Mirror,mirror on the wall,who is the most offensive of them all? – Explaining the offensive bias in military tactical thinking

This article explores why the offensive predominates military tactical thinking. With survey results showing an offensive bias among 60 per cent of senior Swedish officers and as many as 80 per cent in the case of the army, it is clear that this is not just a problem of the past but is equally relevant today. The article asks why there is a tendency to perceive and understand offensive tactics as the preferred choice and the way to conduct battle that should be encouraged and preferred. Drawing on existing research and the findings of a pilot study, ten propositions for why the offensive bias exists are tested using a mixed-method approach. Based on the findings, the article develops a model to understand why the offensive dominates military tactical thinking. It is found that the two key constitutive factors behind the offensive bias are military culture and education. These factors most directly and profoundly influence an officer’s identity, perceptions, and thinking. Military culture and education, in turn, work as a prism for four other factors: military history, the theory and principles of war, doctrine and TTPs, and psychological factors.     

电磁发射弹丸飞行弹道仿真

针对电磁发射弹丸飞行弹道进行仿真研究,在建立刚体六自由度飞行弹道模型的基础上,采用时频分析和涡流分析方法,建立电磁-动力学耦合模型分析弹丸出膛时由于膛内振动带来的炮口扰动,采用动网格技术建立电磁-气动耦合模型分析弹托分离产生的气动扰动,从而得到了电磁发射弹丸的飞行弹道模型。以得克萨斯大学先进技术研究所设计的IAT-HVP为例,仿真分析了弹丸以1117 m/s初速、0°射角出膛时弹丸出口扰动对弹体速度和气动特性的影响,并得到其飞行200 m的弹道曲线。仿真结果表明,受电磁发射一体化弹丸出口扰动的影响,弹体落点相比理想弹道产生了24%的偏差,其中炮口扰动引起的偏差最大,其次是弹托分离。     

超声速气流中液体横向射流一次破碎过程

发展显微成像方法获得空间分辨率为1.57 μm/pixel的近场射流瞬态图像,分析超声速气流中液体横向射流表面波演化规律。采用流体体积法获得射流的三维形态及近场流场特征,研究近场流场结构及气液作用。射流的一次破碎过程主要有表面破碎和液柱破碎。其中表面破碎由气液剪切引起的K-H不稳定主导,液柱破碎由气液加速引起的R-T不稳定主导;射流柱表面局部压力的脉动是诱导产生射流迎风面表面波并促使其沿射流方向发展的主要原因;射流柱与超声速气流作用形成背风面回流,近壁面液雾主要由表面破碎及背风面回流输运的液滴组成。     

反电动势对无扰载荷航天器精确定向的影响

无扰载荷航天器中非接触式作动器反电动势会引起有效载荷模块与支持模块之间的耦合,影响有效载荷模块的精确定向性能。通过建立无扰载荷航天器的耦合动力学模型,分析非接触式作动器反电动势对有效载荷模块精确定向性能的影响。考虑六支杆立方构型无扰载荷接口,结合拉格朗日方程和牛顿欧拉方法建立有效载荷模块平台动力学模型。推导非接触式作动器的输出力模型,并引入有效载荷模块平台动力学模型,给出考虑非接触式作动器反电动势的耦合动力学模型。将支持模块上飞轮动静不平衡引起的谐振作为干扰力矩,建立了无扰载荷航天器在轨定向状态的Simulink仿真模型。仿真结果表明,反电动势系数越大,干扰力矩对有效载荷模块的影响越大,有效载荷模块精确定向精度越低。     

新体制导航信号下I/Q幅相不一致对接收机测距零值的影响分析

随着现代化导航信号带宽的增大,由于可以大幅降低采样率,复信号采样的优势日趋明显。由于存在I/Q幅相误差,复信号采样对导航接收机伪距测量造成了一定影响。改进了信道非理想与I/Q幅相误差共同影响BPSK/QPSK信号零值测量的分析模型;在该模型基础上,推导得到了任意I/Q误差和信道非理想特性影响BOC信号伪距零值的模型;探讨了二者在频域抗干扰应用场景下引起的零值变化;理论分析与软件接收机仿真结果高度吻合,误差在1.5×10^-4码片内,证明了分析模型的精确性。该分析方法可用于对高性能导航接收机信道特性进行事先约束及筛选,以确保干扰场景下的零值变化满足要求。     

某型飞机短周期模态特性分析

对纵向短周期模态方程进行了推导和简化,分析了短周期模态的成因和影响的因素,以某型飞机为例计算了本体的短周期模态参数变化规律,分析了其不足,并提出改进方法并进行了计算验证,得到了较好的结果。     

Dynamic coordination of production planning and sales admission control in the presence of a spot market

We consider the decision‐making problem of dynamically scheduling the production of a single make‐to stock (MTS) product in connection with the product's concurrent sales in a spot market and a long‐term supply channel. The spot market is run by a business to business (B2B) online exchange, whereas the long‐term channel is established by a structured contract. The product's price in the spot market is exogenous, evolves as a continuous time Markov chain, and affects demand, which arrives sequentially as a Markov‐modulated Poisson process (MMPP). The manufacturer is obliged to fulfill demand in the long‐term channel, but is able to rein in sales in the spot market. This is a significant strategic decision for a manufacturer in entering a favorable contract. The profitability of the contract must be evaluated by optimal performance. The current problem, therefore, arises as a prerequisite to exploring contracting strategies. We reveal that the optimal strategy of coordinating production and sales is structured by the spot price dependent on the base stock and sell‐down thresholds. Moreover, we can exploit the structural properties of the optimal strategy to conceive an efficient algorithm. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

对接组合体初始姿态影响的建模研究

建立了对接过程对组合体初始姿态影响的解析与数值模型。解析模型采用相对于整体质心的动量矩定理,给出了对接完成后组合体姿态角速度计算的解析表达式。结合追踪器的绝对运动方程和目标器的相对运动方程,建立了基于对接动力学的数值模型。通过单一偏差和组合偏差两种算例,对解析和数值模型得到的组合体初始姿态角速度进行了对比分析。计算结果表明,两种模型绝对偏差在0.07°/s以内,相对偏差在10%以内,另外给出了两种模型在工程任务中各自的适用阶段。     

两种捆绑火箭弹性振动建模方法对比分析及其对姿控系统的影响

针对长助推和短助推两种类型捆绑火箭的不同模态特点,分析了两者弹性振动建模方法的区别和联系,在此基础上建立了某型固体捆绑火箭姿态动力学新模型,模型中基于有限元法导出了弹性振动方程,基于该模型对箭体复杂弹性振动引起的通道间耦合进行了研究,采用逆Nyquist阵列法进行设计。结果表明,该模型能更准确地反映捆绑火箭纵、横、扭耦合运动特性;新模型三通道之间存在弹性耦合,但耦合矩阵具有对角优势性质,采用逆Nyquist阵列法进行姿控系统设计是有效的,仿真结果表明设计的控制器可行,能够取得比较好的性能。     

牵顶伞对大型降落伞抽打现象的作用

对某大型降落伞系统的拉直过程进行多阶段、多有限段和多自由度的动力学建模。通过仿真研究了牵顶伞和剥离带等改进措施对主伞拉直后伞衣抽打现象影响,重点分析比较了带与不带牵顶伞时伞衣位形、抽打速度、偏离距离等参数的变化,分析结果可为大型降落伞的工程设计、改进和使用提供理论支持。