空间碎片碰撞风险评估模型及其应用

以现有的空间碎片环境模型为基础,建立了一套空间碎片风险评估模型。该模型包括空间碎片环境、航天器有限元建模、几何遮挡处理以及碰撞概率计算四个模块。为了验证风险评估模型的精度及有效性,针对机构间空间碎片协调委员会指定的三种标准工况,将该计算结果与国内外已有的风险评估模型的计算结果进行比较,验证了风险评估模型的正确性。利用开发的风险评估模型,对立方体航天器遭遇空间碎片碰撞风险进行仿真评估与分析,给出了轨道高度、倾角以及航天器自身的姿态参数对航天器遭遇空间碎片碰撞风险的影响特性。     

基于分形几何的信号特征提取技术及其应用研究

针对分形客观展现事物原貌的特点 ,从工程应用的角度分别对信号的分形性验证、有效分析区间的确定、分形性描述和刻画、设备状态的趋势分析等方面作了探讨 ,形成了基于分形几何的信号特征提取技术 ,并描绘出基于分形几何的设备故障诊断模式     

平面内一组线段相对于线光源的可见性

给定平面内一组互不相交的线段 ,将实际光源抽象成有限长度线光源 ,讨论其可见性 ,发现线光源的照射效果等价于线光源两端点的照射效果叠加 ,给出了寻找所有可见边的算法 ,推广了文 [1 ]的结论。     

Modeling and analysis of vessel casualties resulting from tanker traffic through narrow waterways

In this paper, we present a physics-based stochastic model to investigate vessel casualties resulting from tanker traffic through a narrow waterway. A state-space model is developed to represent the waterway and the location of vessels at a given time. We first determine the distribution of surface current at a given location of the waterway depending on channel geometry, bottom topography, boundary conditions, and the distribution of wind. Then we determine the distribution of the angular drift for a given vessel travelling at a given location of a waterway. Finally, we incorporate the drift probabilities and random arrival of vessels into a Markov chain model. By analyzing the time-dependent and the steady-state probabilities of the Markov chain, we obtain risk measures such as the probability of casualty at a given location and also the expected number of casualties for a given number of vessels arriving per unit time. Analysis of the Markovian model also yields an analytical result that shows that the expected number of casualties is proportional to square of the tanker arrival rate. We present our methodology on an experimental model of a hypothetical narrow waterway. © 1999 John Wiley & Sons, Inc. Naval Reseach Logistics 46: 871–892, 1999     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

Distribution free bounds for service constrained (Q,r) inventory systems

A classical and important problem in stochastic inventory theory is to determine the order quantity (Q) and the reorder level (r) to minimize inventory holding and backorder costs subject to a service constraint that the fill rate, i.e., the fraction of demand satisfied by inventory in stock, is at least equal to a desired value. This problem is often hard to solve because the fill rate constraint is not convex in (Q, r) unless additional assumptions are made about the distribution of demand during the lead‐time. As a consequence, there are no known algorithms, other than exhaustive search, that are available for solving this problem in its full generality. Our paper derives the first known bounds to the fill‐rate constrained (Q, r) inventory problem. We derive upper and lower bounds for the optimal values of the order quantity and the reorder level for this problem that are independent of the distribution of demand during the lead time and its variance. We show that the classical economic order quantity is a lower bound on the optimal ordering quantity. We present an efficient solution procedure that exploits these bounds and has a guaranteed bound on the error. When the Lagrangian of the fill rate constraint is convex or when the fill rate constraint does not exist, our bounds can be used to enhance the efficiency of existing algorithms. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 635–656, 2000     

Optimal nonmyopic gambling strategy for the generalized Kelly criterion

We consider the optimal wagers to be made by a gambler who starts with a given initial wealth. The gambler faces a sequence of two-outcome games, i.e., “win” vs. “lose,” and wishes to maximize the expected value of his terminal utility. It has been shown by Kelly, Bellman, and others that if the terminal utility is of the form log x, where x is the terminal wealth, then the optimal policy is myopic, i.e., the optimal wager is always to bet a constant fraction of the wealth provided that the probability of winning exceeds the probability of losing. In this paper we provide a critique of the simple logarithmic assumption for the utility of terminal wealth and solve the problem with a more general utility function. We show that in the general case, the optimal policy is not myopic, and we provide analytic expressions for optimal wager decisions in terms of the problem parameters. We also provide conditions under which the optimal policy reduces to the simple myopic case. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 639–654, 1997     

现役船体结构可靠性评估理论研究现状及展望

作为现役船体结构可靠性评估的关键技术,可靠性评估理论直接决定了可靠性评估结果的有效性和置信度。从可靠性评估理论的计算原理、度量指标计算及工程应用等方面阐述了传统可靠性评估理论和非概率可靠性评估理论的发展历程及研究现状,分析、总结了各可靠性评估理论在现役船体结构可靠性中的优势及不足,给出了今后开展相关研究的展望,并指出了现役船体结构可靠性研究的重点。     

几何约束的改进弹性体网格变形方法研究及应用

针对现有弹性体网格变形方法无法有效抑制网格单元出现"负体积"和过度畸变等问题,引入体积弹性模量约束和挤压弹性模量约束,提出一种基于几何约束的改进弹性体法。借助Patrick网格质量参数,选取三维长方体边界在旋转、平移和伸展变形三种方式下的大幅度运动,对比研究引入几何约束后的改进效果。仿真计算二维NACA0012翼型的俯仰振荡和三维伸缩翼变形过程的气动特性,结果表明:基于几何约束的改进弹性体法显著提高了变形网格的鲁棒性,尤其在大变形时能够有效约束较差网格单元,改善经典方法存在的问题,可为非定常流场问题的求解提供有力支撑。     

Inventory policies for a make‐to‐order system with a perishable component and fixed ordering cost

We consider a make‐to‐order production system where two major components, one nonperishable (referred to as part 1) and one perishable (part 2), are needed to fulfill a customer order. In each period, replenishment decisions for both parts need to be made jointly before demand is realized and a fixed ordering cost is incurred for the nonperishable part. We show that a simple (s_n,S,S) policy is optimal. Under this policy, S along with the number of backorders at the beginning of a period if any and the availability of the nonperishable part (part 1) determines the optimal order quantity of the perishable part (part 2), while (s_n,S) guide when and how much of part 1 to order at each state. Numerical study demonstrates that the benefits of using the joint replenishment policy can be substantial, especially when the unit costs are high and/or the profit margin is low. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009