纳米结构炭材料的储放氢性能研究

主要对多种纳米结构炭材料（超级活性炭、多壁碳纳米管,纳米碳纤堆,纳米石墨纤堆、纳米石墨球等）在常温、10-13MPa的氢气压力下的储放氢量进行了测定（其中包括经过一系列物化处理的样品）,井对其结构和比表面积分别采用SEM、TEM、HRTEM、ASAP2010吸附测试仪（BET）进行了分析．实验结果表明：经过处理的纳米碳样品的储放氢量有所提高,但没有一种样品在温和的实验每件下的储放氢量超过1．0wt％,离DOE目标（6．5wt%）相距甚远。     

退化速率跟踪粒子滤波在剩余使用寿命预测中的应用

毋庸置疑,剩余使用寿命预测对于设备的健康管理越来越重要。近年来粒子滤波方法被越来越多地应用到设备寿命预测技术当中,这是因为粒子滤波方法能更好地解决非线性非高斯系统滤波问题,而且能够获得不确定度信息。但该方法的预测性能却过度依赖于预测模型,并且对于模型参数的初始分布也比较敏感,这在一定程度上限制了粒子滤波预测方法的进一步发展。针对基本粒子滤波预测方法的不足,提出了一种基于退化速率跟踪粒子滤波的通用预测框架,以历史观测数据的退化速率统计规律作为指导来跟踪目标数据的退化速率,实现对粒子滤波预测方法的简化,并将该方法用于轴承和锂离子电池的剩余使用寿命预测,验证了方法的有效性。     

Stage life testing

In progressive censoring, items are removed at certain times during the life test. Commonly, it is assumed that the removed items are used for further testing. In order to take into account information about these additional testing in inferential procedures, we propose a two‐step model of stage life testing with one fixed stage‐change time which incorporates information about both the removed items (further tested under different conditions) and those remaining in the current life test. We show that some marginal distributions in our model correspond either to progressive censoring with a fixed censoring time or to a simple‐step stress model. Furthermore, assuming a cumulative exposure model, we establish exact inferential results for the distribution parameters when the lifetimes are exponentially distributed. An extension to Weibull distributed lifetimes is also discussed.     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

基于镜像的高可用数据对象布局算法

镜像是提高数据可用性的流行方法。借鉴RAID的方法,在算法一级实现数据的冗余分布,提出基于镜像的高可用数据对象布局算法。在数据对象和存储节点失效时,利用冗余数据重构数据对象和存储节点,有效保证存储系统的高可用性。采用马尔可夫激励模型对存储系统进行定量的可用性分析,计算结果表明该方法是有效的。     

多管火箭武器储运发射箱长期储存蠕变性能预测

为探究火箭武器储运发射箱长期储存的蠕变性能,制备复合材料层压板并开展单轴拉伸蠕变试验,获得了单向纤维复合材料主方向的蠕变本构模型参数。采用有限元方法并借助用户自定义材料子程序建立储运发射箱长期储存蠕变的数值分析模型,预测了堆码储存15年后底层发射箱的蠕变变形。以储存后的发射箱作为初始状态建立弹管耦合发射动力学仿真计算模型,进一步分析蠕变对火箭弹发射过程的影响。仿真结果表明:蠕变引起的定向器平行度和发射箱底面平面度的变化均小于技术指标规定值,定向器束的最大残余变形在三维空间内呈马鞍状分布,上、下两行中间位置定向器的变形最大,左、右两列中间位置定向器的变形最小。定向器蠕变变形使得弹管间隙减小,火箭弹在管内运动使弹管之间的动态接触碰撞力增大,离轨速度降低。     

Study on performance degradation and failure analysis of machine gun barrel

An increase in the use of the gun barrel will cause wear of the inner wall, which reduces the muzzle velocity and the spin rate of the projectile. The off-bore flight attitude and trajectory of the projectile also change, affecting the shooting power and the accuracy. Exterior ballistic data of a high-speed spinning projectile are required to study the performance change. Therefore, based on the barrel's accelerated life test, the whole process of projectile shooting is reproduced using numerical simulation technology, and key information on the ballistic performance change at each shooting stage are acquired. Studies have shown that in the later stages of barrel shooting, the accuracy of shooting has not decreased significantly. However, it is found that the angle of attack of the projectile increases as the wear of the barrel increases. The maximum angle of attack reaches 0.106 rad when the number of shots reaches 4300. Meanwhile, elliptical bullet hole has appeared on the target at this shooting stage. Through combining external ballistic theory with simulation results, the primary reason of this phenomenon is found to be a significant decrease in the muzzle spin rate of the projectile. At the end of the barrel life, the projectile muzzle spin rate is 57.5% lower than that of a barrel without wear.     

试论屈原的人生观

屈原的人生观是以立志成名、追求理想、进德修业、乐观向上为主要特征的 ,表现出了胸襟宽阔、锐意进取、昂扬奋发的气概。它能够使人从中获得极大的精神鼓舞和深刻的人生启迪     

储氢电极合金的温度特性研究

针对目前储氢电极合金不适用于电动汽车用大型电池的情况 ,以Ml (NiCoMnTi) 5 合金为例 ,系统研究了温度对储氢电极合金电化学性能的影响。结果表明 :随着温度升高 ,合金的放电容量降低 ,循环稳定性恶化 ,自放电加剧 ;但是在高温下合金的高倍率放电特性得到显著改善。     

陆军战术导弹蓄电池维护与检测方案研究

根据自动化程度高、综合性能强、使用可靠的原则 ,提出了陆军战术导弹蓄电池维护与检测的系统方案 ,采用单片机控制系统实现了多型号蓄电池的自动维护与检测