弧连通空间与收敛类

本文利用收敛类的理论刻划弧连空间,并得到:集合X上具有F性质的子集簇(?)确定了X的一个收敛类(?),则(?)诱导出的拓扑空间(X,(?)-(?))是弧连通的;反之,每一个弧连空间(X,(?)都可以由集合X的一个收敛类诱导出来。     

C~3I决策系统的Petri网建模技术

综述了Ｃ３Ｉ决策系统的若干Ｐｅｔｒｉ网建模方法。首先介绍了Ｃ３Ｉ系统的一般Ｐｅｔｒｉ网建模技术和时间Ｐｅｔｒｉ网建模技术,并介绍了随机Ｐｅｔｒｉ网建模技术;然后介绍了谓词Ｐｅｔｒｉ网和有色Ｐｅｔｒｉ网建模技术。最后指出了Ｃ３Ｉ决策系统中,Ｐｅｔｒｉ网的若干研究方向。     

Petri网在C3I系统建模分析和综合中的应用

近十多年来,Ｐｅｔｒｉ网理论被广泛应用于Ｃ３Ｉ系统的建模分析和综合设计中,并取得了很多成果。本文就这一领域的研究理论进行综述,并对将来的可能发展方向作一展望     

基于输出协方差配置的车辆振动控制系统设计

通过对车辆振动系统的振动特性分析,确定出系统反馈控制的设计目标。基于对［１］中状态协方差配置控制理论的推广,文中给出了控制器设计的具体方法,并举例说明该设计方法具有直接有效的特点     

应用柯洛波夫数论网格计算发射n发至少命中m发概率的研究

本文应用了柯洛波夫数论网格方法,较好地解决了三级误差条件下高精度计算命中概率指标 P_(Lm)的问题。本文还详细给出了计算 P_(Lm)的方法、步骤和实例。     

Integrating decisions with advance supply information in an assemble-to-order system

We study a periodic-review assemble-to-order (ATO) system with multiple components and multiple products, in which the inventory replenishment for each component follows an independent base-stock policy and stochastic product demands are satisfied according to a First-Come-First-Served rule. We assume that the replenishment for various component suffers from lead time uncertainty. However, the decision maker has the so-called advance supply information (ASI) associated with the lead times and thus can take advantage of the information for system optimization. We propose a multistage stochastic integer program that incorporates ASI to address the joint optimization of inventory replenishment and component allocation. The optimal base-stock policy for the inventory replenishment is determined using the sample average approximation algorithm. Also, we provide a modified order-based component allocation (MOBCA) heuristic for the component allocation. We additionally consider a special case of the variable lead times where the resulting two-stage stochastic programming model can be characterized as a single-scenario case of the proposed multistage model. We carry out extensive computational studies to quantify the benefits of integrating ASI into joint optimization and to explore the possibility of employing the two-stage model as a relatively efficient approximation scheme for the multistage model.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.     

适用于北斗混合星座的相对定位随机模型建模策略

为提高模糊度解算成功率和基线解精度,提出适用于北斗的相对定位随机模型建模策略,即混合随机建模策略。采用最小二乘方差分量估计方法对北斗单差观测量方差进行估计。对处于不同高度的三轨道卫星观测量方差分别建模:对地球静止轨道卫星观测量方差采用载噪比模型建模,对倾斜地球同步轨道卫星和中地球轨道卫星观测量方差均采用仰角模型建模。根据不同模型实时组建观测量的随机模型。试验结果表明:相比于采用传统简化模型和单一的仰角或载噪比模型,混合随机模型能更加真实地反映不同卫星观测量的随机噪声特性,模糊度解算成功率和相对定位精度均有提高,总体性能最优,因而能更好地适用于北斗系统。     

Client‐contractor bargaining on net present value in project scheduling with limited resources

The client‐contractor bargaining problem addressed here is in the context of a multi‐mode resource constrained project scheduling problem with discounted cash flows, which is formulated as a progress payments model. In this model, the contractor receives payments from the client at predetermined regular time intervals. The last payment is paid at the first predetermined payment point right after project completion. The second payment model considered in this paper is the one with payments at activity completions. The project is represented on an Activity‐on‐Node (AON) project network. Activity durations are assumed to be deterministic. The project duration is bounded from above by a deadline imposed by the client, which constitutes a hard constraint. The bargaining objective is to maximize the bargaining objective function comprised of the objectives of both the client and the contractor. The bargaining objective function is expected to reflect the two‐party nature of the problem environment and seeks a compromise between the client and the contractor. The bargaining power concept is introduced into the problem by the bargaining power weights used in the bargaining objective function. Simulated annealing algorithm and genetic algorithm approaches are proposed as solution procedures. The proposed solution methods are tested with respect to solution quality and solution times. Sensitivity analyses are conducted among different parameters used in the model, namely the profit margin, the discount rate, and the bargaining power weights. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009