含内置式耐压液舱舱段耐压船体结构应力分析

为研究静压下内置式耐压液舱结构的力学规律,采用有限元方法对内置式耐压液舱及船体结构进行强度计算,分析了不同工况下耐压壳的变形和应力特征,比较了不同区域耐压壳的应力情况。结果表明:液舱内外相连通时的工况更危险,耐压壳应力水平也更高。同时,内置式耐压液舱的存在使液舱底部耐压壳的应力水平高于耐压壳其他区域。该研究结果可为内置式耐压液舱结构设计提供指导。     

特种防护舱抗爆性能试验研究

为探讨特种防护舱抗爆性能,进行了舱内爆炸原型试验,研究不同装药量下开闭盖状态防护舱内爆炸时的空气冲击波超压和舱体位移过程。结果表明:同药量下闭盖状态的空气冲击波超压明显高于开盖状态,即封闭舱内偶然爆炸时空气冲击波超压更高;随装药量的增大,舱壁的空气冲击波超压也在增大;舱体侧壁经过多次正反射作用均未发生碎片反应,顶盖泄爆措施对降低底板的空气冲击波超压十分有利;距爆心较近处的位移均比距爆心较远处的位移大。原型试验舱体完全破坏,但结构未发生崩溃式破坏,并无碎片及内爆的二次破片飞出,舱体具有一定的抗爆性能和较好的防破片能力。     

A bayesian optimisation methodology for the inverse derivation of viscoplasticity model constants in high strain-rate simulations

We present an inverse methodology for deriving viscoplasticity constitutive model parameters for use in explicit finite element simulations of dynamic processes using functional experiments, i.e., those which provide value beyond that of constitutive model development. The developed methodology utilises Bayesian optimisation to minimise the error between experimental measurements and numerical simulations performed in LS-DYNA. We demonstrate the optimisation methodology using high hardness armour steels across three types of experiments that induce a wide range of loading conditions: ballistic penetration, rod-on-anvil, and near-field blast deformation. By utilising such a broad range of conditions for the optimisation, the resulting constitutive model parameters are generalised, i.e., applicable across the range of loading conditions encompassed the by those experiments (e.g., stress states, plastic strain magnitudes, strain rates, etc.). Model constants identified using this methodology are demonstrated to provide a generalisable model with superior predictive accuracy than those derived from conventional mechanical characterisation experiments or optimised from a single experimental condition.     

Data-driven prediction of plate velocities and plate deformation of explosive reactive armor

Explosive reactive armor (ERA) is currently being actively developed as a protective system for mobile devices against ballistic threats such as kinetic energy penetrators and shaped-charge jets. Considering mobility, the aim is to design a protection system with a minimal amount of required mass. The efficiency of an ERA is sensitive to the impact position and the timing of the detonation. Therefore, different designs have to be tested for several impact scenarios to identify the best design. Since analytical models are not predicting the behavior of the ERA accurately enough and experiments, as well as numerical simulations, are too time-consuming, a data-driven model to estimate the displacements and deformation of plates of an ERA system is proposed here. The ground truth for the artificial neural network (ANN) is numerical simulation results that are validated with experiments. The ANN approximates the plate positions for different materials, plate sizes, and detonation point positions with sufficient accuracy in real-time. In a future investigation, the results from the model can be used to estimate the interaction of the ERA with a given threat. Then, a measure for the effectiveness of an ERA can be calculated. Finally, an optimal ERA can be designed and analyzed for any possible impact scenario in negligible time.     

燃汽轮机作为坦克动力的现状与分析

阐述了美国、俄罗斯应用燃汽轮机作为坦克动力的现状。假设将俄罗斯ГТД-1250燃汽轮机及其传动装置装入国产某型坦克动力舱,通过对发动机牵引力和燃油消耗量的计算,并与原型坦克进行对比分析,结果表明：燃汽轮机作为坦克动力在性能上能够满足使用要求。     

车辆典型部件结构的有限元模型修正方法

以车身结构中简化的典型结构形式为研究对象,利用有限元软件中的焊点模拟单元,建立典型结构的有限元模型并进行模态分析。在参数灵敏度分析的基础上,结合模态试验测得的数据,利用广义简约梯度算法,对结构的有限元模型进行修正和模型验证,深入探讨了车辆典型部件结构的有限元模型修正方法。通过模型修正,有限元模型的精度得到了明显的提高,为进一步研究车辆结构部件的振动特性奠定了基础。     

驱动线圈极性排列方式对多级同步感应线圈发射器加速性能的影响

为提高多级同步感应线圈发射器的加速性能,以5级同步感应线圈发射器为例,在定义驱动线圈极性相对排列方式的基础上,基于场-路耦合的时步有限元分析方法,研究了驱动线圈极性排列方式对其加速性能的影响,结果表明:驱动线圈同极性相对排列方式更有助于提高发射效率。通过分析内部磁场的分布规律,探讨了驱动线圈同极性相对排列方式改善加速性能的原因,最后通过比较电枢内的感应电流密度的方法验证了分析的正确性。     

倾斜微型桩桩身参数敏感性有限元分析

基于有限元强度折减法,结合工程实例,利用软件ANSYS对不同倾角微型桩加固边坡以及倾斜微型桩的设桩位置、锚固深度和桩排距等桩身参数对边坡稳定性的影响进行了数值模拟分析。结果表明:微型桩加固边坡较优的倾斜角度为60°;随着设桩位置离坡顶距离的增加,边坡的稳定系数先增大后减小,当设桩位置距坡顶的相对位置为0.58~0.66,边坡的稳定系数较高;当桩排距为9倍桩径,边坡的稳定系数较高。研究结果为倾斜微型桩的设计与工程应用提供了理论依据,具有一定的普遍意义。     

基于多 Agent 系统的分队对抗建模仿真

使用基于多Agent系统的建模方法对分队对抗进行了“自底向上”地建模;建立了战场的模型,并从属性、行为、规则三方面建立了智能兵力Agent模型;基于多Agent仿真平台——NetLogo,构建了仿真系统,通过对Agent“微观”行为的仿真,获得了群体的“宏观”行为,为战争复杂系统仿真研究提供了参考。     

Specialization in defence forces

The choice between balanced and specialized defence forces depends on the technology of defence output (e.g. whether a force scope multiplier is present), the existence of scope and scale economies, the platform customization costs and, of course, the level of defence budgets. Minimum force element levels (thresholds), and scale economies facilitate specialization as opposed to scope economies (e.g. platform‐sharing), scale diseconomies and the force scope multiplier (e.g. defence weakest‐link technology). When a balanced force is not optimal, the option value of a non‐optimally maintained force element must also include the opportunity cost arising from suboptimal force elements. Shrinking defence budgets may produce two surprising phenomena. If some force elements are shut down as a result of thresholds, the surviving ones may increase in platform numbers as well as enjoying closer‐to‐most‐desirable platforms. Furthermore, if heritage force elements are shut down within the budget contraction environment, overall defence capability might rise.