舰舰协同防空的舰空导弹杀伤区分析

针对舰艇编队协同防空时的耦合杀伤区形状及纵深等问题进行了研究,以定量地对编队耦合杀伤区进行简化描述。分析了单舰对典型目标的杀伤区特性,探讨了舰艇编队的典型防空队形,研究了纵向上递阶多层次、横向上同阶耦合的"递阶封闭圈原理"。以一阶耦合杀伤区为重点,依据攻击目标的不同,将其分成相对航路捷径为零和相对航路捷径均非零两类情况建立了耦合杀伤区纵深的计算模型,并扩展到了高阶耦合的情况。研究了耦合杀伤区与舰舰间距和来袭目标进攻舷角等参数的相互关系以及灵敏度。结果表明建立的模型符合实际,具有一定的指导意义。     

基于Multi-Agent的防空导弹武器系统模型设计

建立科学的结构模型是进行防空导弹武器系统仿真的基础和关键环节。针对防空导弹武器系统的特点,提出了基于Multi-Agent的防空导弹武器系统模型建模方法,设计了防空导弹武器系统模型结构。利用Multi-Agent建模技术,把防空导弹武器系统实体映射成相应的Multi-Agent系统,并以Agent的形式对防空导弹武器系统这一客观复杂系统进行了深刻的认识,为防空导弹武器系统建模仿真奠定了基础。     

OODA-L模式下的智能无人集群作战仿真建模框架

介绍了智能无人集群作战的相关概念,为反映智能无人仿真实体的自主能力和适应能力,提出将学习过程显性化的观察-判断-决策-行动-学习(Observe, Orient, Decide, Act and Learning, OODA-L)模式,并进一步扩展为适用于集群协同的Co-OODA-L模式。在智能无人仿真实体的总体描述上,采用马尔可夫决策过程进行数学抽象处理,提出智能无人Agent的三域分层结构。为体现智能无人集群作战的自主协同、分布式等特点,提出了利用人工神经网络将可变数量的智能无人Agent融合为同构或异构集群进行协同作战建模的体系结构。     

汲取无人机发展经验指导地面无人装备发展建设

军用无人机在实战中的成功应用和陆军较高的作战伤亡比重使得陆军发展地面无人装备的愿望和需求越来越强烈,但当前军用地面无人装备还处于发展的初期阶段,仍未形成完善的作战体系。本文针对如何促进军用地面无人装备发展和建设,加快战斗力生成,提出借鉴军用无人机成熟的发展经验来指导地面无人装备发展和建设的思路,首先论述了无人作战将成为未来战争主要样式的原因,然后简要归纳了军用无人机的发展经验,最后论述了如何根据军用无人机的发展经验来指导地面无人装备发展和建设,希冀这些建议能够为军队地面无人装备的发展建设提供一定参考。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

In order to improve the energy level of fuel air explosive(FAE) with delayed secondary igniters, high energetic metal powders were added to liquid fuels mainly composed of ether and isopropyl nitrate. Metal powders' explosive properties and reaction mechanisms in FAE were studied by high-speed video, pressure test system, and infrared thermal imager. The results show that compared with pure liquid fuels, the shock wave overpressure, maximum surface fireball temperature and high temperature duration of the mixture were significantly increased after adding high energetic metal powder. The overpressure values of the liquid-solid mixture at all measuring points were higher than that of the pure liquid fuels. And the maximum temperature of the fireball was up to 1700 ℃, which was higher than that of the pure liquid fuels. After replacing 30％of aluminum powder with boron or magnesium hydride, the shock wave pressure of the mixture was further increased. The high heat of combustion of boron and the hydrogen released by magnesium hydride could effectively increase the blast effect of the mixture. The improvement of the explosion performance of boron was better than magnesium hydride. It shows that adding high energetic metal powder to liquid fuels can effectively improve the explosion performance of FAE.     

潜艇面临的威胁及潜空导弹

随着网络中心战的发展,潜艇出海作战将面临更大的威胁。着重分析了潜艇的空中威胁,概述了国外装备和正在研制的潜空导弹,并对其进行了分析和比较。     

超声速地空导弹热环境风洞模拟研究

根据国内风洞的情况,比较了超声速地空导弹的飞行条件与风洞模拟能力的差距,分析了热环境风洞实验中应采用的相似准则,以及实验数据的处理方法。     

浅谈舰载燃料空气炸药武器抗击巡航导弹

通过对FAE武器的特种杀伤效果和对巡航导弹相关技战术性能分析,利用FAE武器(云爆弹)的爆轰、冲击波、破片、窒息和电磁电热效应等特种杀伤效果,剧烈改变导弹的工作环境和对巡航导弹的弹体、导引系统、控制系统和发动机等关键部件进行“软”、“硬”破坏,以期达到抗击巡航导弹的目的,同时阐述了装备水面舰艇的可行性。     

履带车辆转向性能指标分析及实验研究

转向性能是评价履带车辆机动性的重要指标之一.文中针对转向角速度、转向半径和转向消耗功率3个指标,分别在不考虑履带滑转滑移的理想条件下和考虑履带滑转滑移的实际情况下,对履带车辆的转向性能进行了讨论和分析,对2种条件下履带车辆的转向性能的变化进行了比较.为了对履带车辆在转向过程中履带的滑转和滑移程度进行定量的分析,定义了履带的滑转和滑移系数.通过实车实验,对分析结果进行了验证.