Φ2mm丝材电弧喷涂工艺对涂层结合强度的影响

分析了喷砂预处理和电弧喷涂这两个过程的工艺参数对涂层的结合强度的影响。将分数维理论用于喷砂后的试样表面,研究了喷砂角度、分数维和结合强度的相互关系,找到了获得最高结合强度所用的喷砂角度;通过正交试验法,找到了能获得最佳涂层结合强度的Φ2mm丝材电弧喷涂工艺参数。     

三维编织圆管力学性能及火箭级间段模拟结构承载能力研究

对于三维四向（４Ｄ）和五向（５Ｄ）两种编织碳／环氧圆管构件及由其组成的火箭模拟级间段，测试其压缩和扭转力学性能及轴压承载能力。实验表明，５Ｄ材料的压缩性能比４Ｄ材料有较大幅度提高，剪切模量提高幅度不明显。用３—细胞模型和ＦＧＭ模型预测相应的力学性能和压缩强度，并与实验结果进行了比较。结果表明，３—细胞模型的结果与实验结果符合较好，ＦＧＭ模拟预测结果偏低。本文结果为编织结构的设计分析提供了依据。     

关于潜艇装备劳兰C导航仪技术问题的研究

本文提出了一种改善潜艇现有天线接收性能的方法,从而解决了在潜艇上安装使用劳兰C导航仪的关键技术问题。     

驱护舰编队对潜防御作战兵力运用

针对驱护舰武器装备的发展,结合现代海上对潜防御作战的新特点,对驱护舰编队在海上对潜防御作战中的兵力运用问题进行了探讨,提出了驱护舰编队对潜防御作战的指导思想、兵力运用原则和兵力攻击行动方式,并就确保编队的兵力行动提出了引导保障、安全保障应遵循的战术原则,对部队作战与训练具有一定的参考价值。     

日常交互中朋友关系强度度量方法

针对如何度量日常生活中人们之间的关系强度问题展开研究,提出一个从日常轨迹、语义位置以及语义标签三个层次度量朋友之间关系强度的层级模型FRSHV。采用动态时间规整模型通过计算朋友之间的空间距离来度量其日常轨迹之间的相似度,进而使用轨迹序列熵值对用户每天轨迹的相似度进行加权处理,将其作为朋友之间的关系强度;采用主题模型隐含狄利克雷分布分别计算朋友之间的基于语义位置和语义标签的行为模式的相似性,将其作为朋友之间的关系强度;采用集成学习的思想对三个层次的度量结果进行投票,以投票结果作为最终的朋友之间的关系强度。在公开数据集上对FRSHV模型的有效性进行实验验证,结果表明该模型能够有效地度量朋友之间的关系强度。     

Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

An artificial neural network (ANN) constitutive model is developed for high strength armor steel tempered at 500 °C, 600 °C and 650 °C based on high strain rate data generated from split Hopkinson pressure bar (SHPB) experiments. A new neural network configuration consisting of both training and validation is effectively employed to predict flow stress. Tempering temperature, strain rate and strain are considered as inputs, whereas flow stress is taken as output of the neural network. A comparative study on Johnson–Cook (J–C) model and neural network model is performed. It was observed that the developed neural network model could predict flow stress under various strain rates and tempering temperatures. The experimental stress–strain data obtained from high strain rate compression tests using SHPB, over a range of tempering temperatures (500–650 °C), strains (0.05–0.2) and strain rates (1000–5500/s) are employed to formulate J–C model to predict the high strain rate deformation behavior of high strength armor steels. The J-C model and the back-propagation ANN model were developed to predict the high strain rate deformation behavior of high strength armor steel and their predictability is evaluated in terms of correlation coefficient (R) and average absolute relative error (AARE). R and AARE for the J–C model are found to be 0.7461 and 27.624%, respectively, while R and AARE for the ANN model are 0.9995 and 2.58%, respectively. It was observed that the predictions by ANN model are in consistence with the experimental data for all tempering temperatures.     

碳纤维强度的统计特性及对复合材料线芯力学性能的影响

测试了国产T300级碳纤维的单丝和复丝拉伸强度,并用Weibull分布来描述碳纤维单丝平均拉伸强度。采用拉挤工艺制备出国产碳纤维复合线芯,测试了国产碳纤维复合线芯的弯曲强度和短梁剪切强度性能。结果表明:国产T300级碳纤维单丝拉伸强度性能达到东丽T300碳纤维水平,且分散性更小;复丝强度略低。国产T300级碳纤维集束性较差,在拉挤抽纱过程中,容易夹纱和起毛。在纤维体积含量基本相同情况下,国产T300级碳纤维复合线芯力学性能与东丽T700碳纤维复合线芯力学性能相差不大。     

求解卷积公式的一种新方法

基于数形结合方法以及变量代换方法发现计算卷积公式存在某些不足之处,研究卷积公式的计算方法,给出一种新的确定积分限的方法.该方法直观明了、容易理解和掌握并且可操作性强,有效避免作图和分析图形的繁琐,并举例说明了该应用方法.     

Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA7075

Tungsten inert gas (TIG) welding is the most commonly used joining process for aluminum alloy for AA6061 and AA7075 which are highly demanded in the aerospace engineering and the automobile sector, but there are some defects occur during TIG welding like micro-crack, coarse grain structure, and porosity. To improve these defects, the TIG welded joint is processed using friction stir processing (FSP). This paper presents the effect of friction stir processing on TIG welding with filler ER4043 and ER 5356 for dissimilar aluminum alloy AA6061 and AA7075. The mechanical characterization, finite element formulation and mathematical equations of heat transfer of TIG + FSP welded joints are investigated using ANSYS Fluent software by adjusting process parameters of FSP. The results show that the maximum compressive residual stress 73 MPa was obtained at the fusion zone (FZ) of the TIG weldment with filler ER4043, whereas minimum compressive residual stress 37 MPa was obtained at stir zone (SZ) of the TIG+FSP with filler 5356. The maximum heat flux 5.33 × 106 W/m2 and temperature 515 ℃ have observed at tool rotation 1600 rpm with a feed rate of 63 mm/min. These results give a satisfactory measure of confidence in the fidelity of the simulation     

榴弹隐身涂层粘合强度分析

隐身榴弹在发射过程中,表面涂敷的RAM将承受较大的加速度过载,为了保证发射过程中RAM不脱落,要求RAM具有克服过载的粘着强度。分析了榴弹涂敷隐身材料的强度要求,根据要求设计粘合胶强度、RAM的厚度和密度等参数,并进行实验验证。