舰船维修器材保障点选址决策模型及算法

传统的最大覆盖选址模型没有考虑对服务半径外的需求点的满足和服务时间的响应,而在舰船维修器材保障中,不论需求点到保障点的距离是否大于服务半径,都应对其进行保障服务,且在保障过程中要满足保障时间控制在不影响舰船正常维修任务时间内。针对此问题,运用广义最大覆盖选址模型和时间满意度函数,构建基于时间满意的广义最大覆盖选址模型,并运用一种混合算法———基于遗传模拟退火算法的BP算法对模型进行求解。最后,运用该算法对实例进行了分析计算,计算结果验证了该算法的有效性。     

基于有限元法的脉冲负载下高弹联轴器轴向力计算方法

以应用于脉冲柴油机发电机组中的高弹联轴器为研究对象,利用CATIA建立高弹联轴器的三维模型导入到Hyper Mesh中进行有限元网格划分,再将其有限元模型导入ANSYS中进行仿真分析,模拟其橡胶块在脉冲负载作用下的动态性能,对高弹联轴器在柴油机输出扭矩和脉冲负载同时作用时产生的轴向力进行仿真计算。结果表明:高弹联轴器在该工况下产生的轴向力较大,并且橡胶块在受交变应力作用时产生多应力集中点。仿真结果与Rivlin经典理论计算结果有较好的一致性,可为消磁舰船动力装置、消磁电站发电机组等场合下的弹性联轴器的选型设计提供参考。     

逆边界无网格法声源识别的理论与实验

针对逆向求解声源识别中的声辐射传输建模问题,采用无网格法将Kirchhoff- Helmholtz边界积分方程离散为受边界条件约束的有限维线性方程组,通过分块矩阵法对该约束方程组进行求解,得到了离散后声辐射传输模型的数值表达式.在此基础上,进一步研究了逆向求解声源识别问题的基本原理及其不适定性.为克服其不适定性,采用Tikhonov正则化和L曲线正则化参数选取方法,从而确立了有效的逆向求解方法.此外,还进行了扬声器阵列声源识别实验,实验结果验证了逆边界无网格声源识别理论和方法的可行性及可靠性.     

关于区域到区域映射的某些新结果

研究了指数函数、对数函数所构成的映射的映射特点;拓广了基本映射公式,提出了利用基本映射公式求区域到区域的映射。     

弹药集装单元储存静力学有限元分析

以简单的六面体结构为基础,以“铝板-聚氨酯泡沫材料-铝板”复合板材为弹药集装单元的主体材料,结合弹药集装单元的承载能力要求,建立弹药集装单元的基本模型。通过其在储存状态下的静力学有限元分析,了解3种不同堆垛情况下,弹药集装单元的应力与应变情况,为进一步研究弹药集装单元结构强度提供理论依据。     

基于RS近似算法的医疗诊断知识挖掘

针对医学领域诊断规则挖掘算法中时间和空间复杂性问题,提出一种基于邻域系统的决策表近似算法,用于医疗诊断数据挖掘预处理阶段的数据压缩.该方法以代表元素代替若干相近元素,有效地压缩了原始决策表的对象个数,同时保证决策表本身的判断能力基本不变.实例仿真表明,该算法具有比传统聚类算法更优的性能.     

多目标攻击导弹捷联惯导的传递对准

在分析中距复合制导空空导弹捷联惯导传递对准的基础上,提出由机载火控系统根据导弹发射包线计算发出开始捷联惯导传递对准精对准的时刻,导弹惯导提前进行传递精对准的方法。利用此方法可以解决机载武器系统多目标攻击空空导弹传递对准满足连续发射多枚导弹实时性要求的问题。最后,在单目标情况下就开始传递对准时刻包线给出了算例。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

机翼不对称损伤飞机在大侧滑角下的操稳特性研究

对某小型电动无人机(以下简称SEPUAV)在其左翼破损40%面积矩下的操稳特性进行详细分析。首先在此损伤下典型大侧滑角定常工作点附近进行特殊的小扰动线性化,然后进行特征根和飞行运动模态的分析;其次对此特殊构型SEPUAV进行操稳特性、时频响应特性进行分析。分析结果表明:左翼破损40%面积矩SEPUAV出现特有运动模态并影响全部纵侧向运动状态的响应;部分传递函数出现较多非最小相位零点从而导致初始响应发生反向;部分通道的Bode图中出现多个波峰波谷并有相角提前等现象。分析结果对后续容损飞行控制器的设计起到铺垫的作用。