自旋稳定动能拦截器轨控发动机推力控制

提出了大气层外自旋稳定式动能拦截器的一种典型轨控发动机阵列布局.在分析小发动机工作的各种约束条件的基础上,推导了发动机推力角度、推力大小和冲量效率的计算公式,提出了发动机工作的控制方法.在各种初始条件下进行拦截仿真,所得的脱靶量均在0.3 m以内,可视为直接碰撞命中目标.同时通过仿真分析了冲量效率与自旋速度、发动机工作时间、每圈发动机个数的关系.     

MEMS惯性测量组合在无人机飞行参数测量中的应用

介绍了在无人机飞行试验中应用MEMS微惯性测量组合来解算飞行姿态、速度位置等参数的某个实例.试验结果表明,由此系统所得到的数据及曲线能够很好地描述实际飞行过程.试验数据为进一步地相关分析提供了有利的依据.     

坦克装甲车辆火控观瞄系统发展趋势分析

从火控总体的角度总结了国内外坦克装甲车辆火控观察瞄统的发展过程、现状,分析了观察瞄统的发展特点.对新近发展起来的顶置遥控武器站进行了初步研究,对其应配属的观瞄系统形式进行了探讨.在对未来装备需求和技术发展深入分析的基础上,提出了坦克装甲车辆火控观瞄系统未来的发展方向和需要重点突破和解决的关键技术.     

Research on simultaneous localization and mapping for AUV by an improved method: Variance reduction FastSLAM with simulated annealing

At present, simultaneous localization and mapping (SLAM) for an autonomous underwater vehicle (AUV) is a research hotspot. Aiming at the problem of non-linear model and non-Gaussian noise in AUV motion, an improved method of variance reduction fast simultaneous localization and mapping (FastSLAM) with simulated annealing is proposed to solve the problems of particle degradation, particle depletion and particle loss in traditional FastSLAM, which lead to the reduction of AUV location estimation accuracy. The adaptive exponential fading factor is generated by the anneal function of simulated annealing algorithm to improve the effective particle number and replace resampling. By increasing the weight of small particles and decreasing the weight of large particles, the variance of particle weight can be reduced, the number of effective particles can be increased, and the accuracy of AUV location and feature location estimation can be improved to some extent by retaining more information carried by particles. The experimental results based on trial data show that the proposed simulated annealing variance reduction FastSLAM method avoids particle degradation, maintains the diversity of particles, weakened the degeneracy and improves the accuracy and stability of AUV navigation and localization system.     

Clustered coverage orienteering problem of unmanned surface vehicles for water sampling

This study investigates a clustered coverage orienteering problem (CCOP), which is a generalization of the classical orienteering problem. The problem is widely motivated by the emerging unmanned techniques (eg, unmanned surface vehicles and drones) applied to environmental monitoring. Specifically, the unmanned surface vehicles (USVs) are used to monitor reservoir water quality by collecting samples. In the CCOP, the water sampling sites (ie, the nodes) are grouped into clusters, and a minimum number of nodes must be visited in each cluster. With each node representing a certain coverage area of the water, the objective of the CCOP is to monitor as much as possible the total coverage area in one tour of the USV, considering that overlapping areas provide no additional information. An integer programming model is first formulated through a linearization procedure that captures the overlapping feature. A two-stage exact algorithm is proposed to obtain an optimal solution to the problem. The efficiency and effectiveness of the two-stage exact algorithm are demonstrated through experiments on randomly generated instances. The algorithm can effectively solve instances with up to 60 sampling sites.     

固体药燃气逆向喷流热防护有效性分析

针对高超声速飞行器逆向喷流介质供应,采用固体药燃烧产生的燃气作为喷流的介质,来减小供应系统的质量与体积。采用数值计算的方法对高速飞行器球头逆向喷流流场进行数值模拟,分析不同飞行条件下高温燃气对球头热防护的影响。研究表明,采用高温燃气会减弱逆向喷流的热防护效果,但是对比无逆向喷流的驻点热流,最大热流仍然存在大幅度的下降。通过调节喷流压力,在不增加喷流质量的情况下,高温燃气逆向喷流可以取得与常温介质一致的热防护效果。针对6马赫数以上的飞行,现有的固体药燃气温度能够对飞行器头部实现有效的热防护。     

再入飞行器弹道系数的自适应估计

运用Kalman滤波方法对再入飞行器的跟踪问题进行了分析,在动力学噪声已知的情况下,给出了一种弹道系数的自适应估计方法;在动力学噪声未知时,给出了弹道系数和动力学噪声方差的自适应估计方法。仿真算例表明这种方法是合理有效的。     

装甲车辆计划预防工作时机及范围的确定

利用装甲车辆使用中的可靠性统计数据,确定装置(构件)计划预防工作时机的方法,论述了从单一装置(构件)的计划预防工作,向整车的计划预防工作转化时装甲车辆计划预防时机及范围的确定原则,对装甲车辆部署初期的保养间隔期和修理间隔期的确定或修订具有理论及实践上的指导意义;给出了根据装置(构件)技术状态检测结果,独立确定装置(构件)计划预防工作时机的方法、实例以及需要解决的关键技术问题。     

“装甲车辆驾驶“课程教学改革与实践

根据新型军事工程复合型人才的培养目标和新教学大纲的特点,阐述了“装甲车辆驾驶”课程教学改革的必要性,研究制定了该课程的试行教学大纲的实施方案,与以往“装甲车辆驾驶”课程的实施方案、考核方式等进行了对比分析,结合教学改革工作的实践,系统总结了所取得的成果。实践证明,这项教学改革是必须的、科学的、合理的、可行的,教学改革具有极大的推广和应用前景。     

高速磁浮列车气隙磁场测量系统的研究

介绍了高速磁浮列车气隙磁场测量系统研制中的几项关键技术,提出了三维磁敏传感器的设计方法和基于霍尔元件的电压比磁场测量法,并设计了传感器的高精度运动控制系统。所研制的系统具有较高的测磁精度和定位精度,实现了高速磁浮列车气隙磁场的自动测量。