建筑消防设计中疏散时间的确定方法

本文针对建筑消防设计中疏散时间计算这一关键问题 ,利用疏散行为指数确定生活不能自理的人的疏散能力 ,进而确定其疏散时间 ,为建筑消防安全设计和防火管理工作提供理论依据。文中介绍的方法、计算公式及步骤简捷 ,具有一定的实用价值。     

椭圆弹道射程角和飞行时间公式的一种推导方法

本文利用椭圆弹道长轴方向有一常量的性质,计算了被动段弹道的射程和飞行时间。     

测量TOA和DOA的单站无源定位跟踪可观测条件

单站无源定位跟踪技术中,可观测性分析是一个关键问题,但是由于TOA测量方程的非线性程度太高,直接通过计算Jacobin矩阵得到的可观测矩阵形式非常复杂,很难得出明确的分析结果。采用新的思路推导了一种TOA测量方程的线性化方程,分析了测量TOA和DOA单站无源定位的可观测条件。最后给出了计算机仿真结果。     

Local search methods for the discrete time/resource trade-off problem in project networks

In this paper we consider the discrete time/resource trade-off problem in project networks. Given a project network consisting of nodes (activities) and arcs (technological precedence relations), in which the duration of the activities is a discrete, nonincreasing function of the amount of a single renewable resource committed to it, the discrete time/resource trade-off problem minimizes the project makespan subject to precedence constraints and a single renewable resource constraint. For each activity, a work content is specified such that all execution modes (duration/resource requirement pairs) for performing the activity are allowed as long as the product of the duration and the resource requirement is at least as large as the specified work content. We present a tabu search procedure which is based on a decomposition of the problem into a mode assignment phase and a resource-constrained project scheduling phase with fixed mode assignments. Extensive computational experience, including a comparison with other local search methods, is reported. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 553–578, 1998     

Determining a threshold control policy for an imperfect production system with rework jobs

Consider a threshold control policy for an imperfect production system with only a work center handling both regular and rework jobs. An imperfect production system studied here, generates defect jobs by factors other than machine failures. A threshold control or (ω, s) policy sets the guideline for a work center to switch between regular and rework jobs. A production cycle begins with loading and processing of several batches of regular jobs with a lot size equal to s. The outcome of each completed regular job is an independent Bernoulli trial with three possibilities: good, rework, or scrap. Once the work center accumulates more than a threshold ω of rework jobs, it finishes the last batch of regular jobs and switches to rework jobs. The objective of this research is to find a threshold ω and a lot size s that maximize the average long‐term profit. The ultimate goal is to construct a simple algorithm to search for ω and s that can be implemented directly in production management systems, as a result of this work. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 273–301, 1999     

通用计算机实时仿真技术

通用计算机由于各种相互兼容的标准硬件及丰富的应用软件支持而获得了广泛的应用,但通用计算机往往运行多任务的操作系统,这种通用操作系统一般不能满足半实物仿真的实时性要求。讨论了通用计算机半实物仿真的实时时钟获取方法,重点研究了通用操作系统的帧时间不稳定问题。提出了保证实时仿真帧时间的几种方法,并建立了一个具体的通用仿真计算机系统。试验结果表明,基于通用计算机的实时仿真是可行的。     

基于PIC系列单片机的迫弹电子时间引信控制系统设计

介绍了迫弹电子时间引信控制系统的电路组成、工作原理及其功能,并以PIC16F873A型单片机作为控制器核心,对引信的工作过程进行控制,提高了引信的安全性和可靠性。     

Machine scheduling with pickup and delivery

The coordination of production, supply, and distribution is an important issue in logistics and operations management. This paper develops and analyzes a single‐machine scheduling model that incorporates the scheduling of jobs and the pickup and delivery arrangements of the materials and finished jobs. In this model, there is a capacitated pickup and delivery vehicle that travels between the machine and the storage area, and the objective is to minimize the makespan of the schedule. The problem is strongly NP‐hard in general but is solvable in polynomial time when the job processing sequence is predetermined. An efficient heuristic is developed for the general problem. The effectiveness of the heuristic is studied both analytically and computationally. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

A model to predict the residual life of aircraft engines based upon oil analysis data

This paper reports on a study using the available oil monitoring information, such as the data obtained using the Spectrometric Oil Analysis Programme (SOAP), to predict the residual life of a set of aircraft engines. The relationship between oil monitoring information and the residual life is established using the concept of the proportional residual, which states that the predicted residual life may be proportional to the wear increment measured by the oil analysis programmes. Assuming such a relationship between wear and the residual life exists, we formulated a recursive prediction model for the item's residual life given measured oil monitoring information to date. A set of censored life data of 30 aircraft engines (right censored due to preventive overhaul) along with the history of their monitored metal concentration information are available to us. The metal concentration information includes many variables, such as Fe, Cu, Al, etc.; not all of them are useful, and some of them may be correlated. The principal component analysis (PCA) has been adopted to reduce the dimension of the original data set and to produce a new set of uncorrelated variables, which we shall use in the prediction model. The procedure associated with estimating model parameters is discussed. The model is fitted to the actual SOAP data from the aircraft engines, and the goodness‐of‐fit test has been carried out. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

一类非线性动力系统的时滞反馈分叉控制

对时滞控制作用下的参数激励van der Pol-Duffing方程进行了研究,着重研究了时滞参数对该类参数激励系统的1/2亚谐共振-主参数共振分叉响应控制。首先采用摄动法从理论上推导出时滞动力系统的分叉响应方程,再采用数值模拟的方法研究了时滞参数对系统分叉响应的影响。研究结果表明,适当选取时滞参数,不仅可以改变分叉响应曲线的拓扑形态,还可以平移分叉响应曲线,即使其分叉提前或滞后,还能同时满足这两种要求。