高密度存储服务器高速链路设计与仿真

针对高密度存储服务器中高速链路结构复杂、信号速率高、链路长度长等特点,在高速链路PCIE3.0和SAS3.0设计过程中引入全面的信号完整性仿真。通过对高速印刷电路板设计中拓扑结构、材料类型、印刷电路板结构等关键项目进行仿真设计,获得成本最低、性能达标的最优方案;通过全链路有源仿真,预估系统性能,降低系统投产风险;通过系统实际信号测试,验证系统性能完全满足相应规范要求,仿真结果有效可靠。     

GNSS信号功率增强对调零抗干扰接收机的性能影响

由于卫星端信号发射功率小、信号传播损耗大,到达接收机的卫星导航信号极其微弱,容易被干扰。为有效应对电磁干扰的威胁,在系统层面和用户层面同时采取抗干扰措施将是一种很好的选择。建立调零抗干扰接收机抗干扰能力分析模型,并定量分析信号功率增强对调零抗干扰接收机抗干扰性能的提升效果。结果表明：信号功率每增强10 dB,接收机抗干扰能力可提升3～4 dB,但从提高接收机非极限条件下的接收性能(载噪比、测距定位精度等)的角度,信号功率增强15～20 dB时,接收性能最优。研究成果可为卫星功率增强量的优化设计以及终端抗干扰设计提供参考。     

潜艇对空投鱼雷的防御模型研究

由于空投鱼雷入水点距离潜艇较近,潜艇单靠机动规避摆脱鱼雷跟踪比较困难。针对空投鱼雷的特点,提出了使用噪声干扰器和自航式声诱饵规避敌方鱼雷的对抗方案,分析了噪声干扰器和自航式声诱饵的使用方法并建立了噪声干扰器干扰模型和自航式声诱饵发射扇面模型。通过仿真计算表明:采用本模型确定噪声干扰器和自航式声诱饵的使用方法是可行的。     

被动全向声纳浮标跟踪潜艇的优化布放方法

反潜飞机利用被动全向声纳浮标可以隐蔽地跟踪潜艇,但浮标消耗量大。在满足定位精度的条件下,如何优化布放浮标以便有效增加跟踪时间是一个亟待解决的问题。首先分析了浮标探测性能和浮标群相对位置对定位精度的影响,得到浮标布放的五种基本原则;然后结合水下目标跟踪技术提出了两种用被动全向声纳浮标跟踪潜艇的优化布放方法:一种是利用遗传算法来优化每一枚浮标的布放位置,另一种是将一批次投放2-4枚浮标的多维优化问题简单转换成一维优化问题来确定浮标的布放位置。最后仿真计算了这两种方法的跟踪性能及浮标消耗量。仿真结果表明,两种优化布放方法均能满足跟踪要求,前者的浮标消耗量比后者略少,但后者的投放批次少很多,有利于减少人员的工作量。     

基于SNR的烟幕干扰效果仿真

烟幕对红外等电磁波具有吸收、反射和散射特性,可导致导引头上接收的能量大大衰减,从而降低导弹的命中概率.针对外场烟幕性能测试受气象条件和环境因素的影响较大,对准确评估抗红外烟幕遮蔽性能存在较大困难的情况,结合气象条件从烟幕透过率的变化引起导引头信噪比变化的角度,建立了烟幕干扰效果的评估模型,通过计算机仿真,得出了烟幕对红外制导导弹的干扰效果.通过试验对其中的一些结论进行了实验验证,结果表明计算结果能够与实验数据较好吻合.     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

水下声源引起的水表面横向微波的理论研究

利用水下声信号在水表面引起的水表面横向微波振幅很小的条件,将普遍的流体力学方程线性化,推导出在水下点声源的激励下,水表面产生的二维横向微波色散关系以及波的传播形式。结果表明,二维水表面的横向微波具有和一维情况类似的结果,即具有波长短、传播速度小的特点,因而可以对入射到表面的激光束进行调制,为水下声信号检测奠定了理论基础。     

MgSO4弛豫吸收对水下强声波脉冲传播的影响分析

对水下等离子体放电强声波脉冲实验测量波形进行FFT变换发现,其能量主要集中在100kHz以下的频段内,在这个频段内,海水中存在的一种盐类——MgSO4(硫酸镁)化学弛豫会造成声波的逾量吸收.本文从包含海水中MgSO4弛豫吸收的修正物质状态方程出发,推导了强声波脉冲传播的新的波动方程,并结合具体的数值算法,对强声波脉冲的传播进行了数值模拟,分析了MgSO4弛豫吸收对脉冲波形的传播及频谱的影响.研究表明,MgSO4弛豫吸收对陡峭的冲击脉冲波形具有平滑和展宽作用,使得脉冲的能量更靠近低频.这种效应与球面波阵面的几何扩散相结合,造成了强声波脉冲能量的逾量损失.     

光纤激光水听器的PGC实时全数字解调系统

概述了基于麦克尔逊干涉仪的光纤激光水听器的相位载波零差法(PGC)调制解调原理,通过数学推导及仿真,分析了调制信号和混频信号的频差是导致全数字化解调结果错误的主要因素之一。针对该诱导因素提供了可行的解决方案,并实现了基于DSP的1 MHz采样频率下使用PGC方法的全数字实时解调系统。对低频水声波段800Hz水声信号进行解调,实验结果表明:解调信号波形良好。     

基于CZT的频谱细化算法及应用

针对复杂信号频域特征提取问题,利用Delphi语言编写了Zoom-FFT和基于CZT的频谱细化方法应用软件,以某型坦克传动箱振动速度信号为例进行了对比分析,验证了算法的有效性和程序设计的正确性。结果表明：基于CZT的频谱细化方法具有运算效率高、细化效果好等优点,可以在复杂信号分析中推广应用。