无源雷达截获概率建模与窗口变量影响仿真

在截获概率概念和截获条件的基础上,综合时域、空域、频域等窗口函数构建截获概率模型,分别建立截获过程的4个窗口函数子模型,研究截获概率与窗口函数变量的影响关系。以SPS-48雷达为辐射源,仿真分析各窗口函数变量对截获概率的影响程度,讨论分区策略下无源雷达参数优化对截获概率的影响并总结截获概率提高方法,为无源雷达设计、研制、试验以及使用提供技术支撑。     

基于排队论模型的轮询协议数据链系统时延分析

基于数据链系统的作战方式已经成为了现代化战场的主流,战争中战机稍纵即逝,因此,分析数据链系统的信息传输时延特性意义重大。针对数据链系统信息传输时延问题,分析了数据链系统传输命令消息,目标消息以及中继消息的一般过程,并给出了排队论模型。根据排队论的相关知识得到了轮询协议数据链传输时延的公式,最后利用仿真软件进行了分析研究。     

Many‐server loss models with non‐poisson time‐varying arrivals

This article proposes an approximation for the blocking probability in a many‐server loss model with a non‐Poisson time‐varying arrival process and flexible staffing (number of servers) and shows that it can be used to set staffing levels to stabilize the time‐varying blocking probability at a target level. Because the blocking probabilities necessarily change dramatically after each staffing change, we randomize the time of each staffing change about the planned time. We apply simulation to show that (i) the blocking probabilities cannot be stabilized without some form of randomization, (ii) the new staffing algorithm with randomiation can stabilize blocking probabilities at target levels and (iii) the required staffing can be quite different when the Poisson assumption is dropped. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 177–202, 2017     

滑模控制的新型双幂次组合函数趋近律

提出一种基于双幂次组合函数趋近律的新型滑模控制方案。与现有的快速幂次或双幂次趋近律相比,具有更快的收敛速度,同时还保持了全局固定时间收敛特性,收敛时间上界与滑模初值无关。当系统存在有界扰动时,能够使滑模变量在有限时间内收敛到稳态误差界内,同时其稳态误差要小于现有方法的。仿真实验验证了该方法的有效性及理论分析的正确性。     

基于复杂排队系统的三值光学计算机服务模型与性能分析

三值光学计算机的运算请求处理过程缺乏合理、系统的性能评价标准与体系。基于M/M/1、M/M/n、M~X/M/1和M/M~B/1构成的复杂排队系统,构建三值光学计算机的四阶段服务模型,同时建立立即调度和结束时调度两种策略和算法。基于不同排队系统讨论运算请求的接收时间、预处理时间、运算时间和发送时间的计算方法,进而得到最终响应时间。通过仿真实验对两种策略的模型进行验证,结果表明,结束时调度策略明显优于立即调度策略。     

Does defence expenditure have a spillover effect on income inequality? A cross-regional analysis in China

China’s defence expenditure has been growing rapidly along with GDP growth during the past two decades. Meanwhile, the income gap has continued to increase. There are conflicting views regarding whether the defence expenditure is capable of reducing income inequality. Therefore, this paper investigates the existence of any spillover effect of defence expenditure on income inequality, with a special focus on the regional differences among 31 provinces and 7 military regions in China. We extend panel cointegration and the impulse response function by using panel data during the period of 1997–2012. The empirical results show that the defence expenditure has an impact on income inequality, and the effect varies over different regions in China. The defence expenditure has a spillover effect on income inequality in the full sample panel and the southeastern panel. An increase in the defence expenditure does not crowd out social welfare spending due to the high level of economic development and government expenditure. On the contrary, in the northern panel, the effect is opposite because of the unbalanced economic development levels within the panel. Beijing as the capital of China, benefits more from the expansion of defence expenditure thus widening the income gap. In addition, the impulse response analyses further confirm a stronger effect of the defence expenditure on income inequality in the northern and the southeastern panels over a short period.     

线性调频连续波雷达低空小目标长时间相参积累方法

针对小型无人机目标雷达回波弱、目标检测难的问题,研究了在线性调频连续波(linear frequency modulation continuous wave, LFMCW)体制雷达下的长时间相参积累方法。通过推导LFMCW雷达回波表达式,提出了基于时域差频信号线性调频-Z变换的拉东-傅里叶变换实现方法。评估了该方法的运算量,并与频域实现的方法进行对比。经过仿真和实测数据验证了本文算法对LFMCW雷达下的弱目标相参积累的有效性。     

科学管理、精益管理与精确作战工程保障研究

设计是作战行动筹划的重要步骤,精确工程保障需要对工程保障行动进行精密的设计和精确管理与控制。科学管理采用科学实验的方法,通过劳动方法标准化和差别计件工资制度,有效提高了工作效率,其基本原理经过百余年的实际检验,被证明是一个成熟有效的管理方法。借鉴科学管理理论,需要对工程保障行动进行动作研究,进而研究工程保障行动的作业标准,以期提高其保障效率。精益管理是在科学管理在新的历史时期的发展与改进,它使用了准时制、零库存、均衡生产、持续改进等先进的管理理念和六西格玛管理、成组技术等先进技术,为基于信息系统体系作战的工程保障能力生成提供了有益的借鉴,可加深我们对精确工程保障的理解,促进精确工程保障研究的可操作性。     

基于随机拟合的悬浮式深弹弹阵特征建模

通过分析悬浮式深弹发射后在空中的弹道特性,建立了深弹弹着点坐标的计算模型。采取蒙特卡洛方法,分别对舰艇六自由度状态下,单管和六联装火箭深弹的弹着点坐标进行了仿真计算,对弹着点的分布规律进行了研究,并得出弹着点的联合密度函数。结果表明,在发射参数存在正态扰动下,弹着点散布区域均呈椭圆形分布,弹着点坐标均仍服从正态分布。     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.