一种基于相位校正的InISAR图像配准新方法

针对InlSAR三维成像中的图像配准问题进行研究,从理论上推导了同一基线上两干涉天线之间图像失配准的原因,并定量分析了图像失配准量对后续干涉处理的影响.研究表明,初始时刻同一基线上两干涉天线间的波程差引起两幅ISAR图像距离方向的亚像素级失配,而成像积累时间内两干涉天线波程差的变化量则引起两幅ISAR图像多普勒方向的像...     

大深度无动力运载器弹道散布影响因素分析

潜射导弹无动力运载器弹道散布特性是导弹后续弹道和运载器分离体水下散布的重要影响因素,决定其散布的主要因素有初始弹道参数和海洋环境扰动等.建立了运载器空间运动数学模型,利用数理统计中的正交试验法安排实验,对不同工况下运载器上浮弹道进行仿真,通过极差分析确定影响因素的主次关系,利用方差分析法和F检验确定影响因素的显著性.仿真结果表明:横向海流对弹道散布半径影响显著,绕x和y轴的初始角速度及横向海流对位移影响不显著.研究结果可以为弹道规划和运载器加工制造提供一定参考.     

弹道修正弹火力分配

相对于无控弹,弹道修正弹的射击精度大幅提高,原有的无控弹的火力分配方案已不适用于弹道修正弹,因此对无控弹与修正弹的集火射击特点进行了研究,提出了一种针对弹道修正弹的均匀分块火力分配方案,仿真实例证明,该方案合理有效,可以根据所要达到的毁伤概率迅速计算出分块形式以及各个分块的瞄准点与耗弹量,便于应用。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

翼伞精确空投系统归航轨迹规划与控制?

翼伞归航轨迹规划与控制问题是翼伞系统在一定初始状态下,利用自身可操作性,完成从初始位置到目标位置的转移问题。针对翼伞空投系统不同归航要求,规划出满足精度要求为圆径概率误差（ CEP ）小于40m的归航轨迹并经过一定量的控制完成翼伞空投系统精确空投任务。首先建立翼伞系统状态空间六自由度模型,并在此基础上提出系统简化稳态模型,通过最优控制方法,规划出满足空投要求的最优归航轨迹后对翼伞进行不断控制直至目标点。最后通过Matlab仿真试验,绘出翼伞系统归航轨迹图与控制变化图。     

Problem of the reference height of the projectile trajectory as a reduced meteo-ballistic weighting factor

This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μ_B (ballistic wind w_B, w_xB, w_ZB, ballistic (virtual) temperature τ_B, ballistic density ρ_B) from the standardized met messages. The weighting factors are used for the calculation of ballistic elements μ_B that are incorporated into the trajectory calculations characteristics of weapon and ammunition. Two different methodologies practically used in the praxis are analysed and compared. For the comparison of the two methodologies the reference height of trajectory determined from the weighting factor functions is employed. On the basis of the analyses conducted, the potential for further increase in accuracy of these aiming angles preparation methods is pointed out.     

基于NMPC的战斗机末端机动规避策略

利用非线性模型预测控制（nonlinear model predictive control,NMPC）的思想建立了战机末端规避导弹的机动策略求解方法。根据导弹与战机的空战态势,建立了导弹与战机的相对运动微分方程;将导弹的导引律引入到导弹运动模型中,与飞机模型一起构建了系统预测模型,并对飞机和导弹的运动约束进行了分析。通过对导弹结构限制和战术特性的分析,给出了飞机机动规避导弹的性能指标,进而建立了机动规避导弹的最优控制模型。利用高斯伪谱法对模型进行求解,采用滚动优化策略实现了对机动规避策略的闭环求解。针对导弹气动参数和导航比未知以及相对测量量具有噪声的问题,利用极大似然法对导弹的气动参数和导航比进行估计,实现了对系统预测模型的反馈校正。仿真结果表明,此方法能够实现对导弹的机动规避。     

临近空间高超声速目标拦截弹弹道规划

利用弹道规划设计了针对临近空间高超声速飞行器的拦截弹道。分析了临近空间高超声速目标拦截问题,将其定性为临近空间的远程高超声速拦截,并提出弹道规划需求;设计了一种两级助推的拦截弹,建立了考虑地球曲率和自转的拦截弹质点平面运动模型;根据弹道规划需求设计弹道约束,以末速最大、与终点距离误差最小和全程热量最小为指标建立拦截弹弹道规划问题;采用粒子群算法求解弹道,结果表明:符合约束的规划弹道是高抛再入形式,与比例导引弹道和准最佳弹道相比,拦截弹大部分时间飞行在大气层外,有效降低了气动热效应影响和对弹体材料的性能需求,且为末制导段提供良好的初始工作环境。     

平流层飞艇高能激光武器防御弹道导弹

防御弹道导弹逐渐受到世界各国的重视,扩大拦截窗口是重要的发展趋势之一。平流层飞艇有可能通过艇载激光武器或者中继反射地基激光两种方式拦截自由段弹道导弹,为评估这两种方式的拦截效果和可行性,本文分析了平流层飞艇搭载高能激光武器的可能性以及中继反射作战方式的特点,建立了激光烧蚀模型,采用数值计算方法对激光的烧蚀效果进行了研究,结果表明平流层飞艇部署位置应距离导弹发射点800～1000km,平流层中继激光飞艇能够在短时间内引爆弹头,艇载激光武器采用烧蚀弹头防热层的方法同样可以达到拦截弹道导弹的目的。     

科氏流量计信号频率的变步长直接估计算法

研究科氏流量计频率估计方法对提高其测量精度具有重要意义.分析了变步长直接频率估计( VS-DFE)方法的原理,归纳出一种基于VS-DFE的科氏流量计信号频率估计算法,给出了算法基本思想、流程和实现步骤.分别针对两种常见流量状态下科氏流量计的固定频率信号和时变信号进行仿真分析,并与离散频谱校正法进行了比较.仿真结果表明,...