十二相同步发电机带桥式整流负载时的换相电抗

本文分析了十二相(四Y移15°绕组)同步发电机带桥式整流负载时的换相过程,给出了十二相和六相(双Y移30°绕组)同步发电机等效换相电抗的计算公式。     

红外导弹制导系统检测的仿真研究

介绍了用简化红外导弹运动学和动力学模型的方法,对导弹的方位和俯仰二个制导系统作单独的仿真检测,介绍了仿真系统的原理及所需设备。可以从计算机屏幕上作图,以判断检测结果。     

一种新的对潜应召搜索法及其效能分析

论述了一种新的对潜应召搜索法 ,并对其效能进行了分析 ,同时就平均发现概率、搜索时间、转向次数三个指标与海军现在使用的扩展方阵搜索法进行了仿真比较     

以太网交换机仿真与验证

叙述了以太网交换机的结构、端口缓存交换策略,从排队论出发建立仿真模型和仿真流程,按数理统计原理用t函数进行均值假设检验,验证仿真模型及流程的可信度。文章叙述以太网交换机仿真模型与算法对进行计算机网络仿真有参考价值。     

高性能永磁交流伺服系统研究

重点介绍了永磁交流伺服系统的控制策略,位置检测和辨识、主电路和驱动技术等关键技术.在研究了其物理方程、转矩方程和等效电路的基础上,提出了永磁同步电机的数学模型.叙述了矢量控制的原理,构建了永磁同步电机交流伺服系统,并对上述电机模型,矢量控制方法及相关硬件设计进行了研究.     

MABAC method for multiple attribute group decision making under q-rung orthopair fuzzy environment

As the generalization of intuitionistic fuzzy set (IFS) and Pythagorean fuzzy set (PFS), the q-rung orthopair fuzzy set (q-ROFS) has emerged as a more meaningful and effective tool to solve multiple attribute group decision making (MAGDM) problems in management and scientific domains. The MABAC (multi-attributive border approximation area comparison) model, which handles the complex and uncertain decision making issues by computing the distance between each alternative and the bored approximation area (BAA), has been investigated by an increasing number of researchers more recent years. In our article, consider the conventional MABAC model and some fundamental theories of q-rung orthopair fuzzy set (q-ROFS), we shall introduce the q-rung orthopair fuzzy MABAC model to solve MADM problems. at first, we briefly review some basic theories related to q-ROFS and conventional MABAC model. Furthermore, the q-rung orthopair fuzzy MABAC model is built and the decision making steps are described. In the end, An actual MADM application has been given to testify this new model and some comparisons between this novel MABAC model and two q-ROFNs aggregation operators are provided to further demonstrate the merits of the q-rung orthopair fuzzy MABAC model.     

On the reduction of total‐cost and average‐cost MDPs to discounted MDPs

This article provides conditions under which total‐cost and average‐cost Markov decision processes (MDPs) can be reduced to discounted ones. Results are given for transient total‐cost MDPs with transition rates whose values may be greater than one, as well as for average‐cost MDPs with transition probabilities satisfying the condition that there is a state such that the expected time to reach it is uniformly bounded for all initial states and stationary policies. In particular, these reductions imply sufficient conditions for the validity of optimality equations and the existence of stationary optimal policies for MDPs with undiscounted total cost and average‐cost criteria. When the state and action sets are finite, these reductions lead to linear programming formulations and complexity estimates for MDPs under the aforementioned criteria.© 2017 Wiley Periodicals, Inc. Naval Research Logistics 66:38–56, 2019     

基于FPGA的数字复接系统的同步技术研究

针对数据大容量通信时常因同步问题而面临失败的问题,分析了数字复接系统工作原理,探究了收发端高精度时钟基准同步方法在时钟校正的应用,以及位同步和帧同步的典型同步技术,并利用FPGA仿真验证了数据复接过程。数据通信依赖于收发端同步技术的建立,认为将收发端时钟同步、位同步、帧同步应用在复接系统的不同部分,能够共同作用以实现收发端数据传输的同步。卫星双向时间比对法能够有效校准收发端的高精度时钟,校准精度优于0.5 ns;数字锁相法能够自动将收发端时钟校准到同频同相的状态,有效实现位同步;在每个数据帧当中加入帧同步信号可以使收发端自动判断每一帧的数据传输状态。FPGA技术为数据仿真提供良好平台,利用其完成了过零信号的提取和数据帧同步的复接的仿真,达到预期效果。     

多级电磁线圈发射器时序触发控制策略

为优化多级同步感应线圈电磁发射器性能,以提高发射速度和能量转换效率为检验指标,以影响上述指标的触发时序为优化对象,采用遗传算法建立单级同步感应线圈型电磁发射器触发位置优化数学模型,计算最佳触发位置,通过数值和有限元两种仿真系统对优化结果的正确性进行验证。采用该方法对两级以及十级同步感应线圈型电磁发射器的触发时序进行优化研究,并进行仿真验证。为解决仿真系统误差问题,提出采用动子线圈在各级的触发位置和速度作为控制因素的双控触发方式,并研究分析仿真过程中触发开关的随机抖动对出口速度误差的影响,得到最佳触发时序控制策略。     

量测误差的时间序列分析方法

针对工程实践中实际量测误差大多并非纯白噪声特点,运用概率统计学的一个分支——时间序列分析中提供的动态数据处理的方法,采用多种的参数估计算法来对量测误差进行拟合和仿真,给出了实验室仿真过程中需叠加的量测误差的新生成办法。所用方法可以推广到对其它数据序列的处理。