一种多功能微型计算机接口

文中给出一种多功能微型计算机接口,可应用于微机控制、信号测试,电路自检、故障诊断及数字信号产生等技术领域,是一种功能较强的调试、控制和测试手段,具有一定的实用价值。     

载荷识别及其精度改善

本文系统地建立了载荷识别方法,详细探讨了提高载荷识别精度的途径,得到了载荷识别过程中信号处理加窗原则和试验的一般技术要求,使识别精度明显提高。     

利用线阵CCD自动测量MSBS中悬浮模型的位置与姿态

以我国自行研制的磁悬挂天平系统为背景,主要研究了利用线阵CCD传感器构建MSBS的模型位置与姿态测量系统以及相应的传感器配置方案、信号转换、测量原理和测量流程等问题。该系统的位置与姿态测量系统以两组共5片线阵CCD作为MSBS中悬浮模型的5自由度位置与姿态传感器,以串联的多级惯性环节电路为脉宽-电压转换电路,将测量信号分别输入控制回路和校准测量回路。文中详细介绍了5片CCD传感器的配置方案及其测量原理,然后研究了使用多级惯性环节实现脉宽-电压信号的转换问题,并对该方案进行了理论分析和仿真,最后研究了利用CCD的测量信号反演悬浮模型位置与姿态的数学原理及其自动测量流程。     

The (s,Q) inventory model with Erlang lead time and deterministic demand

We develop a simple, approximately optimal solution to a model with Erlang lead time and deterministic demand. The method is robust to misspecification of the lead time and has good accuracy. We compare our approximate solution to the optimal for the case where we have prior information on the lead‐time distribution, and another where we have no information, except for computer‐generated sample data. It turns out that our solution is as easy as the EOQ's, with an accuracy rate of 99.41% when prior information on the lead‐time distribution is available and 97.54–99.09% when only computer‐generated sample information is available. Apart from supplying the inventory practitioner with an easy heuristic, we gain insights into the efficacy of stochastic lead time models and how these could be used to find the cost and a near‐optimal policy for the general model, where both demand rate and lead time are stochastic. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

坦克分队遭遇战斗火力运用研究

根据遭遇战斗的特点,运用随机格斗、微分对策数理战术模型,研究坦克分队遭遇战斗最优火力运用策略问题.研究得出的结论符合坦克分队战术特点,为坦克分队指挥决策提供辅助作用.     

Appointment scheduling at a multidisciplinary outpatient clinic using stochastic programming

The purpose of this paper is to investigate the problem of constructing an appointment template for scheduling patients at a specific type of multidisciplinary outpatient clinic called an integrated practice unit (IPU). The focus is on developing and solving a stochastic optimization model for a back pain IPU in the face of random arrivals, an uncertain patient mix, and variable service times. The deterministic version of the problem is modeled as a mixed integer program with the objective of minimizing a weighted combination of clinic closing time (duration) and total patient waiting time (length of stay). A two‐stage stochastic program is then derived to account for the randomness and the sequential nature of the decisions. Although it was not possible to solve the two‐stage problem for even a limited number of scenarios, the wait‐and‐see (WS) problem was sufficiently tractable to provide a lower bound on the stochastic solution. The introduction of valid inequalities, limiting indices, and the use of special ordered sets helped to speed up the computations. A greedy heuristic was also developed to obtain solutions much more quickly. Out of practical considerations, it was necessary to develop appointment templates with time slots at fixed intervals, which are not available from the WS solution. The first to be derived was the expected value (EV) template that is used to find the expected value of the EV solution (EEV). This solution provides an upper bound on the objective function value of the two‐stage stochastic program. The average gap between the EEV and WS solutions was 18%. Results from extensive computational testing are presented for the EV template and for our adaptation of three other templates found in the literature. Depending on the relative importance of the two objective function metrics, the results demonstrate the trade‐off that exists between them. For the templates investigated, the “closing time” ranged from an average of 235 to 275 minutes for a 300‐minute session, while the corresponding “total patient time in clinic” ranged from 80 to 71 minutes.     

A decomposition algorithm applied to planning the interdiction of stochastic networks

We describe the application of a decomposition based solution method to a class of network interdiction problems. The problem of maximizing the probability of sufficient disruption of the flow of information or goods in a network whose characteristics are not certain is shown to be solved effectively by applying a scenario decomposition method developed by Riis and Schultz [Comput Optim Appl 24 (2003), 267–287]. Computational results demonstrate the effectiveness of the algorithm and design decisions that result in speed improvements. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

舰载武器系统信号源中同步控制电机快速归零技术

阐述了同步控制电机的零位定义,提出了一种基于相位判别的同步控制电机快速归零方案、单片机控制电路及算法,在舰载武器系统信号源中的应用表明,利用此方案归零同步控制电机速度快、精度高,效果非常理想.     

基于随机虚拟样机的某型自行火炮扭力轴动力仿真

依据随机动力学、多体系统动力学和数理统计理论,借助MSC\Adams仿真软件和MATLAB工具,提出随机虚拟样机的概念。并以某型自行火炮的扭力轴为例,在建立的虚拟样机上,实现不确定性因素下从底盘整体到悬挂系统、再到扭力轴的动力仿真。     

基于阶次跟踪的旋转机械启动过程振动分析

旋转机械运转时其旋转部件产生的振动和噪声所表现出的特征和轴的转速有密切关系。在这类故障的特征分析中,使用阶次跟踪分析法比一般的频域分析更具有优势。对2种典型的阶次跟踪法进行了论述,在此基础上用2个仿真信号对旋转机械启动过程进行了模拟分析,并得到了比较理想的结果。