点火瞬态过程对复合固体推进剂力学响应特性的影响

根据一个有效的非线性粘弹模型,导出复合固体推进剂微分形式本构方程和应变速率关系式。分析表明点火瞬态过程中压强与推进剂应变、升压速率与推进剂应变速率之间呈线性关系,线性系数均为推进剂初始模量。     

Preservation of stochastic orders for random minima and maxima,with applications

It is shown, in this note, that the right spread order and the increasing convex order are both preserved under the taking of random maxima, and the total time on test transform order and the increasing concave order are preserved under the taking of random minima. Some inequalities and preservation properties in reliability and economics are given as applications. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

潜在故障状态可测的一种故障检查模型

从系统的功能故障状态和潜在故障状态两方面讨论了故障检查模型,基于延迟时间模型推导了系统的期望可用度模型并对其适用性进行了讨论与验证。     

Vondrak-Cepek组合滤波在北斗共视和卫星双向时间比对融合中的应用

为减小卫星双向时间比对(Two-Way Satellite Time and Frequency Transfer, TWSTFT)中的周日效应,利用北斗共视链路没有周日效应的特点,通过Vondrak-Cepek组合滤波方法对中国科学院国家授时中心(National Time Service Center, NTSC)、德国物理技术研究院(Physikalisch-Technische Bundesanstalt, PTB)以及中国计量科学研究院(National Institute of Metrology, NIM)间的北斗共视时间比对结果分别与硬件卫星时间和距离测量设备(SAtellite Time and Ranging Equipment, SATRE) TWSTFT和软件接收机(Software-Defined Radio, SDR)TWSTFT结果进行了融合处理。采用时间偏差和幅值频谱两个指标以及GPS精密单点定位(Precise Point Positioning, PPP)时间比对分别对融合结果进行内外符合评估。结果表明,经过Vondrak-Cepek滤波的融合结果中周日效应基本消失,其与GPS PPP链路差值结果的绝对值保持在链路校准的不确定度范围内。对于长基线NTSC-PTB链路,融合结果1 d的时间偏差稳定度对SATRE和SDR TWSTFT的增益因子分别为1.85和1.81;对于短基线NTSC-NIM链路,融合结果对SATRE和SDR TWSTFT的增益因子分别为1.69和1.59。融合结果的短期稳定度显著提高。     

A melt-cast Duan-Zhang-Kim mesoscopic reaction rate model and experiment for shock initiation of melt-cast explosives

A melt-cast Duan-Zhang-Kim (DZK) mesoscopic reaction rate model is developed for the shock initiation of melt-cast explosives based on the pore collapse hot-spot ignition mechanism. A series of shock initiation experiments was performed for the Comp B melt-cast explosive to estimate effects of the loading pressure and the particle size of granular explosive component, and the mesoscopic model is validated against the experimental data. Further numerical simulations indicate that the initial density and formula proportion greatly affect the hot-spot ignition of melt-cast explosives.     

Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact

Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/AL/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

灭火救援战术演习有关问题探讨

对灭火战术训练法之一———灭火救援战术演习的含义、特点、地位、作用以及演习的组织方式等方面进行了系统论述,为部队更有效地开展灭火战术演习,提高部队灭火救援作战能力,提供理论指导和借鉴。     

GNSS/SINS组合导航在地地导弹中的工程应用

介绍了基于Kalman滤波的GNSS/SINS组合导航技术在地地导弹中的应用,在发射点惯性坐标系中建立了便于工程应用的数学模型,针对某型号进行了位置速度仿真,并和目前在工程实际中应用的加权平均组合方法进行了比较。仿真结果表明,Kalman滤波技术可以应用于地地导弹工程实际中。     

适于卫星闪电监测系统的地面站数目配置初探

闪电监测载荷搭载在不同卫星平台时,地面站对它的观测时间都会发生相应的改变,文中对其进行了计算,并对不同轨道高度下所需的地面站个数作了简要分析。