焊接钢质药筒与引伸药筒内弹道设计一致性研究

装备内弹道的一致性对其性能影响较大。经过长期对多个弹种用药筒的设计、使用和考核,发现用药筒在膛内容积一致性来进行弹道一致性设计比较适用和相对准确,同时发现挤进压力为P_0时的真实容积对内弹道一致性影响较大。此外焊接钢质药筒的内弹道一致性不仅达到了引伸药筒的要求,而且在或然误差和内弹道稳定性方面优于引伸药筒。     

复铜与铜导线的高频电磁性能比较

本文用有限元法计算复铜导线和铜导线内部的电磁场分布,比较两种导线的电磁场及其传输参数,最后得出结论——在高频电路中复铜导线可以取代铜导线.     

局部火灾场钢框架结构等效楼面活荷载分析

通过对火灾场钢结构框架梁极限抗弯、抗剪承载力的分析,提出采用等效楼面活荷载来描述火灾场对结构极限承载力的削弱,建立了火灾场等效楼面活荷载的计算公式,通过具体算例分析了厚涂型不同保护层厚度的框架钢梁极限抗弯、抗剪承载力及等效楼面活荷载的变化规律。分析结果表明,采用等效楼面活荷载可以直观地描述火灾场对结构构件极限承载能力的削弱,使火灾场钢结构受力分析变得简单、清晰。     

火场中A3钢的晶粒度与燃烧时间和温度关系的研究

本文模拟典型火灾温度－时间曲线,对热轧成的Ａ３钢进行受热处理,测定在不同燃烧时间和温度下Ａ３钢的晶粒度,给出了Ａ３钢的晶粒度与燃烧时问和温度之间的定量关系,提出了通过测定Ａ３钢晶粒度的大小来鉴定火场中不同部位的燃烧时间和温度的科学方法     

长杆射弹对钢纤维混凝土靶开坑特性的实验研究

为考察射弹对钢纤维混凝土靶的侵彻特性,采用57mm轻气炮,进行了小尺寸模拟射弹对钢纤维混凝土靶(钢纤维的体积分数为2%)的侵彻实验。实验中观察了钢纤维混凝土靶的开坑形状,测量了射弹的击靶速度,并且采用注沙法测出靶体的开坑体积,计算出射弹对靶体的侵彻体积,得到了长杆射弹的动能与侵彻体积的关系。引入射弹单位面积的冲击动能和靶体单位侵彻体积的冲击动能,结合钢纤维混凝土靶的实验数据,考察了两者之间的关系。     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal

The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study consist of the brazing current, electrode pressure and brazing time. The Taguchi method was applied to the design of experiments. Signal-to-Noise ratio was introduced in the study to identify optimal levels from the process where input parameters yield increased shear strength. Brazing was thus implemented with 5,000A brazing current, 0.70 MPa electrode pressure, and 1.50s brazing time. The maximum shear strength obtained was 54.31 N·mm⁻² in accordance with input parameter settings. In addition, Cu-rich phase and Ag_0.4Fe_0.6 intermetallic phases were found at the interface zone.     

新型防火板材包覆保护钢结构方法探讨

新型防火板材是钢结构防火技术新的发展方向,结合钢结构防火保护技术的发展与现状,对GF防火板（1100℃级轻质无石棉硅酸钙防火板）、高温耐火胶粘剂以及用GF防火板保护钢结构的方法进行了深入的研究,并与目前大量使用的钢结构防火涂料作对比,探讨了新型防火板材在技术性能和工程施工方面的优势。     

钢结构防火材料应用问题及对策探讨

介绍了钢结构防火涂料的分类及特性,分析了钢结构建筑在火灾中的特点,探讨了钢结构防火涂料在技术和应用方面存在的问题,提出了钢结构建筑防火涂料施工时应注意的事项等对策。     

917低磁钢与铝合金爆炸焊接复合实验研究

采用异种金属爆炸焊接复合技术 ,研制了 91 7低磁钢与LF5、LF2 1、LF1 1等铝合金的爆炸焊接复合板 ,并对该铝—钢复合板力学性能进行了实验研究 ,对复合界面进行了金相分析 .实验结果表明 ,该铝—钢复合板复合界面物理结合良好 ,其抗剪和抗弯强度满足实船使用要求