基于Holtrop公式与遗传算法的船型参数优化

针对方尾水面舰船,采用Holtrop阻力计算公式,以总阻力为目标函数,据遗传算法,对主要的船型参数进行了优化计算,进而得出了在一系列速度下主要船型参数的最优解及相应的由Holtrop公式计算得到的总阻力,并绘制了在各最优解下由Holtrop公式计算的总阻力随速度的变化曲线,结合Holtrop公式相应图谱对所得优化计算结果进行了分析.结果表明,该方法对于水面舰船的主尺度比等船型参数优选具有较强的实用性.     

基于均匀设计的临近空间无动力攻击器运动参数响应面建模

为探求临近空间无动力攻击器运动参数的解析模型,采用均匀设计试验方法,以攻击器发射参数为设计变量,从设计空间中选择一些特定的设计点,构造了临近空间攻击器速度、射程以及飞行时间的响应面模型。通过仿真算例,对各响应面模型分别进行显著性检验,证明了所建立的响应面都具有较高的近似精度。     

双枝模糊评判在舰炮性能评估中的应用

针对舰炮武器性能指标,运用双枝模糊决策方法对舰炮武器性能进行综合评估。该方法提出了新的论域[-1,1]使评估更能符合人的思维逻辑,能够客观的对舰炮性能进行评估,通过对多中舰炮的具体参数指标进评估,得出各种舰炮的性能优劣的排序,具体的数学模型仿真表明,对舰炮武器性能的评估是行之有效的。     

光学阵列器件的慢刀伺服车削加工技术

慢刀伺服技术是相对于快刀伺服提出的方法.采用C轴、X轴、Z轴联动的方法在极坐标或圆柱坐标内进行加工.光学阵列如微透镜阵列、微反射镜阵列在高速数据、声音和视频信号传输中具有重要作用.将光学阵列看作一个自由曲面,使用慢刀伺服车削技术一次加工成形,可以解决传统加工中将光学阵列分块加工后拼装和调整的困难.但是由于光学阵列表面形状复杂,其表面法线的突变可能会使机床运动超出伺服轴执行能力.根据慢刀伺服加工技术的特点,建立了伺服轴执行能力限制曲线,研究了不同刀具半径补偿方式对加工的影响.实验结果表明,根据机床伺服轴执,厅能力合理选择刀具半径补偿方式可实现微光学阵列器件高精度加工.     

内表面间垂直度的高精度测量方法设计与误差分析

针对框体类零件超精密加工的难点问题--内表面问垂直度误差的高精度测量,提出了一种基于波面干涉技术测量的新方法,建立了垂直度测量系统,分析了各调整误差对测量结果的影响.该方法能够实现框体类零件内表面间垂直度误差的高精度测量与评价,并能得到误差的三维分布,测量结果可直接用于零件的确定性修形加工.实验表明,该方法可实现0.6"的综合测量精度.     

Integrated guidance and control of guided projectile with multiple constraints based on fuzzy adaptive and dynamic surface

Based on fuzzy adaptive and dynamic surface (FADS), an integrated guidance and control (IGC) approach was proposed for large caliber naval gun guided projectile, which was robust to target maneuver, canard dynamic characteristics, and multiple constraints, such as impact angle, limited measurement of line of sight (LOS) angle rate and nonlinear saturation of canard deflection. Initially, a strict feedback cascade model of IGC in longitudinal plane was established, and extended state observer (ESO) was designed to estimate LOS angle rate and uncertain disturbances with unknown boundary inside and outside of system, including aerodynamic parameters perturbation, target maneuver and model errors. Secondly, aiming at zeroing LOS angle tracking error and LOS angle rate in finite time, a nonsingular terminal sliding mode (NTSM) was designed with adaptive exponential reaching law. Furthermore, combining with dynamic surface, which prevented the complex differential of virtual control laws, the fuzzy adaptive systems were designed to approximate observation errors of uncertain disturbances and to reduce chatter of control law. Finally, the adaptive Nussbaum gain function was introduced to compensate nonlinear saturation of canard deflection. The LOS angle tracking error and LOS angle rate were convergent in finite time and whole system states were uniform ultimately bounded, rigorously proven by Lyapunov stability theory. Hardware-in-the-loop simulation (HILS) and digital simulation experiments both showed FADS provided guided projectile with good guidance performance while striking targets with different maneuvering forms.     

Clustered coverage orienteering problem of unmanned surface vehicles for water sampling

This study investigates a clustered coverage orienteering problem (CCOP), which is a generalization of the classical orienteering problem. The problem is widely motivated by the emerging unmanned techniques (eg, unmanned surface vehicles and drones) applied to environmental monitoring. Specifically, the unmanned surface vehicles (USVs) are used to monitor reservoir water quality by collecting samples. In the CCOP, the water sampling sites (ie, the nodes) are grouped into clusters, and a minimum number of nodes must be visited in each cluster. With each node representing a certain coverage area of the water, the objective of the CCOP is to monitor as much as possible the total coverage area in one tour of the USV, considering that overlapping areas provide no additional information. An integer programming model is first formulated through a linearization procedure that captures the overlapping feature. A two-stage exact algorithm is proposed to obtain an optimal solution to the problem. The efficiency and effectiveness of the two-stage exact algorithm are demonstrated through experiments on randomly generated instances. The algorithm can effectively solve instances with up to 60 sampling sites.     

嵌入遗传算法的顺轨干涉SAR海表流场反演新方法

顺轨干涉SAR海表流场探测技术研究对于实现流场探测的全球化、精细化具有重要作用。为了提高海表流场迭代收敛速度和参数反演精度,依据校正系数的参数特点构建适应度函数的约束关系,将校正系数设计问题转化为仿真干涉相位与实测干涉相位差和雷达、平台参数约束条件下的比例因子选择问题,进而设计遗传算法计算校正系数的技术方法,并嵌入海表流场迭代反演算法,从而构建一种反演新方法。星载SAR数据仿真实验结果表明:海表流向反演的均方根误差优于10.0°,海表流速的均方根误差优于0.1 m/s,这符合海表流场反演精度要求。改进的海表流场反演算法可减少2~3次迭代,有效提高了反演效率。研究对于提高顺轨干涉SAR海表流场探测的实效性和准确性具有重要意义。     

An air cavity method for increasing the underwater acoustic targets strength of corner reflector

In order to improve the underwater acoustic target strength of corner reflectors, according to the principle of acoustic impedance mismatch of the boundary layer, the method of using air cavity to increase the underwater acoustic target strength of corner reflectors is proposed. The acoustic reflection coefficients of underwater air layer and single layer metal sheet are calculated and compared. The results show that the reflection coefficient of single layer metal sheet is greatly affected by frequency and incidence angle, and the reflection coefficient of air layer in water is large and little affected by frequency and incidence angle. On this basis, a new kind of airfilled cavity corner reflector is designed. The acoustic scattering characteristics of underwater airfilled cavity corner reflector are calculated cumulatively, and the results are compared with the monolayer metal sheet corner reflector. The simulation results show that the acoustic reflection effect of the airfilled cavity corner reflector is better. In order to verify the correctness of the method, the test was carried out in the silencing tank. The experimental results show that the simulation results are in good agreement with the experimental results, and the airfilled cavity can improve on acoustic reflection performance of the underwater corner reflector.     

考虑落角约束与驾驶仪特性的自适应径向基空间末制导律

为使舰炮制导炮弹在打击近岸机动目标的末制导段满足落角约束,考虑驾驶仪动态特性,基于自适应径向基逼近网络与动态面提出一种空间末制导律。构建弹目相对运动模型,通过带改进微分跟踪器的扩张状态观测器估计目标加速度。为零化视线角跟踪误差与角速率,采用自适应指数趋近律设计非奇异终端滑模,运用自适应径向基逼近网络削弱控制指令抖振。通过Lyapunov第二法证明了系统的视线角跟踪误差与视线角速率均最终一致有界。仿真实验表明:该末制导律使制导炮弹在空间中打击不同机动形式的近岸目标时,具备良好的末制导性能。