火炮火控系统命中解的分布和存在性

定义了火控系统中问题联立方程应满足的“基本假设”,从理论上讨论了在“基本假设”条件下诸命中解的分布特性 ,证明临近的命中解 (如果存在的话 )是唯一的 ,给出了临近解存在的充分必要条件。用一个简单的实例表出不同目标速度下诸命中解分布的实验数据     

红外传感器目标跟踪算法

对红外传感器目标跟踪进行了系统的阐述 ,包括航迹起始、已知目标强度分布模型时的红外目标跟踪 ,对目标质心伪测量的红外目标跟踪 ,基于质心及质心偏移测量的红外目标跟踪 ,红外传感器的目标机动检测、利用图像分割和目标特征的红外目标跟踪 ,图像相关算法和 Kalman滤波的红外目标跟踪 ,简化充分统计量的红外目标跟踪 ,修正球坐标系 (MSC)的红外目标跟踪、利用主客观知识的红外跟踪 ,红外传感器的微弱信号检测与跟踪以及红外传感器检测 -跟踪的联合优化等研究具有一定的参考意义     

Response surface analysis of two‐stage stochastic linear programming with recourse

We apply the techniques of response surface methodology (RSM) to approximate the objective function of a two‐stage stochastic linear program with recourse. In particular, the objective function is estimated, in the region of optimality, by a quadratic function of the first‐stage decision variables. The resulting response surface can provide valuable modeling insight, such as directions of minimum and maximum sensitivity to changes in the first‐stage variables. Latin hypercube (LH) sampling is applied to reduce the variance of the recourse function point estimates that are used to construct the response surface. Empirical results show the value of the LH method by comparing it with strategies based on independent random numbers, common random numbers, and the Schruben‐Margolin assignment rule. In addition, variance reduction with LH sampling can be guaranteed for an important class of two‐stage problems which includes the classical capacity expansion model. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 753–776, 1999     

远程预警声呐发现目标后的机动原则

鉴于经典的载体优化理论对装备舷侧阵声呐的潜艇的局限性,讨论了装备舷侧阵远程预警声呐的潜艇发现目标后的机动问题.在分析经典的载体优化机动理论的使用条件和特点的前提下,借鉴美国潜艇拖曳阵远程预警声呐发现目标后的战术机动思想,提出了装备舷侧阵声呐的潜艇发现目标后可以采取与初始发现方位线相垂直的倒"U"字机动策略及具体的细节.该机动方法理论上成立,但具体参数的确定还需要经过计算机仿真和海上实践的检验.同时认为战术理论的发展与装备技术水平的发展紧密相关.     

自适应交互多模型算法在机动目标跟踪中的应用

针对多模型算法在机动目标跟踪中存在的问题,运用交互多模型算法(IMM)和自适应滤波理论,设计了一种自适应交互多模型算法(AIMM),结合目标运动模型对目标当前加速度和其方差进行估计,并在此基础上给出了AIMM中模型集和模型转移概率的设计方法,进行了计算机仿真.蒙特卡罗仿真结果表明,与标准IMM算法相比,该算法比IMM算法的跟踪性能有很大提高,跟踪复杂机动目标比IMM有更快的收敛速度,跟踪滞后问题得到较好的解决,跟踪目标的稳定性和精确性均优于IMM算法,有利于机动目标的实时跟踪.     

频域加权LQR控制器改进设计

基于线性二次型调节器(Linear Quadratic Regulator,LQR)控制方法,设计一种频域加权LQR控制器;通过对其常用滤波器进行改进,提出一种新型滤波器设计思路.当振源频率低于执行器下限响应频率,导致执行器输出减小时,通过改变滤波器参数、增大低频部分权重及控制力,可提高低于执行器响应下限频段的控制性能...     

美军飞机易损性实弹测试现状及启示

飞机易损性分析与评估是指对飞机在战斗状态下遭受攻击后受损的难易程度的评价,是衡量飞机战斗性能的重要指标.研究飞机易损性对于飞机高生存力设计和飞机战伤预测评估具有重要意义.本文首先简要介绍了飞机易损性分析的一般方法与流程,收集并整理了美军飞机易损性实弹测试的历史沿革和条件建设现状,同时以F-35整机、F135发动机和C2...     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.     

Responses of HFR-LWC beams under close-range blast loadings accompanying membrane action

The load-carrying capacities and failure patterns of reinforced concrete components can be significantly changed by membrane effects. However, limited work has been carried out to investigate the blast resistance of Hybrid Fiber Reinforced Lightweight Aggregate Concrete (HFR-LWC) members accompanying membrane action. This paper presents a theoretical approach to quantitatively depicting the membrane behavior and its contribution on the behavior of HFR-LWC beams under close-range blast loadings, and the suitability of the proposed model is validated by a series of field tests. An improved Single-Degree-of-Freedom (SDOF) model was employed to describe the dynamic responses of beam-like members under blast loadings accompanying membrane action, where the mass-load coefficient is determined according to the nonuniformly distributed load induced by close-range explosion, and the membrane action is characterized by an in-plane (longitudinal) force and a resisting moment. The elasto-plastic and recovery responses of HFR-LWC beams under the combined action of blast load and membrane force were analyzed by the promoted model. A specially built end-constrain clamp was developed to provide membrane action for the beam member when they are subjected to blast load simultaneously. It is demonstrated that the analytical displacement-time histories are in good agreement with experimental results before peak deflections and that the improved SDOF model is an acceptable tool for predicting the behavior of HFR-LWC beams under blast loadings accompanying membrane action.     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.