大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

XNAV中的相对论效应(III)——时空测量值的坐标转换

在文献[1-3]中求得的XNAV基本方程中,时间和距离是指太阳质心系(BCRS)中的坐标量。但在实际测量中,接收机测量的时间是时钟的固有时,接收机的位置一般应以地心系(GCRS)为基准。在相对论框架内完成这两个坐标转换,使得XNAV测量方程能够直接得到应用。最后给出了完整的XNAV高精度测量方程及其在实际测量中的计算过程。     

时敏打击指挥控制技术初探

分析了时敏目标打击链,介绍了压缩打击链的主要途径,描述了图像处理、战场数据管理、武器动态分配、智能代理集成等有关时敏打击指挥控制技术,为时敏打击指挥控制系统的研究提供参考。     

基于主动视觉的摄像机自标定方法

在研究了基于主动视觉摄像机自标定原理的基础上,结合现有的3次平移自标定方法,给出了该标定方法的实现过程。对影响标定精度的主要因素进行分析,提出了极点计算误差对标定精度的影响机理,并在此基础上提出了通过减小极点计算误差来提高标定精度的方法。最后利用该方法进行了对比实验,实验结果证明该方法是有效的。     

基于时域平均的齿轮故障诊断

提出了信号时域平均处理的新算法,解决了周期截断误差对平均结果的影响,并对测取的齿轮箱齿轮故障振动信号进行了处理。实验结果表明:该方法在齿轮故障信号的处理中能够消除背景噪声的影响,取得比较理想的效果。     

非自伴情形下时滞抛物方程的惯性流形

利用Lyapunov-Perron方法在适当的谱间隙条件和适当小的时滞假设下,证明了一类非自伴算子情形下半线性时滞抛物方程惯性流形的存在性。     

高等数学与后续相关课程的成绩统计及数理分析

高等数学是大学教育中的主要基础课,与后续课程有密切联系。通过成绩统计和相关性分析,说明高等数学与其后续相关课程之间的关系和影响,提出数学教学的想法。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于最短拦截时间的异面拦截机动轨道设计与优化

本文构建了单脉冲机动在燃耗约束下的最短时间拦截轨道设计模型与求解方法,将用数学泛函求边值问题转换为高次代数方程的求解计算,并用牛顿迭代法进行快速寻根,仿真结果表明模型及算法准确、有效,满足精度要求。