松耦合感应电能传输系统的设计

在建立感应电能传输系统互感模型的基础上,结合设计的小功率感应电源试验平台,分析了如何选择该系统的补偿拓扑和谐振频率.根据分析结果搭建了感应电源试验平台,并且通过实验,证明了该系统在额定负载下的输出功率最大.     

利用添加剂改善高原热水采暖性能的研究

通过对高海拔、高寒地区采暖系统现状及存在问题的分析,拟利用添加剂改善常规的热媒水,增大采暖热媒平均温度,进而提高散热器的传热系数及散热量。并通过试验台分别对两种流体热媒的采暖系统表面对流换热系数及散热量进行实测研究。结果表明采用新热媒比以普通水为热媒时,散热器表面对流换热系数提高的平均值约为8．28％,单位面积散热量增加的平均值约为45．71％,取得了理想的效果。     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

围绕J=1/2,2水平椭圆柱的有限长接触熔化

研究相变材料围绕J =1/2 ,2水平椭圆柱在有限长接触时的温差熔化过程 .应用边界层理论求得熔化边界层厚度 ,作用力与熔化速度关系式 .讨论了有关结果 ,并与长椭圆柱以及有限长圆柱的温差熔化的结果进行了比较 ,给出一些有益的结论     

弹性薄板的条形传递函数单元模型

应用改进的条形传递函数方法 ,建立了弹性薄板的二结线四自由度条形单元模型 ,用于分析系统的静力响应。用结线将矩形区域划分为条形单元 ,将边界结线离散 ,以内部结线和边界结点的位移和转角为未知量 ,采用三次插值 ,得到能够与有限元单元耦合求解的超级单元。利用广义函数给出了一种精确积分方法 ,可以得到有关矩阵的显式表达 ,得到提高了求解精度和效率。     

坦克火控系统误差分析及仿真系统设计与实现

分析了坦克火控系统的误差源,并以误差分析问题为背景,设计并实现了一个仿真平台,并将其应用于火控系统设计过程中,为精度分配算法提供支持.仿真系统应用火控系统的基本数学模型,通过模拟实际射击来获得火控系统输入误差与输出误差的传递关系,以此分析各误差源对系统精度影响的敏感程度,帮助设计者选择影响较为显著的误差源来进行修正,从而获得较高的系统精度.     

基于Lambert算法的脉冲精确变轨策略

Lambert问题的求解多以二体假设为基础,从而对精确轨道控制带来不利影响.提出了一种脉冲修正策略,建立了考虑摄动影响的航天器轨道动力学计算模型,在Iambert算法基础上,通过拟牛顿法对变轨脉冲进行修正,消除终端状态误差,从而获得精确的变轨脉冲.将该修正策略用于固定时间精确变轨问题,建立了两层规划模型,并通过算例验证了算法的有效性.     

基于ARX模型和改进蚁群算法的齿轮箱故障诊断

为了提高齿轮箱故障诊断的精度,提出基于ARX模型的齿轮箱建模新方法,从系统固有特性的角度来分析齿轮箱的状态,使用最大最小蚁群算法对反映齿轮箱多变量传递特性的多个特征参量进行特征选择并使用这些特征进行故障诊断。结果表明,该方法既能够有效提高故障诊断的效率和精度,又能有效降低输入条件和负载出现波动对识别结果的影响。     

基于误差传递和逐步回归法的火控系统精度分析

利用坐标变换得到射击诸元解算模型,根据得到的射击诸元解算模型的教学表达式,用隐函数微分法得到每个射击诸元影响因素的误差传递系数,利用精度分析模型建立射击诸元精度表达式.然后用均匀试验设计法确定典型射击条件,在这些典型射击条件下,计算各误差传递系数,根据给定的某组火控系统各设备的精度指标,进而计算火控系统各典型射击条件下的火控系统精度值,并确定合理的精度指标期望值.要获得这组火控系统各设备的精度指标下,任意指定射击条件下的系统精度值,利用已算出的各典型射击条件下的系统精度值,采用逐步回归分析方法,可获得火控系统各射击诸元参数的精度与各射击条件的函数关系近似表达式.