基于CAS理论的海上编队作战指挥优化控制问题研究

针对当前提高基于信息系统的体系作战能力客观要求,运用复杂自适应系统理论分析了信息化条件下的海上编队作战指挥控制问题,提出了基于CAS理论的海上编队作战指挥优化控制结构模型,并给出了信息化条件下编队指挥所的作战指挥决策流程,从而为有效构建信息化编队作战指挥体系、提高作战指挥能力奠定了理论基础。     

视觉惯性导航系统初始化方法综述

视觉惯性导航系统通过初始化,对尺度信息、重力向量、速度、惯性传感器偏差等一系列状态估计所需参数进行快速求解,以提升系统后续导航定位与环境感知的准确性。根据传感信息耦合方式,视觉惯性导航系统初始化方法可以分为三类:联合初始化、非联合初始化和半联合初始化。基于现有研究工作,从基础理论、发展与分类、现有方法、性能评估四个方面展开,对目前主流的初始化方法进行综述,并总结视觉惯性导航系统初始化领域未来的发展趋势,有利于对视觉惯性导航系统初始化方法形成总体性了解并把握其发展方向。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

具有时变通信时延的多智能体系统的一致性

首先,给出一种适用于可连续通信并具有时变通信延迟的有向多智能体系统关于参考状态的一致性算法,基于此算法,各智能体协同变量关于参考状态的一致性问题被转化为一个误差系统的稳定性问题.然后,利用Lyapunov稳定性理论,推导出多智能体系统在该算法作用下达到一致性的充分性判据,并由矩阵不等式的形式描述.结果表明:当时延函数有...     

加权振动烈度在齿轮箱状态监测中的应用研究

针对齿轮箱运行过程中状态监测的性能特征参量及其评价标准的确定问题,研究以齿轮箱振动烈度为性能特征参量,依照国标GB6075—1985来判定齿轮箱运行状态,提出在特征频率处计算振动烈度,即加权振动烈度,以此作为监测量来判定齿轮箱性能状态,并可以对故障进行初步定位。     

基于全维PI观测器的混沌系统鲁棒故障检测设计

研究了在干扰存在情况下基于全维PI观测器的混沌系统鲁棒故障检测设计问题。基于一类Sylvester矩阵方程的参数化解,给出了干扰和残差信号解耦的充要条件,并建立了具有鲁棒故障检测功能的全维PI观测器设计的参数化方法。Lorenz混沌系统的数值算例及其计算结果表明：在干扰存在的情况下,基于全维PI观测器的混沌系统鲁棒故障检测设计方法简单有效。     

脉冲电场诱导乳化油乳胶粒子的振动及计算

脉冲电场作用下,乳化油中乳胶粒子会发生长球状的伸缩振动,但目前对于粒子振动的研究较少.通过建立乳胶粒子振动的动力学模型得出粒子的非线性参激振动方程,对振动阻力和恢复力系数进行函数逼近处理,运用谐波平衡法对振动方程进行计算,得到粒子振动的一次近似解以及幅频特性曲线.数值实验表明,粒子振幅的一次近似解与振动方程的四阶Run...     

汉江大跨越输电模型塔试验研究

为了深入探索模型塔动力特性,以汉江大跨越塔为原型,按照动力相似理论制作了模型塔.试验采用施加突卸荷载的方法使模型产生自由振动,获取模型动力参数.结果表明,模型前两阶固有频率满足相似要求,模型设计合理.为更好地研究模型塔动力特性,在模型塔动力测试基础上,建立了模型塔有限元模型,对测试结果与模态分析结果进行了比较,提出了模...     

探火管灭火装置在电气设备火灾防控中的应用

针对电气设备火灾防控难度大的问题,分析了传统气体灭火系统在电气设备火灾防控中存在的缺陷,介绍了探火管灭火装置的基本构成,分析了在特定的电气设备火灾防控中,采用探火管灭火装置替代传统气体灭火系统的优势,并给出探火管灭火装置实际应用案例,探讨了探火管灭火装置的应用前景。     

围绕集约共享搭建炮兵部队基于信息系统的训练平台

破敌防御中机动作战行动,必须坚持贯彻信息先导、火力主战、兵力主控的作战原则,灵活采取打击敌机动＂源头＂、遮蔽敌机动视野、切断防御流动和抢夺机动通道的手段,削弱敌整体防御能力。