大型降落伞拉直过程中的抽打现象分析

针对某大型降落伞回收系统主伞拉直过程中出现的抽打现象进行了分析,根据其拉直过程的特点将其划分为五个阶段,分别建立了各阶段的实体模型和约束模型,通过模型的组合建立了各阶段的多体动力学模型,将各阶段模型连接进一步组成该型号大型降落伞拉直全过程的动力学模型。仿真分析了该型号大型降落伞出现抽打现象时的伞衣位形、顶部伞衣速度、伞绳和伞衣的偏离距离以及张力的变化,总结了抽打现象形成时的一些特征数据,分析结果可为大型降落伞设计、改进、使用等提供参考。     

火灾调查模拟试验研究

阐述火灾调查中模拟试验的概念、类型以及在火灾调查中开展模拟试验的一般原则和具体方法 ,指出正确认识和掌握火灾调查模拟试验的方法对于科学开展火灾事故调查工作所具有的重要意义。     

防空导弹飞行试验的引战配合性能分析方法

提出了一种对防空导弹的引战配合性能进行量化评价的方法。利用飞行试验数据对导弹目标交会及战斗部杀伤目标过程进行了仿真。     

软件无失效测试数据的统计分析

软件可靠性估计是软件可靠性研究的重要问题之一,文中对分布式软件系统可靠性的评估方法进行了研究,给出了软件系统可靠度的最优置信下限.最后以某大型软件的评估为例,说明该方法的应用.     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

铝热焊接工艺参数优化研究

为获得最佳铝热焊接工艺参数,对拉伸试件进行了正交试验和二次通用旋转组合试验,研究预热温度、加压时间和预留焊缝3因素对接头强度的影响,进而寻求一组使焊接接头强韧性最高的焊接工艺参数组合。利用电子显微镜等对试件拉伸断口进行了分析,通过对比2种开始加压时间下试件的显微组织和性能,研究了这2种方法对接头强韧性的影响。结果表明:采用设计的铝热焊接试验装置和优化出的随焊加压致密化工艺参数,可使焊接接头获得大变形组织,从而获得高的强度和韧性。该项研究可为提高铝热焊接质量提供基础数据。     

基于案件模糊推理的试验装备采办风险控制研究

如何运用科学的手段选择正确的风险控制策略,是试验装备采办风险控制是否成功的关键和基础。针对试验装备采办风险控制进行了研究,分析了试验装备采办风险控制策略,建立了基于案例模糊推理的试验装备采办风险策略选择模型,研究结论有利于更好地识别和规避试验装备采办风险,提高试验装备采办效率。     

引信湿热强化试验技术研究

针对传统引信湿热试验的缺点,以某型引信的电子头组件为研究对象,开展了引信的湿热强化试验技术研究。首先分析了湿热强化应力对缺陷的激发效果,即温度和湿度越高,对缺陷的激发效果越好。在此基础上,设计了湿热强化试验方案,并通过试验,暴露了电子头组件的薄弱环节,为提高其环境适应性奠定了基础,同时体现了湿热强化试验在激发引信潜在缺陷、缩短试验周期和降低试验费用方面的优势。还根据试验的反馈信息,对试验方案进行了优化。     

Φ200高超声速风洞调试和流场校测

介绍了新近建成的马赫数为2.5～7.0的Φ200mm 高超声速风洞(Φ200 Hypersonic Wind Tunnel,HWT-200)调试情况及空风洞流场校测结果.调试校测结果表明,风洞的总温、总压、运行时间等参数完全达到了设计要求,顺利实现了宽马赫数范围下的超声速/高超声速运行;本风洞有较大的实验段流场均匀区,各流场的马赫数均方根偏差全部达到GJB(1179-91)的合格指标,一部分达到了先进指标.风洞运行时间不少于20s,是一座参数范围较宽、运行成本较低、维护方便、可用于空气动力学教学试验和基础性科学研究的设备.