动态液-液旋流分离器油滴运动轨迹模拟

针对动态液-液旋流分离器油、水两相过程,从流体力学基本方程出发,采用雷诺应力模型、QUICK差分格式和SIMPLE算法模拟分析动态液-液旋流分离器内的流场;并以此为基础,采用离散相模型和多相流模型,模拟油、水两相分离过程和油滴运动轨迹.模拟结果表明:油滴粒径决定其在旋流分离器中的运动轨迹、速度及分离特性,大粒径油滴更易于向中心聚集形成油芯,油芯的形状与油滴的大小直接相关;动态液-液旋流分离器的主要分离过程在转筒内完成,油相分离效率随着油滴粒径的增大而提高.     

海拔高度对发动机泵机组性能的影响

介绍250型泵机组基本参数,详细阐述该型发动机泵机组的动力传递关系,应用FST2E型测试台架开展泵机组发动机高原效能模拟试验,获取发动机在不同海拔高度的功率、燃油消耗率和油耗量数据,拟合生成发动机负荷特性曲线。定量分析不同海拔高度发动机功率下降对离心泵体积流量、效率、扬程等的影响,得出泵机组体积流量、扬程、效率的下降规律。研究结果可为现有泵机组的使用及新型泵机组的研制提供理论依据和数据参考。     

Scheduling research and the first decade of NRLQ: A historical perspective

It is generally recognized that the first model involving job scheduling was presented by Selmer Johnson and published in the inaugural issue of Naval Research Logistics Quarterly (NRLQ) in 1954. NRLQ also published another seminal scheduling paper by Wayne E. Smith a short time later. In the present paper, we discuss the contribution of NRLQ and the role of the Office of Naval Research in the development of the scheduling literature during the first decade (1954–1963). We also provide a critical analysis of the papers by Johnson and Smith. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 335–344, 2015     

On equivalence between the proportionate flow shop and single‐machine scheduling problems

We derive sufficient conditions which, when satisfied, guarantee that an optimal solution for a single‐machine scheduling problem is also optimal for the corresponding proportionate flow shop scheduling problem. We then utilize these sufficient conditions to show the solvability in polynomial time of numerous proportionate flow shop scheduling problems with fixed job processing times, position‐dependent job processing times, controllable job processing times, and also problems with job rejection. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 595–603, 2015     

某型柴油机进气道通流特性试验研究

分析了某型柴油机气缸盖进气道流量系数和涡流比随气阀升程的变化规律,以及进气道前后的压差对流量系数和涡流比的影响.试验结果表明,该型柴油机进气系统在低负荷时可以实现较大的涡流比,从而可以改善柴油机低负荷性能.     

动态多因子相关算法及其改进

以组网雷达情报综合处理为背景,针对多站多目标航迹相关问题,首先介绍了动态多因子相关算法的基本原理,然后在此基础上提出了几点改进措施。利用位置因子的重要性对相关判定区域做了限制;利用航向因子对判决结果进行二次修正,同时结合目标的机动检测问题,提高了对目标强机动的检测能力;此外,根据实验结果还对综合处理中的航迹配对准则进行了修正。通过算法的改进不仅改善了航迹相关的质量,还降低了运算量。最后给出了改进后的算法流程图。     

基于自由边控制流图的路径覆盖分析实现方法

针对路径覆盖测试,给出了一般循环结构的一种简化处理方案及把按此方案得到的控制流图转化为自由边控制流图方法,并探讨了基于自由边控制流图进行路径覆盖分析的实现方法和优点。     

激光制导航空炸弹三维动态数字仿真研究

以某型激光制导航空炸弹为例,进行了三维动态数字仿真研究,文中建立了该型激光制导炸弹六自由度空间运动方程和双通道控制系统模型。通过仿真计算,得到了该弹的三维攻击区,并将三维动画技术应用于实时仿真系统的软件开发中     

Effect of tongue clearance on hydraulic performance of double support vortex pump

In order to study influence of tongue clearance on the hydraulic performance of double support vortex pump, three dimensional flow model with symmetric variable size tongue clearance was established by changing section parameter of tongue clearance, and applied to numerically simulate the steady inner flow in a vortex pump based on fixed working conditions and impeller through ANSYS FLUENT. The numerical results show the influence of tongue channel with two sections (non-uniform and uniform sections) on flow field characteristics in vortex pump. Firstly, the variation of tongue channel section changes the vortex structure distribution in circumferential flow channel. Specifically the spiral forward vortex structure in the circumferential direction shifts to large radius side with increasing tongue width. Secondly, the circumferential velocity gradient and axial pressure gradient both diminish with the increase of the tongue section, and the inlet/outlet pressure difference and velocity distribution also reduce with increasing tongue channel section. Finally, for vortex pump with non-uniform section of tongue channel, the head diminishes and the efficiency remains constant approximately with the increase of the tongue width, while the head and the efficiency both diminish for uniform section of tongue channel.     

多孔介质中气体流量对流动阻力影响的实验研究

对空气在多孔介质(Pd/SiO2颗粒催化剂)中的流动阻力特性进行了冷态实验,研究了气体流量对流动阻力的影响.结果表明:催化剂厚度一定时,随着气体流量增大,多孔介质中的流动阻力也逐渐增大.经过与经典阻力计算公式对比,分析了偏差影响因素.最后,结合实验数据拟合出了适合管式反应器中流动阻力计算的半经验公式,能精确地预测颗粒填...