带横向射流的绕后台阶超音速外流场的数值模拟

将一股射流喷入超音速外流是飞行器飞行控制的常用方法。本文通过应用MacCormack 显格式和Ba(?)dwin-Lomax 代数湍流模型求解二维可压缩的RANS 方程,对带横向射流的绕后台阶的超音速外流场进行了数值模拟,并给出了流场的速度向量图、等压线图和等马赫线图。与无喷射的情形相比,台阶底部压力增加了一倍左右。     

最小、最大广义最优停止规则的特征

设(X_n,F_n)_1~∞是适应的报酬序列,(γ_n)是相应的snell 包,(A_n)是(γ_n)的Doob-Meyer 分解中零初值的可料增过程。本文继J.Klass 的研究证明了σ_1=inf{K≥1:X_k≥γ_k}是最小半最优的且是最大严格正则的广义规则,而K_0=sup{n≥0:A_n=0}<∞是最大正则的广义规则,从而得出了广义最优规则唯一性的另一表述。     

An exact analysis of a joint production‐inventory problem in two‐echelon inventory systems

We consider a two‐echelon inventory system with a manufacturer operating from a warehouse supplying multiple distribution centers (DCs) that satisfy the demand originating from multiple sources. The manufacturer has a finite production capacity and production times are stochastic. Demand from each source follows an independent Poisson process. We assume that the transportation times between the warehouse and DCs may be positive which may require keeping inventory at both the warehouse and DCs. Inventory in both echelons is managed using the base‐stock policy. Each demand source can procure the product from one or more DCs, each incurring a different fulfilment cost. The objective is to determine the optimal base‐stock levels at the warehouse and DCs as well as the assignment of the demand sources to the DCs so that the sum of inventory holding, backlog, and transportation costs is minimized. We obtain a simple equation for finding the optimal base‐stock level at each DC and an upper bound for the optimal base‐stock level at the warehouse. We demonstrate several managerial insights including that the demand from each source is optimally fulfilled entirely from a single distribution center, and as the system's utilization approaches 1, the optimal base‐stock level increases in the transportation time at a rate equal to the demand rate arriving at the DC. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Inventory management with advance capacity information

An important aspect of supply chain management is dealing with demand and supply uncertainty. The uncertainty of future supply can be reduced if a company is able to obtain advance capacity information (ACI) about future supply/production capacity availability from its supplier. We address a periodic‐review inventory system under stochastic demand and stochastic limited supply, for which ACI is available. We show that the optimal ordering policy is a state‐dependent base‐stock policy characterized by a base‐stock level that is a function of ACI. We establish a link with inventory models that use advance demand information (ADI) by developing a capacitated inventory system with ADI, and we show that equivalence can only be set under a very specific and restrictive assumption, implying that ADI insights will not necessarily hold in the ACI environment. Our numerical results reveal several managerial insights. In particular, we show that ACI is most beneficial when there is sufficient flexibility to react to anticipated demand and supply capacity mismatches. Further, most of the benefits can be achieved with only limited future visibility. We also show that the system parameters affecting the value of ACI interact in a complex way and therefore need to be considered in an integrated manner. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于触摸屏的双手交互指挥技术应用研究

在未来指挥所中为降低指挥员认知负担、提升指挥效率,采用新型的双手交互指挥技术把指挥员的日常操作技能自然地映射到人机对话中,提高交互带宽.研究基于红外光感应的多点触摸手指识别与定位技术,分析双手触摸式自然交互技术及双手触摸式自然操作的状态模型,建立双手交互通用流程并设计实现了触摸式指挥研讨系统,把这些研究成果应用于一个指...     

面向重用的BOM概念模型相似度评估研究

针对BOM概念模型重用的问题,提出了概念模型相似度用于描述两个概念模型之间的相似程度.并提出相似度评估算法用于计算概念模型之间的相似度.根据概念模型的定义,将相似度的计算归结为名字相似度计算和最优匹配计算两个基本过程.研究了算法中接口权重参数和行为权重参数的不同组合对算法查准率和查全率的影响.通过对JC3IEDM数据模...     

ARCPI辅助谐振电路优化控制

结合交流全电坦克炮控系统研究的一种三相软开关逆变器——辅助谐振换流极逆变器(Auxiliary Resonant Commutated Pole Inverter,ARCPI)的工作原理,提出了一种辅助谐振电路优化控制方法.采用这种方法,在保证三相逆变器主开关管零电压关断的前提下,可以使辅助开关管的工作次数减少一半,进...     

基于Linux/QT的火控系统实时故障诊断方法

针对某数字化火控系统实时故障检测与诊断问题,提出了一种基于对象式框架知识表示的火控系统实时故障诊断方法。该方法采用专家系统与实时进程通信,获取故障征兆,进行实时推理定位故障源。给出了诊断系统的一般架构,介绍故障诊断系统知识表示的形式化描述,实时推理、规则匹配算法和UDP进程通信协议。实际应用证明了这种方法的有效性和可扩展性。     

基于Digital UNIX平台的实时数字引导实现方法

根据导弹飞行试验任务中对测控设备进行数字引导的实际需求,介绍了数字引导在飞行试验任务中的作用和基于Digital UNIX平台实现对测控设备数字引导的原理,从确保数字引导实时性、引导数据可靠性、引导外推点确定及修正引导方法四个方面介绍实现数字引导的关键技术,为导弹飞行试验任务中确保测量设备及时捕获和跟踪目标,成功地实现数字引导提供了实用的实现方法。     

超细粉体颗粒表面改性研究进展

概述了超细粉体颗粒表面改性的重要性、团聚原因和表面改性的作用,重点阐述了不同的表面处理方法及粒子与多种改性剂之间的相互作用机理,指出了超细粉体颗粒改性的目的在于通过降低粒子的表面能和改变粒子的表面极性,减少粒子间的团聚,促进超细粉体粒子的分散。