动载体光电平台图像模糊成像机理研究

动载体光电平台的振动导致光电系统在曝光时间内与目标发生相对运动产生像移,严重影响了成像质量。针对振动引起图像模糊的成像问题的复杂性,提出从数学模型的角度,建立振动产生模糊图像的频域数学模型,从而明确表示图像模糊的成像机理。根据建立的模糊图像数学模型,将一幅清晰的图像仿真得到振动模糊图像,仿真结果验证了推导建立的数学模型的正确性。通过对振动产生的模糊图像数学模型的建立,可以为设计准确有效的振动模糊图像仿真算法提供重要的参考。     

Ballistic response of armour plates using Generative Adversarial Networks

It is important to understand how ballistic materials respond to impact from projectiles such that informed decisions can be made in the design process of protective armour systems. Ballistic testing is a standards-based process where materials are tested to determine whether they meet protection, safety and performance criteria. For the V₅₀ ballistic test, projectiles are fired at different velocities to determine a key design parameter known as the ballistic limit velocity (BLV), the velocity above which projectiles perforate the target. These tests, however, are destructive by nature and as such there can be considerable associated costs, especially when studying complex armour materials and systems. This study proposes a unique solution to the problem using a recent class of machine learning system known as the Generative Adversarial Network (GAN). The GAN can be used to generate new ballistic samples as opposed to performing additional destructive experiments. A GAN network architecture is tested and trained on three different ballistic data sets, and their performance is compared. The trained networks were able to successfully produce ballistic curves with an overall RMSE of between 10 and 20 % and predicted the V₅₀ BLV in each case with an error of less than 5 %. The results demonstrate that it is possible to train generative networks on a limited number of ballistic samples and use the trained network to generate many new samples representative of the data that it was trained on. The paper spotlights the benefits that generative networks can bring to ballistic applications and provides an alternative to expensive testing during the early stages of the design process.     

运载火箭随机振动环境试验条件的变带宽设计方法

针对运载火箭随机振动环境试验条件提出了基于能量等效思想的变带宽设计方法,通过采用分数倍频程数据处理方法,并确保各个频带内的均方根值与原随机振动环境的均方根值相同,有效解决传统的等带宽随机振动环境试验条件总均方根过高的问题。为了验证所提方法的有效性,通过典型管路产品进行了随机振动响应计算。结果表明,该方法既能够有效地对产品进行考核,又不至于对产品造成过考核。所提变带宽设计方法可为运载火箭随机振动环境条件的合理设计与分析提供有效手段。     

Monitoring and Prediction of the Vibration Intensity of Seismic Waves Induced in Underwater Rock by Underwater Drilling and Blasting

All underwater drilling and blasting operations generate seismic waves.However,due to a lack of suitable vibration sensing instruments,most studies on the propagation of seismic waves have been limited to shorelines near construction areas or wharfs,whereas comparatively few studies have been conducted on the larger seafloor itself.To address this gap,a seafloor vibration sensor system was developed and applied in this study that consists of an autonomous acquisition storage terminal,soft-ware platform,and hole-plugging device that was designed to record the blasting vibration intensities received through submarine rocks at a given measurement point.Additionally,dimensional analyses were used to derive a predictive equation for the strength of blast vibrations that considered the in-fluence of the water depth.By combining reliable vibration data obtained using the sensor system in submarine rock and the developed predictive equation,it was determined that the water depth was an important factor influencing the measured vibration strength.The results using the newly derived equation were compared to those determined using the Sadowski equation,which is commonly used on land,and it was found that predictions using the derived equation were closer to the experimental values with an average error of less than 10％,representing a significant improvement.Based on these results,the developed sensor system and preliminary theoretical basis was deemed suitable for studying the propagation behavior of submarine seismic waves generated by underwater drilling and blasting operations.     

齿轮箱振动测试与分析

在对某型齿轮箱的模态、振动烈度和振动加速度进行测试的基础上,详细分析了测试结果.模态测试得到了齿轮箱的振型和模态参数,振动烈度测试结果表明该齿轮箱处于良好工作状态,振动加速度测试结果显示该齿轮箱的减振措施达到了预期的效果.最后,对测试提出了建议.     

基于DTRC的形式自动证明平台及其应用

动态项重写计算(DTRC)是项重写系统(TRS)的元计算模型,具有层次化结构和动态重写等特征,可应用于归纳定理的形式自动证明以及项重写系统弱终止性的形式自动证明等方面.文中介绍了一个基于DTRC的形式自动证明平台及其在TRS弱终止性自动证明上的应用.     

基于MAS的武器装备供应管理支持系统设计

对武器装备供应管理系统结构和功能进行了分析,给出系统的一般构成模式和运行要求,阐明了其所需的决策支持;以系统一般模式为背景,探讨了利用多Agent系统理论构建装备供应管理支持系统的思路,提出支持系统的组成框架,并说明了其主要特点;最后,对支持系统的信息监控过程做了具体研究,给出了相应程序。     

两栖装甲装备车内环境的测试与分析

综合运用噪声传感器、温度传感器、压电加速度传感器以及PXI采集器等设备,对影响两栖装备乘员持续战斗能力的环境适应性数据进行了采集与分析,得出了评估结果,找出了影响装备战斗力发挥的环境适应性因素,提出了相应的解决方案.     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket's departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.