基于特征结构配置的车辆主动悬架控制器设计

基于特征结构配置参数化方法,提出了车辆主动悬架控制器设计方法,其目的是设计一组状态反馈控制器,使得闭环结构系统具有希望极点和特征向量。该方法提供的自由参数,可用来满足系统的鲁棒性能等指标。该方法直接基于车辆悬架系统的参数矩阵,故便于工程应用。对车辆悬架系统进行仿真分析,结果表明该设计方法简单有效。     

基于频响函数的悬臂结构损伤识别

根据频响函数的Neumann级数展开式,提出了悬臂结构的损伤识别方法。首先根据频响函数的Neumann级数展开式,推导了损伤参数与频响函数的关系式,以此为基础建立损伤识别方程组;其次,考虑到噪声影响,求解时采用了多频率点的最小二乘法,以减小由噪声引起的误差;最后用一个悬臂结构模型对所提方法进行了验证。     

无限质量降落伞充气动力学数值模拟

为分析降落伞火星再入环境下的超声速开伞性能,基于任意欧拉-拉格朗日罚函数法和多介质任意拉格朗日欧拉算法,求解可压缩流场与降落伞结构的耦合动力学模型。数值模拟盘缝带伞超声速开伞过程外形变化,预测气动力作用下的伞衣织物三维结构动力学行为。结合风洞试验数据,对比分析降落伞开伞性能和前置体对伞衣充气外形的影响。最终给出超声速伞周围非稳态流场的尾流和激波分布。仿真结果表明:盘缝带伞在超声速开伞过程中被完全充满且充气效果良好,未出现塌陷情况;随着来流马赫数的增加,降落伞阻力系数逐渐减小,充气时间缩短。仿真结果与试验结果保持一致,验证了所提方法的有效性。     

磁悬浮列车系统轨道动力学分析与试验研究

本文建立了磁悬浮列车系统轨道动力学方程组,讨论了轨道结构参数对弹性轨变形、极限速度及模态的影响,并结合KDⅢ车的试验结果作出分析。     

数码仿造迷彩客观定量评价

为了客观定量评价数码仿造迷彩的伪装效果,根据人眼视觉特性,提出基于HSV颜色空间亮度差的权重因子对SSIM算法加权进行了改进,得到了从人眼视觉特性上客观定量评价数码迷彩图案与原图像的识别概率。识别概率的大小与目标实施伪装技术的优劣有关,识别概率越高,则目标越易被侦察器材识别,伪装效果越差,反之不易被识别,伪装效果越好。因此该算法可为进一步改进伪装技术措施提供依据。     

Dynamic globularization prediction during cogging process of large size TC11 titanium alloy billet with lamellar structure

The flow behavior and dynamic globularization of TC11 titanium alloy during subtransus deformation are investigated through hot compression tests. A constitutive model is established based on physical-based hardening model and phenomenological softening model. And based on the recrystallization mechanisms of globularization, the Avrami type kinetics model is established for prediction of globularization fraction and globularized grain size under large strain subtransus deformation of TC11 alloy. As the preliminary application of the previous results, the cogging process of large size TC11 alloy billet is simulated. Based on subroutine development of the DEFORM software, the coupled simulation of one fire cogging process is developed. It shows that the predicted results are in good agreement with the experimental results in forging load and microstructure characteristic, which validates the reliability of the developed FEM subroutine models.     

Experimental investigation of a cook-off temperature in a hot barrel

The experimental investigations of the effect of contact time/temperature on initiating the cook-off using 7.62 mm calibre cartridge cases (CC) were conducted previously. These cartridges were filled with commercial off-the-shelf (COTS) double based (DB) propellant (Bulls Eye) and were loaded in a hot chamber. The thermal explosion temperature is of great significance to both weapon designers and safety inspectors as it provides the operational limit and safe operating temperature. For CC under test, it was found that the cook-off temperatures of this propellant were encountered with the heat transfer profile of the simulated gun barrel between 151.4 °C and 153.4 °C, with a reaction occurring in less than 300 s after the round was chambered. Usefully, each experiment was found to be consistent and repeatable.     

基于模糊信息粒化理论的图像插值方法

提出了模糊信息粒化理论在图像插值中的应用,介绍了图像的模糊信息粒化结构,分析了基于图像模糊粒化思想进行图像插值的基本原理,并提出了具体的基于图像模糊粒化结构的插值方法。实验结果表明该方法的效果很好,在客观评价指标上,性能普遍好于传统的图像插值方法。     

新课标高考物理试卷的命题特点及备考策略

高考复习是一个系统工程,每一个环节要精心筹划,落实到位,才能取得好的效果。文章认真分析2008～2011年新课标高考物理试卷的结构和命题特点,探讨了今后高考命题的动向和规律,提出了可操作的备考策略。     

基于形态滤波的漏磁信号基线漂移在线处理

为了实现快速漏磁检测,采用形态滤波的方法对漏磁信号的基线漂移进行在线处理．首先,运用Maragos类型形态滤波器,选择平面结构元素作为最佳形态滤波形式,并通过实验得到最佳结构元素选取标准;然后,利用该滤波器和小波分解的方法分别对仿真信号和采集到的漏磁信号进行基线漂移的处理．结果表明：形态滤波的方法能够实时准确地实现基线漂移的去除．