基于到达时差法的目标定位系统

运用声被动定位理论探索空中目标的定位问题。建立了一种平面波声被动定位模型,利用简易被动声传感器阵列,分析并设计了定位系统的总体结构。提出了一种简易的计算到达时差电路设计方案,此电路利于目标的实时定位。在利用这种系统定位远距离目标时,可消除有效声速的影响。最后给出了几组实验结果,证明了此系统的可行性,但对近距离目标的定位结果较差,模型需进一步研究。     

Compensating military veterans in South Africa

This article outlines the widespread needs of South African military veterans and the possible consequences if the promises made in the recent Military Veterans Act are not met. The first part of the article defines who generally qualifies as a military veteran, how they are typically compensated in various countries with specific reference to neighbouring southern African countries, and what the consequences are when veterans become disenchanted with the state. The second part focuses on South Africa and the recent debates on military veterans and their entitlements. With reference to the findings of a qualitative study conducted among military veterans, parliamentary debates and media reports, an assessment is made of the demands and affordability of promised benefits and the consequences should the state not deliver. The conclusion is reached that heightened expectations are presently frustrated by slow roll-outs, and this is likely to increase the possibility of protest action. This has now the potential to create further tension within the ruling party and civil society, as the pressure on public finances mounts and demands become unsustainable. The effect this may have on political stability will depend on how the government manages this issue.     

弹丸初速对磁阻型线圈发射器发射性能的影响分析

通过设置弹丸初速并研究其对单级磁阻型线圈发射器发射性能的影响,模拟分析前一级线圈弹丸出口速度对后一级线圈发射性能影响的规律;利用Ansoft有限元仿真软件进行了动态仿真,得到弹丸初速对单级磁阻型线圈发射器驱动电流、驱动线圈感应电压、电磁力、弹丸出VI速度、弹丸位移及能量转换效率等影响的规律．研究表明：弹丸初速越大,经过单级线圈加速后弹丸出口速度也越大,但弹丸出口速度增量减小;随着弹丸初速增大,能量转换效率呈现先增大后减小的趋势．     

机动飞行条件下基于SIFFBP算法的机载UWB SAR成像

机动飞行条件下,运动误差的幅度较大,频域运动补偿精度难以满足机载超宽带合成孔径雷达(UWB SAR)高精度成像的要求,需要采用精确的时域后向投影(Back Projection,BP)算法,然而原始BP算法的巨大计算量限制了其实际应用。提出了一种基于子图像快速因式分解BP(Sub-image Fast Factorized BackProjection,SIFFBP)算法的机动飞行条件下机载UWB SAR成像方案,并对其子孔径和子图像划分的约束关系进行了推导,给出了算法步骤,并分析了算法的计算量。仿真和实测数据处理结果表明,SIFFBP算法能够在保证处理精度的同时,大幅度提高处理效率,非常适合于机动飞行条件下的机载UWB SAR成像处理。     

Investigations on influence of rifle automatics system action on values of energetic efficiency coefficient of muzzle brakes

The objective of the paper was to compare values of the muzzle brake efficiency coefficient for a rifle with active or inactive automatics systems. Special laboratory stand designed for investigating the recoil process was used. The motion of the rifle was detected by the use of the laser interferometer and the optical camera. The recoil velocity time courses were determined by smoothing and differentiation of experimental position records. The results of the experiments indicated that in the case of an active automatics system two values of the recoil velocity can be used for calculation of the energetic efficiency coefficient: the maximum recoil velocity and the final recoil velocity at the end of the automatics action cycle. The values of the coefficient, calculated using these two values of the recoil velocity, distinctly differ. However, it was shown that their values indicate the same relation between the efficiency of various muzzle brakes. The value of the efficiency coefficient, determined on the basis of the final recoil velocity value, is practically the same as that determined on the basis of the final recoil velocity value for the rifle with an inactive automatics system.     

One size does not fit all: personalized incentives in military compensation

A critical element in implementing a compensation scheme including nonmonetary incentives (NMIs) is recognizing that preferences vary widely across Service members. There are at least three sources of variability: across different population classes, across individuals within a population class, and across NMI packages for a particular individual. Surveys across different military communities, ranks, and years of Service show the difficulty of identifying any NMI that has significant value for even 50% of the active duty force. At the same time, approximately 80% of the surveyed Service members expressed a significant positive value for at least one NMI. Therefore, one-size-fits-all incentive packages will not be nearly as effective as more personalized incentive packages. The authors discuss variability in Service member NMI preferences and outline an approach to implementing personalized NMI packages in military compensation through a sealed-bid reverse auction, where Service members select individual NMIs from a “cafeteria-style” menu of options.     

钢管在冲击荷载作用下的变形与失效破坏

为研究钢管在弹体侵彻过程中的变形特点,基于ANSYS/LS-DYNA软件,采用Johnson-Cook模型,模拟了半球形弹体以不同速度正向冲击钢管时的非线性动力响应情况。结果表明：弹体速度越小,钢管的抗侵彻性能越好;弹体速度越接近临界破坏速度,钢管降低弹体速度的能力就越明显;弹体冲击钢管时,钢管上表面比下表面更容易产生大变形,消耗更多的弹体动能,并在抗侵彻过程中伴有局部凹陷、蝶形变形和贯穿现象。实验结果可为圆柱壳结构钢管在冲击荷载作用下的耗能分析提供参考。     

新型舰炮使用测速雷达后观测距离偏差射击校正方法

针对测速雷达精确校正初速后的观测距离偏差校正方法进行研究,建立不同校正方法校正量计算模型,对比分析不同校正方法校正精度,得出了使用测速雷达精确校正初速后观测距离偏差应采用折合空气密度校正精度高的结论,为中大口径舰炮部队作战与训练和装备的研制改进提供依据。     

Study of nano-nitramine explosives: preparation,sensitivity and application

Nano-nitramine explosives (RDX, HMX, CL-20) are produced on a bi-directional grinding mill. The scanning electron microscope (SEM) observations show that the prepared particles are semi-spherical, and the narrow size distributions are characterized using the laser particle size analyzer. Compared with the micron-sized samples, the nano-products show obvious decrease in friction and impact sensitivities. In the case of shock sensitivities, nano-products have lower values by 59.9% (RDX), 56.4% (HMX), and 58.1% (CL-20), respectively. When nano-RDX and nano-HMX are used in plastic bonded explosives (PBX) as alternative materials of micron-sized particles, their shock sensitivities are significantly decreased by 24.5% (RDX) and 22.9% (HMX), and their detonation velocities are increased by about 1.7%. Therefore, it is expected to promote the application of nano-nitramine explosives in PBXs and composite modified double-based propellants (CMDBs) so that some of their properties would be improved.     

Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.