防空导弹总体设计方法的新发展——弹族化设计

研究了防空导弹一种新的总体设计思想———弹族化设计 ,论述了防空导弹弹族的设计与研制采用预先计划的产品改进P3 I(Pre PlannedProductImprovement)系统方法的必要性与有效性 ,通过对一个覆盖全空域、包含有 3种导弹的防空导弹弹族进行一体化优化设计 ,其结果证明了弹族化设计方法的可行性和优越性     

大气层内复合控制拦截弹切换时间的探讨

大气层内拦截弹采用空气动力与燃气动力的复合控制方式是当今世界防空导弹的发展方向之一。复合控制技术的分析研究是当前急需解决的重要问题。在考虑目标机动加速度大小、目标机动时刻以及目标角闪烁的条件下 ,确定了拦截弹的控制方式由空气动力切换到复合控制时的切换时间。     

DIS系统中实时通讯技术的研究

针对DIS系统实时通讯的要求 ,以UDP通讯协议为基础 ,结合采用多线程技术 ,给出了一种实时通讯方法 .经模拟试验表明该方法在WindowsNT环境下是有效的 .     

一种新的低阻弹弹道坐标数据的异常值判别方法

分析了弹道测试中误差产生的原因和类型,以及各种传统数据处理方法的不足之处,针对数据处理中的主要问题和难点,提出了一种新的判别异常值方法。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

SiC纤维表面CVD SiC涂层对其单丝强度的影响

采用化学气相沉积(CVD, Chemical Vapor Deposition)工艺在KD-I型SiC纤维表面制备了SiC涂层,选择2h、4h、6h和8h四个时间点研究了沉积时间对纤维性能的影响.结果表明:具有CVD SiC涂层的SiC纤维较无涂层的纤维来说强度有所下降;在所研究的沉积时间范围内,随着沉积时间的增加,涂层的厚度有所增加,涂层由不连续的岛状转变为连续层状,纤维的单丝强度出现了先升后降的趋势.     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

机动目标一维距离像RAT法线性化补偿

研究了机动目标宽带线性调频脉冲回波全去斜率信号模型,根据速度和加速度的调频频谱展宽特点,提出了机动目标宽带一维距离像线性化调频回波模型,给出了Radon模糊图转换(RAT)法线性参数估计与运动补偿方法,并进一步分析了测速和测距误差.仿真实验验证了RAT法一维距离像线性化参数估计与补偿,表明该方法很好地解决了运动参数未知情况下机动目标的一维距离像频谱展宽问题.     

一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.