变速跳频通信抗跟踪干扰性能的研究

针对常规跳频通信抗跟踪干扰能力差的问题,分析跟踪干扰原理,提出变速跳频通信。建立数学模型,在干扰容限、压制比和追踪概率方面进行理论分析,分析变速跳频通信抗跟踪干扰对误码率的性能,并用MATLAB进行仿真验证。     

基于FPGA的可变速率PSK数字解调器实现

针对QPSK变速率调制数字系统,提出了一种新的基于现场可编程门阵列(FPGA)实现方法,该系统可以支持4.88 Kb/s到2 Mb/s和更高的连续比特速率。设计采用混合乘法器、数控振荡器(NCO)和积分-梳状滤波器(CIC),并给出了系统中载波和信号恢复电路的设计结构,且可以移植到任何FPGA器件。提出的设计在Xilinx Virtex-5 FPGA平台进行了硬件测试。硬件实现结果显示,采用本方法实现的解调器,表现出优越的使用效率。     

Economic design of a two-stage control chart based on both performance and surrogate variables

The traditional approach to economic design of control charts is based on the assumption that a process is monitored using only a performance variable. If, however, the performance variable is costly to measure and a less expensive surrogate variable is available, the process may be more efficiently controlled by using both performance and surrogate variables. In this article we propose a model for economic design of a two-stage control chart which uses a highly correlated surrogate variable together with a performance variable. The process is assumed to be monitored by the surrogate variable until it signals out-of-control behavior, then by the performance variable until it signals out-of-control behavior or maintains in-control signals for a prespecified amount of time, and the two variables are used in alternating fashion. An algorithm based on the direct search method of Hooke and Jeeves [6] is used to find the optimum values of design parameters. The proposed model is applied to the end-closure welding process for nuclear fuel to compute the amount of reduction in cost compared with the current control procedure. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 958–977, 1999     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。     

随机-区间混合不确定性单输出模型确认指标

针对既有随机变量又有区间变量的模型预测结果与实验数据之间的一致性度量问题,对随机-区间混合不确定性模型确认指标进行研究。根据工程数学模型和实验过程中的不确定性来源,分析随机-区间混合不确定性模型确认的特点;运用概率方法和区间理论,提出新的随机-区间混合不确定性模型确认指标,讨论所提指标的性质,给出指标的计算方法和步骤。通过数字算例和工程算例,验证了所提指标的可行性和有效性。     

六相无刷直流电动机谐波转矩的分析与计算

无刷直流电动机具有诸多优点,但运行中仍然存在转矩脉动问题.分析了六相无刷直流电动机的工作原理,推导了六相无刷直流电动机的状态方程,采用状态变量法对电机转矩产生的关键量--反电势波形和电流波形进行了仿真和试验研究,对六相无刷直流电动机的谐波转矩进行了分析和推导,得出了通过减小电流滞后角可控制甚至消除正弦谐波脉动转矩的结论.     

Simultaneous determination of production and maintenance schedules using in‐line equipment condition and yield information

In many manufacturing environments, equipment condition has a significant impact on product quality, or yield. This paper presents a semi‐Markov decision process model of a single‐stage production system with multiple products and multiple maintenance actions. The model simultaneously determines maintenance and production schedules, accounting for the fact that equipment condition affects the yield of each product differently. It extends earlier work by allowing the expected time between decision epochs to vary by both action and machine state, by allowing multiple maintenance actions, and by treating the outcome of maintenance as less than certain. Sufficient conditions are developed that ensure the monotonicity of both the optimal production and maintenance actions. While the maintenance conditions closely resemble previously studied conditions for this type of problem, the production conditions represent a significant departure from earlier results. The simultaneous solution method is compared to an approach commonly used in industry, where the maintenance and production problems are treated independently. Solving more than one thousand test problems confirms that the combination of both features of the model—accounting for product differences and solving the problems simultaneously—has a significant impact on performance. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

纯方位TMA的变增益扩展卡尔曼滤波算法

通过对水下纯方位目标运动分析中的扩展卡尔曼滤波(EKF)算法的分析,利用方位新息,构成了一条反馈回路,从而将EKF算法改进为变增益扩展卡尔曼滤波(VGEKF)算法.对比仿真分析表明,VGEKF较之EKF滤波效果有所改善,增强了稳定性,提高了精度,为水下纯方位目标运动分析的实现提供新的途径.     

解耦的三轴气浮台非线性模糊变结构鲁棒控制问题

针对飞行器全物理仿真三轴气浮台这一具有不确定性的、耦合的非线性系统,对其动力学耦合和可解耦性问题进行了分析、计算和证明.通过综合变结构控制和模糊控制,给出了一种新的非线性控制系统设计方法,此方法既可以避免变结构控制所固有的颤动现象,同时由于该模糊控制律的解析性,所以也具有实现简单,易于工程化的优点.仿真结果表明,给出的模糊变结构控制,对飞行器模型不确定性和外来干扰具有较强的和良好的跟踪性能.     

转换触发器功能的分离变量法

本文选择“转换逻辑”输入变量中的Q~n真作为分离变量来处理,把Q~n分离出来后,只需要通过简单的逻辑推理便可得到与通常使用的图形法及公式法相同的转换结果。