故障类别的模糊聚类分析

本文通过故障状态-特征的模糊聚类分析,按故障间的相似性对故障进行分类,然后按类别实施故障诊断,可在最少监测点的条件下,获得最多的设备运行故障信息。从而简化故障诊断过程,提高诊断速度和精度。     

身管内弹道性能改变量的静态标定研究

目前国内外静态标定火炮身管内弹道性能改变量的方法,都存在着原理和精度不高的缺陷。采用多特征截面的标定方法可取得满意的精度,本文论述了其理论基础、精度及应用领域。     

浅析炮车比

本文以坦克发射时车体的角振幅和乘员所受加速度不超过一定值为基础,推导了炮车比极限值的理论公式;并对影响炮车比极值的因素进行了分析,最后,以59式坦克为例得出炮车比不超过1.71,该结论具有普遍意义.     

A nonparametric Bayes approach to decide system burn-in time

Burn-in is the preconditioning of assemblies and the accelerated power-on tests performed on equipment subject to temperature, vibration, voltage, radiation, load, corrosion, and humidity. Burn-in techniques are widely applied to integrated circuits (IC) to enhance the component and system reliability. However, reliability prediction by burn-in at the component level, such as the one using the military (e.g., MIL-STD-280A, 756B, 217E [23–25]) and the industrial standards (e.g., the JEDEC standards), is usually not consistent with the field observations. Here, we propose system burn-in, which can remove many of the residual defects left from component and subsystem burn-in (Chien and Kuo [6]). A nonparametric model is considered because 1) the system configuration is usually very complicated, 2) the components in the system have different failure mechanisms, and 3) there is no good model for modeling incompatibility among components and subsystems (Chien and Kuo [5]; Kuo [16]). Since the cost of testing a system is high and, thus, only small samples are available, a Bayesian nonparametric approach is proposed to determine the system burn-in time. A case study using the proposed approach on MCM ASIC's shows that our model can be applied in the cases where 1) the tests and the samples are expensive, and 2) the records of previous generation of the products can provide information on the failure rate of the system under investigation. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 655–671, 1997     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

On lifetimes in random environments

For a component operating in random environment, whose hazard rate is assumed to be the realization of a suitable increasing stochastic process, conditions are found such that its lifetime is increasing in likelihood ratio (ILR). For the lifetimes of two components of the same kind some comparisons based on partial stochastic orders are presented. Some applications to the case of repairable components are finally provided. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 365–375, 1998     

Attrition models of the Ardennes campaign

This paper revisits the modeling by Bracken [3] of the Ardennes campaign of World War II using the Lanchester equations. It revises and extends that analysis in a number of ways: (1) It more accurately fits the model parameters using linear regression; (2) it considers the data from the entire campaign; and (3) it adds in air sortie data. In contrast to previous results, it concludes by showing that neither the Lanchester linear or Lanchester square laws fit the data. A new form of the Lanchester equations emerges with a physical interpretation. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 1–22, 1998     

超高斯随机振动环境的疲劳强化机理

针对可靠性强化试验的全轴随机振动环境的超高斯幅值分布特性开展其疲劳强化机理研究。首先通过理论分析表明RS机振动激励下试件应力仍保持超高斯分布,然后证明了同等量级下的超高斯分布比高斯分布随机应力具有更高的疲劳强化效能,从而揭示RS机全轴随机振动环境超高斯幅值分布特性的疲劳强化机理。     

机载MIMO雷达稳健非均匀样本选择方法

针对杂波训练样本中混入干扰目标,导致空时自适应处理技术的杂波抑制性能下降问题,提出一种基于目标知识进行局部稀疏恢复的稳健训练样本挑选方法。该方法利用先验知识确定待检测单元中的目标区域,对整个角度-多普勒平面进行遍历,获得稀疏超完备基。通过变换矩阵对超完备基中对应的目标区域进行"挖空"处理,局部稀疏恢复出超分辨的杂波空时谱,获得杂波协方差矩阵估计。结合广义内积算法,实现非均匀训练样本挑选的过程。与常规结合广义内积方法相比,该方法对于不同干扰强度的训练样本,均有良好的检测效果。经仿真验证,所提方法的检验统计量之间区分度更加明显,对于干扰样本的挑选更加彻底,从而有效地提高了空时自适应处理技术的目标检测性能。     

美军“多域战”概念探析

"多域战"概念由美陆军率先提出,是美军在联合作战概念上的又一次创新。"多域战"是美陆军力图拓展多领域作战能力、美军反制"反介入/区域拒止"威胁和打造在未来高强度对抗战争中的新优势的有力手段。"多域战"概念具有作战领域多维扩展、要素体系高度融合、指挥体制扁平灵活、军队编制精简多能和技术装备革新整合的特点。近年来,美军不断推动"多域战"的完善,为其发展提供了理论支撑、科技支撑、实践支撑和智力支撑。美军"多域战"概念的实施前景挑战与机遇并存。