油料装备中发动机与油泵的匹配设计探讨

油料装备中发动机与油泵的合理匹配是设计中需解决的一个重要问题。介绍 了油料装备发动机与油泵的匹配原则,分析了油泵和发动机工作时所需的动力,发现发动机 在驱动油泵时具有一定的功率储备,尤其是共用发动机具有较大的功率储备,提出利用发动 机万有特性曲线进行匹配设计。     

基于改进整型遗传算法的稀疏矩形平面阵列优化

为了降低固定稀疏率、固定孔径的稀疏矩形阵列的峰值旁瓣电平,提出一种改进整型遗传算法。该算法在整型遗传算法的基础上,提出了等间隔采样的交叉策略、多点变异策略以及优良基因重组的策略。采取等间隔采样的基因交叉方式,可以有效发挥整型编码的优势,从而提高算法的运行效率;为了提高种群的多样性,防止算法陷入局部最优,采用了多点变异策略;采用优良基因重组技术,加快了算法的收敛速度。仿真结果表明,相比传统的二进制和实数编码,整型编码更为直接高效;与用于稀疏矩形阵列优化的相关算法相比,本文所提算法获得了更优的旁瓣电平,证实了算法的有效性和优越性。     

2014nccet:基于SI仿真的高密度存储服务器高速链路设计

针对高密度存储服务器中高速链路结构复杂、信号速率高、链路长度长等特点,在高速链路PCI-E3.0和SAS3.0设计过程中引入全面的SI仿真。通过对高速PCB设计中拓扑结构、材料类型、PCB结构等关键项目进行仿真设计,获得成本最低、性能达标的最优方案;通过全链路有源仿真,预估系统性能,降低系统投产风险;通过系统实际信号测试,验证系统性能完全满足相应规范要求,仿真结果有效可靠。     

地基雷达探测临近空间高超声速目标优化部署方法

为提高地基雷达对临近空间高超声速目标的探测能力,探讨了一种实用高效的地基雷达优化部署方法,对地基雷达探测临近空间高超声速目标的难点和数学模型进行了分析,提出了地基雷达探测临近空间高超声速目标的部署原则和量化指标,建立了地基雷达优化部署模型,并进行了信息素引导性控制的蚁群算法设计。仿真结果表明,该方法可实现多种程式地基雷达的优化部署,提高了地基雷达优化部署效率和可操作性,为地基雷达探测临近空间高超声速目标的优化部署提供了一种新思路。     

Pricing and inventory management during new product introduction when shortage creates hype

In this study, we analyze the joint pricing and inventory management during new product introduction when product shortage creates additional demand due to hype. We develop a two‐period model in which a firm launches its product at the beginning of the first period, before it observes sales in the two periods. The product is successful with an exogenous probability, or unsuccessful with the complementary probability. The hype in the second period is observed only when the product is successful. The firm learns the actual status of the product only after observing the first‐period demand. The firm must decide the stocking level and price of the product jointly at the beginning of each of the two periods. In this article, we derive some structural properties of the optimal prices and inventory levels, and show that (i) firms do not always exploit hype, (ii) firms do not always increase the price of a successful product in the second period, (iii) firms may price out an unsuccessful product in the first period if the success probability is above a threshold, and (iv) such a threshold probability is decreasing in the first‐period market potential of the successful product. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 304–320, 2015     

Chance‐constrained multi‐terminal network design problems

We consider a reliable network design problem under uncertain edge failures. Our goal is to select a minimum‐cost subset of edges in the network to connect multiple terminals together with high probability. This problem can be seen as a stochastic variant of the Steiner tree problem. We propose two scenario‐based Steiner cut formulations, study the strength of the proposed valid inequalities, and develop a branch‐and‐cut solution method. We also propose an LP‐based separation for the scenario‐based directed Steiner cut inequalities using Benders feasibility cuts, leveraging the success of the directed Steiner cuts for the deterministic Steiner tree problem. In our computational study, we test our branch‐and‐cut method on instances adapted from graphs in SteinLib Testdata Library with up to 100 nodes, 200 edges, and 17 terminals. The performance of our branch‐and‐cut method demonstrates the strength of the scenario‐based formulations and the benefit from adding the additional valid inequalities that we propose. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 321–334, 2015     

某火箭炮高低行军固定器设计与仿真分析

根据某火箭炮的特点和行军固定器的设计要求,对比各种锁紧方式的优缺点,为其设计了机械式高低行军固定器,通过计算初步确定了楔形块和驻钩上斜面的倾角、回复弹簧的刚度系数等主要参数。在Adams中仿真行军固定器的锁紧、解锁和受冲击载荷作用的过程,检验其是否能满足使用要求。根据动力学仿真结果得到的载荷数据,在Abaqus中对行军固定器的关键部件支臂进行有限元分析。仿真和计算结果表明:行军固定器可实现自动锁紧,解锁过程所需的手柄力符合设计要求,在冲击载荷作用下锁紧可靠,支臂的刚强度满足要求。     

基于弹道仿真的垂直发射型舰空导弹杀伤区模型

以垂直发射型舰空导弹为研究对象,分别建立了无控段、转弯段和制导段弹道数学模型。通过对弹道进行仿真,获取给定脱靶量的命中点集合,并拟合得到杀伤区。该模型基本满足针对不同高度、速度入侵目标相应杀伤区的解算,所得数据可作为舰艇防空作战指挥决策、编队防空队形配置和编队协同防空作战效能评估、防空火力协同的依据。     

舰载机多机一体化机务保障调度研究

针对舰载机多机一体化机务保障调度问题,以出树、入树的形式描述实际保障过程中并行工序的约束关系,以最大保障完工时间和资源负载均衡性为目标,构建了舰载机多机一体化机务保障非线性多目标混合流水车间调度模型,并设计了一种结合基于Insert的动态邻域爬山搜索策略和并行工序的同步化修正的Memetic算法求解该模型。最后通过实例仿真验证了模型和所提算法的可行性和有效性。     

使用图像优化方法估计水体调制传递函数

针对水体属性的变化使图像复原困难的问题,提出了一种从退化的水下图像中估计自然水体调制传递函数的方法。该方法首先建立了自然水体的调制传递函数与其固有光学特性参数之间的关系,然后采用图像复原技术对图像进行复原,最后使用粒子群优化算法来优化调制传递函数的相关参数。仿真实验表明:该方法能有效对水下图像进行复原,且不需测量水体的光学参数就能估计出自然水体的调制传递函数。该方法用于水下激光成像系统的图像复原可取得明显效果。