Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

Variable sampling plans for normal distribution indexed by Taguchi's loss function

Taguchi has presented an approach to quality improvement in which reduction of deviation from the target value is the guiding principle. In this approach any measured value x of a product characteristic X brings a loss to consumer in general, where the loss is expressed as a quadratic form with respect to the difference between the measured value x and the target value T of a product characteristic. Then, it is natural to reject the lot which may bring a large loss to consumer. This concept induces us to construct new variable sampling plans based on the Taguchi's loss criterion. In this article, a design procedure of the sampling plans for assuring the loss in the Taguchi's method is proposed. Some numerical results based on the proposed design procedures are illustrated. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 591–603 (1997)     

角度欺骗有源假目标的动力学特性

针对高空高速目标探测过程中可能出现的角度类欺骗有源假目标,从理论上系统地分析了其动力学性质,导出了假目标的动力学方程,并分析了假目标的机械能和动量矩守恒问题。理论分析和仿真试验均表明,具有固定角度欺骗的方位有源假目标其动力学特性和真实目标完全一致,在动力学上是无法鉴别真伪的;除此之外的其他角度类欺骗有源假目标均不满足高空高速目标椭圆轨道特性以及动力学守恒定律,利用这种差异可以在数据处理层对假目标进行鉴别。     

尾流自导鱼雷直进射击系统误差的提前角修正方法

针对尾流自导鱼雷直进射击方式下弹道简化产生的命中结果系统误差问题,采用几何分析法,首先,分析了尾流自导鱼雷的直进射击原理;然后,依据尾流自导鱼雷弹道过程,建立了尾流自导鱼雷命中点偏差的解析计算模型,并分析了该偏差对鱼雷命中效果的影响;最后,研究了消除该系统误差的提前角修正方法。通过实例论证了该修正方法的可行性和有效性。     

基于两阶段抽样法的作战仿真实验方案优选分析

通过作战仿真实验进行实验方案的优选分析研究,分别针对实验方案中的单一实验指标和综合实验指标进行了实验方案优选分析。首先运用两阶段抽样法完成了单一实验指标的实验方案优选分析,进而通过欧几里德贴近度分析了综合实验指标的实验方案优选分析,最后给出了两阶段抽样法在作战仿真实验中进行实验方案优选分析的应用实例。     

便携式自寻的反坦克导弹攻顶弹道研究

便携式反坦克导弹在通过击顶方式打击目标时,要同时满足落角和精度的要求,以达到对目标的毁伤效能。首先推导带落角约束的最优比例导引律;然后设计携式反坦克导弹击顶弹道方案,导弹先出筒无控,以指数规律完成爬升,采用定攻角进行滑翔飞行,弹道末端运用推导的导引律来满足对落点和落角的约束。仿真结果表明,当反坦克导弹攻击不同距离的目标时,该弹道方案具有较强的有效性。     

均匀分布法对集群目标射击效率计算积分表达式

为简化炸点均匀分布条件下对集群目标射击效率计算的表达式,采用"化四个象限积分为一个象限积分"的方法,导出射击幅员在正面和纵深上覆盖集群目标比值数学期望的积分表达式,在此基础上讨论对单个目标毁伤概率计算公式和对集群目标毁伤百分比计算的近似公式,导出射击幅员在正面和纵深上覆盖集群目标比值二阶矩的积分表达式,给出了对集群目标射击效率的算例。结论改进了对集群目标射击效率计算的方法。     

机械抖动偏频激光陀螺静态测角方法

阐述采用机械抖动偏频激光陀螺进行静态角度测量的原理,分析测角随机误差与激光陀螺角随机游走系数、测量时间的关系,通过转台分度误差实验验证了测角随机误差公式。采用排列互比法对测角系统误差和转台分度误差进行分离。实验与理论分析表明,静态测角方法具有良好的环境适应性和稳定性,测角随机误差优于0.26″,系统误差优于1″。最后分析了进一步减小测角随机误差和系统误差的措施。     

潜艇攻击鱼雷最小射程圆内目标的方法

针对潜艇攻击鱼雷最小射程圆内目标的方法问题,首先,给出了不同自导方式下鱼雷最小射程的计算方法,并分析其对鱼雷攻击的影响;然后,依据鱼雷二次转角射击弹道过程,建立了鱼雷二次转角射击通式,并分析了鱼雷二次转角射击需满足的约束条件;在此基础上,深入研究了潜艇攻击鱼雷最小射程圆内目标的具体方法。最后通过实例验证了攻击方法的可行性和有效性。     

旋转自稳定末敏子弹运动特性分析

为研究某型旋转自稳定末敏子弹运动特性,充分考虑末敏子弹的结构强非对称特点和其初始抛撒条件,引入动不平衡弹体模型,推导超大攻角条件下子弹的空间6自由度弹道方程,计算分析子弹的稳态扫描运动特性。结果表明:子弹体的质量分布非对称和初始抛撒角速度是子弹药实现稳态扫描运动的必要条件;子弹扫描频率只由抛撒角速度ω_(σ0)决定,且和ω_(σ0)正相关;初始俯仰角φ_(a0)≥0°时,扫描角整体呈增大趋势,初始俯仰角φ_(a0)0°时,扫描角整体变化趋势为先减小后增大;扫描面积与配重-全弹质量比、初始俯仰角、初始偏航角和初始角速度呈正相关,与均质圆柱体转动惯量比呈负相关。