电磁发射的出口速度及负载质量变化对导轨热量的影响

为分析不同发射出口速度、不同发射负载质量对导轨积累热量的影响,建立了导轨温度场模型,计算了导轨各点温度变化过程,并和光纤光栅温度传感器测量结果对比,验证了模型及测量结果的正确性。在此基础上,设计并进行了三种类型实验,分析了在不同发射速度、不同发射负载质量以及相同发射能级不同发射速度下的导轨热量积累差异。该结论为确定连发间隔、导轨冷却设计提供了有效参考。     

界面热阻对金刚石/银复合材料导热率的影响

研究了金刚石／银复合材料的导热率与金刚石的含量、粒度等之间的关系,着重讨论了界面热阻对复合材料导热率的影响。并阐述了金刚石表面镀钛,能有效改善金刚石对银的润湿性,降低界面热阻,从而提高金刚石／银复合材料的导热率。     

基于解析结构模型的网络空间信息防御能力分析

针对网络空间信息防御需求及特点,利用解析结构模型方法,分析网络空间信息防御能力的影响要素及其关系,建立网络空间信息防御能力影响要素的层次结构模型,并找出核心要素和关键环节,为网络空间信息防御能力建设提供决策支持。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

夜间通风量对相变轻质房间室内热环境的影响

运用EnergyPlus软件,对含相变材料层轻质房间的室内热环境进行了模拟,分析了墙体结构、通风量等因素对相变材料轻质墙体的蓄、放热性能和室内热环境的影响。模拟结果表明:相变材料应用于轻质房间,能显著增强围护结构的热惰性,提高室内的热舒适性;同时采取夜间通风技术,可以有效地将白天蓄积的热量散至室外。相变材料布置在围护结构内侧时,室内环境的热舒适性比布置在外侧时更好。从自然通风的角度,相变材料布置于围护结构内侧时,选取换气数2.5次/h作为优化结果;相变材料布置于围护结构外侧时,选取换气数4.0次/h作为优化结果。     

正常润滑条件下弧齿锥齿轮传动系统热变形对齿轮侧隙的影响

以某型直升机尾减速器弧齿锥齿轮传动系统为对象,建立该齿轮传动系统温度场仿真计算模型,计算获得在正常润滑条件下该齿轮传动系统的稳态温度场。基于当量齿轮原理,将弧齿锥齿轮副等效为法面当量直齿圆柱齿轮副,其啮合侧隙将直接反映在法面当量直齿圆柱齿轮副的端面上。利用热弹性力学原理,计算分析了正常润滑条件下传动系统的热变形对弧齿锥齿轮副啮合侧隙的影响,并得到了相关结论。为考虑热变形时正确确定弧齿锥齿轮副侧隙、保证工作精度,提供了理论依据。     

复合战斗部爆炸成型弹丸结构参数影响分析

应用AUTODYN仿真软件,对一种复合战斗部方案的爆炸成型弹丸成型性能进行了分析,结果表明,相对于传统布局方案,破片方案更改后改变了药型罩的成型过程,导致爆炸成型弹丸形状变差从而降低了毁伤性能。通过对结构参数影响进行分析,提出了优化方案,解决了破片方案调整后爆炸成型弹丸的成型问题。     

基于CAS理论的海上编队作战指挥优化控制问题研究

针对当前提高基于信息系统的体系作战能力客观要求,运用复杂自适应系统理论分析了信息化条件下的海上编队作战指挥控制问题,提出了基于CAS理论的海上编队作战指挥优化控制结构模型,并给出了信息化条件下编队指挥所的作战指挥决策流程,从而为有效构建信息化编队作战指挥体系、提高作战指挥能力奠定了理论基础。     

一种基于解析冗余关系的半定性故障隔离方法在航天器推进系统中的应用

针对航天器推进系统的时变特性以及随机因素给故障隔离带来的困难,提出了基于Z-检验分析和解析冗余关系相结合的半定性故障隔离方法。基于状态空间转换的思想,运用基于系统诊断键合图模型建立的解析冗余关系挖掘系统时不变的结构特征空间信息,并对解析冗余关系残差进行趋势分析获取时不变、具有残差变化方向的故障特征矩阵,针对存在随机因素对残差定性化的影响,利用了Z-检验分析对残差进行定性化获取观察特征,通过观测特征与故障特征的比较进行系统故障隔离。将该方法应用于推进系统的故障隔离中,结果证明了该方法能有效避免获取推进系统时变诊断准则以及来自系统建模和参数测量等随机因素的干扰,提高了推进系统故障隔离的鲁棒性。     

装甲车辆推进系统热管理及其应用

论述了装甲车辆热管理的概念及构成,分析了新型坦克推进系统热管理的重要意义;基于热管理的思想对某型装甲车辆动力系统进行了冷却系统智能化改造,结果表明:相关部件的热状态得到精确控制,冷却系统功耗显著降低,柴油机经济性明显改善。