岩质边坡开挖应力与变形的有限元模拟

采用非线形有限元数值模拟的方法,对岩质边坡开挖进行了数值分析。利用有限元软件ANSYS提供的单元生死功能模拟了重庆市某边坡锚杆挡墙工程逆作法施工的全过程,给出了其应力和变形的分布曲线,并对其应力和变形与未加锚时做了分析比较。算例表明,加入锚杆后边坡体上部水平位移分布曲线趋于平缓,在距坡脚约三分之一坡高的地方,比未加锚的水平位移值减少了15％。     

多传感器优化布站及管理算法研究

在多传感器优化布站和传感器管理算法研究中 ,提出了传感器覆盖系数和火力通道覆盖系数两个新概念 ,并据此给出了传感器优化布站原则 ,然后针对防空导弹武器系统所面临的各种复杂环境 ,对各种传感器管理算法进行了探讨。     

自增强厚壁圆筒残余应力分布规律研究

以火炮身管自增强处理为背景 ,根据炮钢材料实际的拉伸—压缩试验曲线和性能参数 ,将Bauschinger效应系数和强化效应系数作为加载阶段产生的相当塑性应变的函数 ,对厚壁圆筒自增强处理产生的残余应力分布规律进行了理论分析和实验研究。     

软硬交替多层膜法向压入过程的有限元分析

采用大变形弹塑性有限单元法,对高速钢基体上的软硬交替多层膜在法向压痕作用下的力学行为,进行了模拟和分析.为了研究膜层数和膜厚的影响,对从单层到16层的不同膜层体系进行了计算.通过对诸如膜层的变形、最大应力随膜层数的变化、界面剪应力分布、表面张应力分布等的分析,得出了这些参数的分布及其对膜层体系的摩擦学性能的影响.这些结果可为多层膜的结构优化设计提供定量的依据.     

基于RBAC的分布式数据库系统安全管理技术

分析了分布式数据库系统安全管理的必要性 ,引入了基于角色的访问控制模型 ,结合分布式数据库系统的开发实例 ,阐述了利用Delphi实现基于SQLServer的分布式数据库系统安全管理的技术。     

武器装备作战控制软件管理方法

随着科学技术不断进步 ,微处理器及其作战控制软件已被现代武器装备大量采用 ,作战控制软件发挥的作用越来越大 ,对软件的管理亦更加重要 ,通过对作战控制软件管理方面存在的问题的分析 ,提出了加强武器装备作战控制软件管理的方法     

图像处理技术在桨叶表面应力分布试验中的应用

介绍图像处理技术在桨叶表面应力分布测试试验中的应用情况 ,对实际使用中的图像处理技术进行了较详细的分析讨论 .经过处理后的桨叶试验图像 ,不仅增加了图像的清晰程度 ,而且从中可获得半定量以至定量的参数 ,以帮助对桨叶表面应力分布进行分析     

螺旋齿轮齿面接触应力理论计算

应用赫兹理论和齿轮啮合理论给出了螺旋齿轮齿面接触应力的计算方法和相关公式 .算例的计算结果表明螺旋齿轮齿面接触应力明显大于相近参数的圆柱斜齿轮 ,这是此类齿轮用于主传动时普遍出现齿面磨损的一个重要原因 ,因此在设计确定齿轮参数时必须校核接触应力 .     

An application of yield management for Internet Service Providers

In this paper we study strategies for better utilizing the network capacity of Internet Service Providers (ISPs) when they are faced with stochastic and dynamic arrivals and departures of customers attempting to log‐on or log‐off, respectively. We propose a method in which, depending on the number of modems available, and the arrival and departure rates of different classes of customers, a decision is made whether to accept or reject a log‐on request. The problem is formulated as a continuous time Markov Decision Process for which optimal policies can be readily derived using techniques such as value iteration. This decision maximizes the discounted value to ISPs while improving service levels for higher class customers. The methodology is similar to yield management techniques successfully used in airlines, hotels, etc. However, there are sufficient differences, such as no predefined time horizon or reservations, that make this model interesting to pursue and challenging. This work was completed in collaboration with one of the largest ISPs in Connecticut. The problem is topical, and approaches such as those proposed here are sought by users. © 2001 John Wiley & Sons, Inc., Naval Research Logistics 48:348–362, 2001     

Lateral stock transshipments in a two‐location inventory system with fixed and joint replenishment costs

We address the problem of inventory management in a two‐location inventory system, in which the transshipments are carried out as means of emergency or alternative supply after demand has been realized. This model differs from previous ones as regards its replenishment costs structure, in which nonnegligible fixed replenishment costs and a joint replenishment cost are considered. The single period planning horizon is analyzed, with the form and several properties of the optimal replenishment and transshipment policies developed, discussed and illustrated. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 525–547, 1999