一体化射频通信体系对抗的仿真系统设计

简要介绍了射频通信体系对抗仿真中的模型,一体化建模方法.以红方对蓝方通信进行干扰为例分析了通信体系对抗仿真的功能模块,提出了对抗框架.介绍了几种常用的干扰方法,提出对抗的方法和策略,并通过实例说明通信体系对抗的方法和策略.     

武器系统模糊寿命周期费用模型

武器系统的寿命周期费用建模较多采用参数法,而参数法中最常用的是最小二乘回归.考虑费用统计数据的模糊性,提出用模糊最小二乘回归来建立武器系统模糊寿命周期费用模型,并结合实例对武器系统寿命周期费用进行了分析.结果表明,这种方法能达到令人满意的拟合精度,具有实用价值.     

粗糙神经网络的航空电子系统故障诊断方法

提出了一种基于粗糙神经网络的航空电子系统故障诊断方法.该方法运用粗糙集理论进行知识规则的提取,用提取的规则对航空电子系统输出数据进行分类,再用神经网络对每一类进行辨识,最后用粗糙集分类结果与各个神经网络输出进行综合得到系统一步预测结果,将该预测结果与航空电子系统实际输出进行阀值比较,进而进行故障诊断.实际应用表明该方法可行并能够有效地检测系统故障,故障诊断率高.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

OFDM系统中深度神经网络指导的IQ不平衡补偿算法

正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)是现代移动通信中一项重要的物理层通信技术,并且OFDM系统要求子载波间严格正交。然而,在实际系统中,振荡器和滤波器等器件的非理想特性会导致同相正交(In-phase and Quadrature-phase,IQ)不平衡,从而破坏子载波的正交性,严重影响OFDM系统的性能。通过研究IQ不平衡对OFDM系统的影响,提出了一种并联深度神经网络架构下的IQ不平衡补偿算法。该算法利用了深度神经网络不依赖于模型的特点,直接从接收到的频域信号恢复原输入信号的二进制序列,并利用干扰信号来自镜像子载波的先验知识来初始化模型驱动的神经网络,加快其网络优化的收敛速度。仿真结果表明,该算法能有效地补偿IQ不平衡失真,并且在幅度和相位失真的补偿上,其性能都优于传统的基于导频的最小二乘补偿算法,证明了深度学习方法解决物理层问题的优越性。     

干扰抑制类生成式对抗网络

为进一步改善超低频频段的通信质量,在传统改进广义旁瓣抵消算法的基础上,提出新的超低频干扰抑制算法——生成式旁瓣抵消算法。该算法将人工智能研究热点之一的生成式对抗网络模型引入广义旁瓣抵消算法中,通过优化设计生成模型的网络结构及相关超参数,有效地解决了原算法存在的期望信号残留问题,为旁瓣抵消通道中的后级滤波算法提供了与主通道相关性更强的干扰参考信息,从而提高了算法对主通道干扰估计的准确性。为了验证优化后生成模型的有效性以及所提算法对不同类别干扰的抑制能力,在实验室环境下搭建实验平台,设计了多组对照实验。实验结果表明:优化后的生成模型具有较好的生成能力、较好的鲁棒性以及相对较低的运算复杂度;相比于传统改进的广义旁瓣抵消算法,所提算法进一步提高了信号带宽内的信干噪比。     

Performance evaluation and optimization design of photoelectric pyrometer detection optical system

The measurement and control of high temperature play very important roles in national defense, military, scientific experiments, industrial and agricultural production. Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement. It has an important application in the field of high temperature measurement, and its performance directly affects the accuracy of temperature measurement. By improving the design of the detection optical system of the photoelectric pyrometer, the imaging performance of the photoelectric pyrometer can be improved effectively, and the temperature measurement accuracy can be improved. In this paper, the temperature measurement principle of photoelectric pyrometer, the working principle of the detection optical system and the composition of the system are introduced. The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed. The optical pyrometer detection optical system is simulated by ZEMAX software, based on the analysis results, the Modulation Transfer Function (MTF) and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system. The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.     

适用于北斗混合星座的相对定位随机模型建模策略

为提高模糊度解算成功率和基线解精度,提出适用于北斗的相对定位随机模型建模策略,即混合随机建模策略。采用最小二乘方差分量估计方法对北斗单差观测量方差进行估计。对处于不同高度的三轨道卫星观测量方差分别建模:对地球静止轨道卫星观测量方差采用载噪比模型建模,对倾斜地球同步轨道卫星和中地球轨道卫星观测量方差均采用仰角模型建模。根据不同模型实时组建观测量的随机模型。试验结果表明:相比于采用传统简化模型和单一的仰角或载噪比模型,混合随机模型能更加真实地反映不同卫星观测量的随机噪声特性,模糊度解算成功率和相对定位精度均有提高,总体性能最优,因而能更好地适用于北斗系统。