Fibonacci数列及其算法分析

讨论了方程x^k=x^k-1＋x^k-2＋……＋x＋1的性质根,并利用其给出了k阶Fibonacci数列的通项公式及其性质,最后,给出了该数列的一些算法,并对这些算法做了简要分析。     

等离子体天线辐射特性研究

用环形荧光灯制作了两幅等离子体天线,等离子体激励源分别为220 V交流电压和射频信号.测量了两种等离子体天线的电压驻波比和远区辐射场强,并与周长相同的方框金属天线的特性进行了对比.结果表明,等离子体天线的增益较金属天线平均低5 dB左右;在试验频率低端,220 V电源预激励方式下等离子体天线增益比RF直接激励要高2～4 dB,随着频率增加,两者增益差变小.     

内置式耐压液舱实肋板拓扑优化设计方案分析

通过对内置式耐压液舱中实肋板开孔拓扑优化设计后的强度和稳定性分析发现,对于周向范围为162°的内置式耐压液舱,实肋板在中内龙骨附近开孔较优。实肋板开孔后对于其本身的稳定性影响不大,但MISES应力会有所变化;实肋板开孔后,液舱结构的稳定性会稍微降低,后期在进行液舱结构设计时要考虑是否加强。     

CGCS2000大地问题解算工程运用研究

军事信息系统研制中经常涉及CGCS2000坐标系下的大地问题解算,但直接采用韦森特公式进行软件设计存在一些问题。通过对韦森特公式在工程运用中的问题进行了分析,对正解、反解算法进行了补充完善并给出了相关的计算实例供编程检查。改进后的算法简单实用,适合军事信息系统软件的实现。     

螺旋齿轮齿面接触应力理论计算

应用赫兹理论和齿轮啮合理论给出了螺旋齿轮齿面接触应力的计算方法和相关公式 .算例的计算结果表明螺旋齿轮齿面接触应力明显大于相近参数的圆柱斜齿轮 ,这是此类齿轮用于主传动时普遍出现齿面磨损的一个重要原因 ,因此在设计确定齿轮参数时必须校核接触应力 .     

Fragment spatial distribution of prismatic casing under internal explosive loading

Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control. The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings. In this study, numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted. A new numerical method, which adds the Lagrangian marker points to the Eulerian grid, was proposed to track the multi-material interfaces and material dynamic fractures. Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship. Thereafter, the fragment spatial distributions of the prismatic casing with different fragment sizes, fragment shapes, and casing geometries were obtained using the numerical method. Moreover, fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes, and the experimental data were compared with the numerical results. The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data. Finally, a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.     

Effect of transverse compression on the residual tensile strength of ultrahigh molecular weight polyethylene (Dyneema® SK-76) yarns

Ballistic impact induces complex stress states on fiber-based armor systems. During impact fibers undergo multiaxial loading which includes axial tension, axial compression, transverse compression, and transverse shear. Transverse compression induced by the projectile leads to permanent deformation and fibrillation of fibers resulting in degradation of material tensile strength. Previous work (Sockalingam et al. Textile Res. J 2018) has shown a reduction of 20% in the tensile strength of Dyneema® SK76 single fibers subjected to 77% nominal transverse compressive strains. Experimental investigation of quasi-static transverse compression on Dyneema® SK-76 yarns, unconstrained in the lateral direction, indicate an average of 4% reduction in tensile strength of yarns compressed to 77% nominal strains. In this work we use finite element modeling techniques to understand the difference in residual tensile strength between single fibers and yarns observed in laterally unconstrained transverse compression experiments. Finite element study of the transverse compression response of single fibers and yarns indicate that local strains developed in fibers within the yarn are much lower than the local strains developed in single fibers subjected to a given nominal strain and may explain the less reduction in strength observed in yarns.     

随机-非概率模型下的船体结构屈服强度可靠性分析

针对在役舰船船体载荷、材料属性的随机特性和实船勘验得出的腐蚀损伤下船体抗力区间特性,提出一种基于随机概率理论和区间非概率理论的随机-非概率可靠性分析模型,分别从区间变量随机化和随机变量区间化两个角度给出该模型的可靠性指标求解方法。基于该模型对某舰船船体结构屈服强度进行可靠性分析,结果表明:该模型既体现了结构变量的客观不确定性又减弱了评估结果的盲目保守性,对于既含有随机变量又含有区间变量的在役舰船的可靠性评估具有很强的适用性。     

计算声自导鱼雷直进射击成功概率的解析方法

为解决用仿真方法计算声自导鱼雷直进射击成功概率速度慢且计算的等概率线不光滑等问题,利用数学分析及概率统计的理论,给出了一个计算目标能进入直进射击的声自导鱼雷自导作用扇面概率的近似解析公式,并用仿真方法对这个公式进行了评价,数值实验发现,所得公式能满足一定的精度要求.     

大型柔性起竖臂的有限元建模与分析

针对使用中的振动问题,基于ANSYS软件平台建立某大型柔性起竖臂合理的有限元模型,获得其固有振动特性、刚度和强度等设计数据。分析表明,使用中出现的振动现象是由于外载荷频率接近起竖臂一阶固有频率所致,而起竖臂刚度和强度设计整体合理,但存在局部应力集中和强度设计偏于保守的问题。