by employing the Ansys 17.0 and Ls-Dyna 971. To calibrate the numerical model, the experiments of square plates with pre-formed circle holes were modeled and the numerical results have a good agreement with the experiment data. The calibrated numerical model was used to study the deformation and failure mechanism of cylindrical shells with pre-formed circle holes subjected to blast loading. The structure response and stress field changing process has been divided into four specific stages and the deformation mechanism has been discussed systematically. The local and global deformation curves, degree of damage, change of stress status and failure modes of cylindrical shell and square plate with pre-formed circular holes are obtained, compared and analyzed, it can be concluded as: (1) The transition of tensile stress fields is due to the geometrical characteristic of pre-formed holes and cylindrical shell with arch configuration; (2) The existence of pre-formed holes not only lead to the increasing of stress concentration around the holes, but also release the stress concentration during whole response process; (3) There are three and two kinds of failure modes for square plate and cylindrical shell with pre-formed holes, respectively. and the standoff distance has a key influence on the forming location of the crack initiating point and the locus of crack propagation; (4) The square plate with pre-formed holes has a better performance than cylindrical shell on blast-resistant capability at a smaller standoff distance, while the influence of pre-formed holes on the reduction of blast-resistant capability of square plate is bigger than that of cylindrical shell.     

低合金船体钢点蚀敏感性的研究

通过极化试验比较了4种含有不同合金元素的低合金钢的点蚀诱发敏感性,并用电子探针对钢中的主要夹杂物及点蚀诱发后的腐蚀形态作了鉴定.结果表明:镍-铬系钢比锰系钢具有更好的耐点蚀性能;点蚀总是从夹杂物与周围钢基体毗邻的界面处开始诱发;含有硫化物的复相夹杂对点蚀的敏感性更强.     

紧固件用钢复验的动态抽验方案

本文针对现行紧固件原材料进厂抽样复验方法的不足,套改《ISO2859计数抽查程序和图表》,提出动态抽样方案,并对新旧方案实际应用进行了比较。以比较科学的决策,取得提高效益、降低消耗的结果.     

火场中的金属变形及其在火灾勘查中的证明作用

火场当中,钢质材料的存在形式很多,常见的有五种特殊存在形式竖直承重、竖直不承重、竖直悬挂、水平悬空和水平放置.研究钢质材料这五种存在形式在火场当中的变形,有助于对起火点的认定和火灾发展蔓延方向的分析.     

均匀设计法在建立PELE爆裂效应关系模型中的应用

为了研究钢壳体PELE爆裂效应与影响因素之间的数学关系,对钢壳体PELE侵彻钢板进行了数值仿真和试验。采用均匀设计法设计仿真工况,将仿真结果进行回归分析,得出爆裂效应与影响因素之间的数学关系式,实弹侵彻实验结果与仿真结果基本吻合。研究表明,影响因素均与壳体爆裂长度成非线性关系,增大靶板厚度、弹芯长度和着速或减小壳体厚度均有利于提高钢壳体的爆裂效应。相关结论为PELE的工程设计和应用提供了理论基础。