次级通道估计误差对Fx-Newton算法的影响

Fx-Newton算法在执行过程中需要估计次级通道模型,针对主被动隔振工程应用中次级通道估计存在误差的问题,假设输入信号为正弦信号,建立含次级通道估计误差的Fx-Newton算法结构模型,推导了Fx-Newton算法的稳定性条件,并就相位误差和幅值误差对Fx-Newton算法稳定性和收敛性的影响做了详细阐述。最后对两自由度主被动隔振模型开展仿真研究,验证了理论分析结果。     

面向作战任务的最小风险传感器调度方法

基于风险理论提出一种面向不同目标探测任务的传感器调度方法。将主动传感器辐射被截获风险和目标探测风险结合起来,建立一般目标探测框架下的传感器最小风险调度模型。分目标跟踪、目标识别和目标威胁等级评估三种情况将传感器最小风险调度模型具体化,给出不同情况下目标探测风险值的计算方法。针对模型的求解提出一种基于混沌思想、反向学习和双向轮盘赌的改进人工蜂群算法。通过仿真实验证明了模型的可行性和算法的有效性。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Military Off the Shelf Procurements: A Norwegian Case Study

Buying off the shelf procurements (OTS) has become an important part of the national acquisition strategy in several countries, and this paper seeks to bring empirical evidence on OTS as the preferred acquisition strategy by use of data from 2015 to 2022 investment portfolio of the Norwegian Armed Forces. We develop definitions for three categories of procurement – OTS, modified OTS and development projects – as well as a method to classify projects into these categories. Our first finding is that the characteristics of OTS projects correspond to modified OTS and development projects. Our second finding indicates that OTS projects perform better when it comes to the completion of projects according to the initial schedule, compared to development projects.     

非均匀湍流场中螺旋桨噪声研究

针对螺旋桨在湍流中的非定常噪声问题,在均匀湍流下螺旋桨宽频噪声相关性法的基础上,推导了非均匀湍流下螺旋桨宽频噪声的公式。在均匀湍流的研究中使用了十桨叶螺旋桨模型,并将计算结果与试验数据进行了对比,发现吻合较好。对于非均匀湍流中的问题,研究发现湍流的不均匀程度不会对宽频谱波峰的位置产生影响,噪声谱波峰的位置仍然取决于叶频,湍流的不均匀程度只会改变叶频处的波峰高度。最后研究了均匀湍流和非均匀湍流中侧斜角对螺旋桨噪声的影响,发现桨叶侧斜角的存在会降低螺旋桨在湍流中受到的宽频噪声。     

目标宽频带RCS的快速算法研究

目标宽带RCS预估算法一直是计算电磁学的一个研究热点,本文分别研究了渐近波形估计技术（AWE）与最佳一致逼近技术在宽频带RCS预估领域内的应用。首先,介绍了传统矩量法计算RCS的原理,并分析了两种快速算法的计算过程。然后,采用这两种技术,分别计算了简易飞机模型的RCS值,并对这两种方法进行比较。计算结果表明相比传统的矩量法,这两种方法在不影响精度的前提下大大提高了计算效率。同时,相比渐近波形估计技术,最佳一致逼近技术在节省内存,节约时间方面更具优势。最后,采用最佳一致逼近理论,结合电磁计算软件,实现较大尺寸目标的宽频带RCS的计算。     

北斗系统新民用导航电文历书参数算法与性能分析

研究新公布的北斗民用导航电文中的两类历书与北斗二号导航电文历书的差异,对比分析各类历书对接收机首次定位时间的影响。利用实际的历书数据,比较不同历书类型的用户算法,分析不同龄期数据对接收机首次定位性能的影响。结果表明,高精度历书在1周的数据龄期内性能较为稳定,中等精度历书精度稍逊于高精度历书,但由于简化了电文空间,能接近高精度历书性能。简约历书进一步简化了参数数目和电文空间,尽管位置误差达到了数百千米,但却能在数月之后保持相应精度,有利于缩短接收机首次定位时间。     

卫星导航信号无模糊抗多径码相关参考波形设计技术

针对目前卫星导航接收机码环多径抑制技术在二进制偏移副载波类信号下鉴别曲线可能出现多个稳定跟踪位置,导致接收机存在伪距测量的系统性误差的问题,提出最优鉴别曲线设计技术,采用奇异值优化的最小二乘方法,设计无多余跟踪点的本地码相关参考波形。从多径误差包络和跟踪精度两方面,对基于最优鉴别曲线的二进制偏移副载波信号码相关参考波形的设计性能进行验证评估。仿真结果表明：该方法可实现二进制偏移副载波信号在有限接收带宽下的无模糊鉴别曲线设计。以前端带宽为8.184 MHz时的BOC(1,1)信号为例,设计的码相关参考波形相比W2波形,多径误差包络面积增加了61.8%,而跟踪精度提高了4~5 dB。     

基于多视角的装备体系军事需求开发框架模型

装备体系军事需求开发框架模型为装备体系军事需求的开发提供了指导和规则.考虑到军事装备体系自身的体系复杂性和参与军事需求开发的人员多样性,为了能综合反映出各个角度上的需求,应用多视角方法首先对装备体系军事需求进行了分析,然后基于该方法构建了军事需求开发框架模型,进而分析了装备体系军事需求体系,最后以示例来说明该框架模型的实用性.     

铝导线短路熔珠对固体可燃物引燃能力实验研究

在模拟试验平台上进行了铝导线短路熔珠引燃棉布、聚氨酯泡沫塑料和纸张的试验,得到了不同材料的临界加栽电压值和引燃规律。初步分析了加栽电压与短路熔珠粒径及引燃能力的关系。结果表明,随着短路电压增大,导线熔珠的粒径逐渐增大,熔珠对固体材料的引燃能力逐渐增强,氧指数越低、表面粗糙、易蓄热的材料越容易被点燃。棉布、聚氨酯泡沫塑料和纸屑被引燃的短路临界电压分别为50V、35V和45V。